Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 04-29-03, 01:26 AM   #1
bolsh
Registered User
 
Join Date: Apr 2003
Posts: 2
Default NvAGP + AGP GART

Hi guys,
I would love some advice. Bear with me while I give you the essentials...

I am currently running RH7.3 with kernel upgraded to 2.4.18-27.7xsmp using XFree86 version is 4.2.0 (RH 4.2.0-8).
GFX Card is nvidia quadro4 750 and I am using the 4349 drivers.

The motherboard chipset is an e7505.
I get these errors in /var/log/messages

kernel: agpgart: Unsupported Intel chipset (device id: 2550), you might want to try agp_try_unsupported=1.
insmod: /lib/modules/2.4.18-27.7.xsmp/kernel/drivers/char/agp/agpgart.o: init_module: No such device
insmod: /lib/modules/2.4.18-27.7.xsmp/kernel/drivers/char/agp/agpgart.o: insmod agpgart failed
kernel: 0: NVRM: AGPGART: unable to retrieve symbol table

In my XF86Config-4 file I have this line
# Option "NvAgp" "1"

The resultant effect is that there are spontaneous X Session restarts.
When I use agp_try_unsupported I get

kernel: agpgart: Trying generic Intel routines for device id: 2550
kernel: agpgart: AGP aperture is 64M @ 0xf4000000

The X Session no longer spontaneously restarts.


Obviously the try_unsupported resolves my issue.
My questions are:
Do I need to get agpgart to load?
I know the line in XF86Conf is commented out. I was told that by default NvAgp is set to 1. Does this mean I am currently using NvAGP?
Do I need to uncomment out the line?

I was told by my (international) vendor that NvAgp defaults to 1 so I dont need it in my XF86Conf (and the conf file they provided does not have this in it)
and I was told that NvAGP is a substitute for AGPGART so I should ignore the error messages because they dont mean anything because NvAGP is doing the job of AGPGART.

Can someone enlighten me as to what the real story is?
What settings SHOULD I be using for this card with these drivers? etc

Any advice is greatly appreciated

bolsh
bolsh is offline   Reply With Quote
Old 04-29-03, 02:17 AM   #2
Andy Mecham
l33t master
 
Join Date: Jul 2002
Location: Santa Clara, CA
Posts: 1,163
Default

NVAGP defaults to 3 - try AGPGART, then try NVAGP. As AGPGART is failing, you'll fall back to NVAGP. You can tell which one you're using by checking the contents of /proc/driver/nvidia/agp/status.

Your vendor was mistaken about the default setting for NVAGP, but they're correct about ignoring the warning messages. The E7505 is not a chipset that AGPGART supports - when it bails out, NVAGP loads.

--andy
__________________
Andy Mecham
NVIDIA Corporation
Andy Mecham is offline   Reply With Quote
Old 04-29-03, 03:21 AM   #3
bolsh
Registered User
 
Join Date: Apr 2003
Posts: 2
Default

Thanks so much for your swift reply Andy.

I guess all I really need to know now is what you/NVidia recommends?

Is it better to just use NvAGP and ignore the agpgart error messages?

or am I better off using AGPGART, inserting it by using the agp_try_unsupported (the only way that I could insert it) ?

Am I losing functionality elsewhere by using agp_try_unsupported that wouldn't be lost by using NvAGP?

I have machines using both nvagp and agpgart for testing.
Both have:
Fast Writes: Disabled
SBA: Disabled

Is there any benefit to enabling these for 3d modelling/animation (or for any other reason)?
If so, how do I enable them?

Im sure this is documented somewhere but only having seen them you can probably save me the time

Thanks so much again

Bolsh
bolsh is offline   Reply With Quote
Old 04-29-03, 03:57 AM   #4
rohitntu
Registered User
 
Join Date: Jan 2003
Posts: 5
Default SBA and Fast Writes

Hi Andy,

Could you please advise how I can enable SBA and Fast Writes on the E7505 chipset? The latest 4363 driver did not help. I'm using NvAGP I believe.

I am seeing very poor performance with glCopyPixels, I'm using Quadro 580 XGL. (glDrawPixels seems to be fast enough)

Please advise.

Regards,
Rohit
rohitntu is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
POSSIBLE AGP TROUBLE (mandrake 9.0) chrono86 NVIDIA Linux 4 10-12-02 01:09 PM
Gentoo and agp trouble john36 NVIDIA Linux 2 09-12-02 11:36 PM
How much heat can a GeForce4 Ti 4600 handle? Velkator NVIDIA GeForce 7, 8, And 9 Series 4 09-03-02 05:41 PM
X freezes when agp 4x is enabled jinksed NVIDIA Linux 1 08-07-02 05:56 PM
Will AGP 8X increase performance over AGP 4X? sancheuz NVIDIA GeForce 7, 8, And 9 Series 10 07-29-02 09:37 PM

All times are GMT -5. The time now is 04:08 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.