Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 05-02-03, 07:35 AM   #1
zent
Registered User
 
Join Date: Apr 2003
Posts: 5
Angry Xserver black screen - logfile attached

Hello,

we bought a couple of new PCs and try to run them using Debian 3 (Woody).

First the specifications.

Hardware:
AMD Athlon XP 2400+
Epox 8RDA Motherboard (Nforce 2)
SMC Network Card

Video Card:
AOpen Geforce4 MX 440

Information from /proc/driver/nvidia/cards/0

Model: GeForce4 MX 440 with AGP8X
IRQ: 5
Video BIOS: 04.18.20.15.c3
Card Type: AGP


Software:

Debian GNU/Linux 3.0r1
Nvidia Installer Version 1.0-4363

Whenever we try to start the XServer the screen wents black and you cannot work on a local shell anymore. Remote access via ssh is still possible.

Attached is a logfile using the new 4363 driver.

Has anyone any Ideas?
Attached Files
File Type: txt xfreelog.txt (8.2 KB, 184 views)

Last edited by zent; 05-02-03 at 08:00 AM.
zent is offline   Reply With Quote
Old 05-02-03, 07:57 AM   #2
zent
Registered User
 
Join Date: Apr 2003
Posts: 5
Default

... and here our XFree86Config.
Attached Files
File Type: txt xf86config-4.txt (3.1 KB, 187 views)
zent is offline   Reply With Quote
Old 05-06-03, 04:12 PM   #3
Spirit[Si]
Registered User
 
Join Date: May 2003
Posts: 7
Default

Hello,

I have exactly the same problem as you do and my hardware is similar to yours.

AMD Athlon XP 2400+
Abit NF7 motherboard, Nforce2 based
Gainward Geforce4 MX460 graphics

I'm running Gentoo Linux 1.4_rc4 and I've tried nvidia drivers 1.0-4363 and 1.0-4349 but with the same problem. When starting X, I get a black screen and X is then locked. I can access my machine using ssh, so it is only X that has frozen the terminal. I can do a kill -9 on the X server which at this point gives me 100% CPU usage. Once that is done, all I can do is reboot because the console is wasted. Once X is killed, I can however type to the console, but it is impossible to see what I write since its all scrambled, possibly because the monitor is still in graphics mode.

I'm using a 2.4.20 kernel, the "xfs" one. This seems to be one of the few kernels that has support for the nForce2 IDE controler and support for the nForce2 USB controllers at the same time. Newer kernels will not boot with USB enabled and older kernels doesn't have working IDE support.

My logs are pretty much the same as yours, everything seems to be fine, except that all I get is that annoying black screen.

X version is 4.3. The nv driver that comes with X works fine.

/Spirit
Spirit[Si] is offline   Reply With Quote
Old 05-07-03, 09:28 AM   #4
Emphroon
Registered User
 
Join Date: May 2003
Posts: 13
Default

Hi,

No panic. It has something to do with the latest BIOS for the EPOX mobo. It seems that downgrading to BIOS version 3129 solves the problem.

Epox released a new beta version of the BIOS which you can download from:

http://www.aoaforums.com/forum/showt...0&pagenumber=1

Maybe this solves the problem, I did not test myself.

P.
Emphroon is offline   Reply With Quote
Old 05-07-03, 10:32 AM   #5
Spirit[Si]
Registered User
 
Join Date: May 2003
Posts: 7
Default

Hi,

I'm not running the latest bios for the EPOX mobo on my ABIT mobo, so that doesn't help me much.

/Spirit
Spirit[Si] is offline   Reply With Quote
Old 05-17-03, 06:36 AM   #6
Emphroon
Registered User
 
Join Date: May 2003
Posts: 13
Default

Hi Zent,

Have you tried to put all your devices to IRQ5? Disable IRQ10, 11 and 12 in your BIOS, but make sure that the MIDI still points to IRQ10 (otherwise your devices get no IRQ mapping at all).

This solved the problem for me. Downgrading to BIOS 3129 killed my mobo...

For some reason the Epox BIOS cannot handle interrupts >= 10 properly.

My /proc/interrupts:

CPU0
0: 312717 XT-PIC timer
1: 11953 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 1225416 XT-PIC usb-ohci, usb-ohci, NVIDIA nForce Audio, bttv, eth0, btaudio, nvidia
8: 1 XT-PIC rtc
14: 25826 XT-PIC ide0
15: 201 XT-PIC ide1
NMI: 0
ERR: 0


Currently running nVidia 1.0-4363 on an Epox EP-8RDA+ with a GeForce4 Ti4200/128.

Cheers

P.
Emphroon is offline   Reply With Quote
Old 05-18-03, 05:27 PM   #7
zent
Registered User
 
Join Date: Apr 2003
Posts: 5
Talking You're the man!

Thank's a lot Emphroon that really helped us out.
Your suggestions work for us!!

We didn't not only kill one but three Mobos trying to downgrade the bios version. :-(

Then we swichted to Suse 8.2 which did not have that problem, but now we can install debian again.

Do you think that disabeling the IRQs will slow down system performance?

Thanks again!

zent
zent is offline   Reply With Quote
Old 05-19-03, 04:21 PM   #8
Emphroon
Registered User
 
Join Date: May 2003
Posts: 13
Default

Hi zent,

I'm happy that my suggestions works for you. But maybe you should thank mr. hmepas at thread

http://www.nvnews.net/vbulletin/show...&postid=124645

from whom I've got the solution!

Anyway, I am running Slackware 9.0 kernel 2.4.21rc1 with this IRQ configuration for 3 days now, and I do not have any significant performance loss. The only problem I notify is the sounddriver (i810_audio) which sometimes is not available to other applications. But then again, this module already has some known problems, it might be the driver itself.

Furthermore, USB, tv-card etc. work perfectly OK.

Cheers

Peter.
Emphroon is offline   Reply With Quote

Old 05-20-03, 02:09 PM   #9
zent
Registered User
 
Join Date: Apr 2003
Posts: 5
Default Only IRQ11

Hi,

we just tried some different configurations and found out that for our system IRQ11 is the troublemaker.

If we disable only IRQ 11 everything works charming.

Maybe you can bring all the other IRQs back to life again, too.

Bye

zent
zent is offline   Reply With Quote
Old 05-20-03, 04:14 PM   #10
Emphroon
Registered User
 
Join Date: May 2003
Posts: 13
Default

Well, that doesn't work. I can enable IRQ#10, but to this one the MIDI gets assigned to.

If I only disable IRQ#11 then some devices get assigned to IRQ#5 and 12, but I get the same old story again: black screen.

So it appears that I have to disable at least IRQ#11 and 12 to get the driver running.

Just for sake of curiosity, what is your BIOS version? Mine is from 7-5-2003.

P.
Emphroon is offline   Reply With Quote
Old 05-22-03, 10:12 AM   #11
zent
Registered User
 
Join Date: Apr 2003
Posts: 5
Default bios version

we have two different versions.

they are from 02.04.2003 and 05.03.2003.

Both types work with this settings.
zent is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
GT240M - black screen with newer drivers > 275.33 and win 7 doktor5000 NVIDIA GeForce 200 Series 1 07-08-12 12:17 PM
[9800gt] Xorg black screen after installing nvidia driver HacKurx NVIDIA Linux 1 06-07-12 02:29 PM
Black screen after switching between graphical virtual consoles five times rrr-wtf NVIDIA Linux 1 05-21-12 05:40 PM
Black screen and lockup on startx. redmoose NVIDIA Linux 4 09-18-02 12:53 PM
kernel 2.4.19 and 2960 -> black screen osterhase NVIDIA Linux 7 08-22-02 07:24 PM

All times are GMT -5. The time now is 03:57 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.