|05-03-03, 04:42 PM||#1|
Join Date: Apr 2003
Side Band & Fast Write
when i do cat /proc/driver/nvidia/agp/status
AGP Rate: 4x
Fast Writes: Disabled
How do I enable Fast Writes and SBA??
Any help would be really appreciated.
|05-03-03, 04:51 PM||#2|
Join Date: Sep 2002
They're disabled by default because they cause stability problems on some systems.
That said, I don't have any problems when I turn them both on, but YMMV.
First, make sure that both your video card and motherboard chipset are reporting that they support both fast writes and SBA -- do this by looking in the other files in /proc/driver/nvidia/agp -- that is, host-bridge and card.
If they do, then set your distro up to pass a pair of options to the "nvidia" kernel module. If your nvidia module is getting loaded by modules.conf, then you can add a line reading options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1 to that file, run /sbin/depmod -a as root, and then unload and reload (from memory -- don't delete it off your system ) the kernel module.
If your distro uses an rc.modules file that calls /sbin/modprobe on a bunch of modules, then just add the NVreg_* stuff after the nvidia modprobe command (on the same line).
If your distro uses something like /etc/modules, which is just a list of modules to load at boot time, then I think you can add the options right after "nvidia" (again, on the same line) in that file, but I don't know for sure.
Registered Linux User #219692
|Thread||Thread Starter||Forum||Replies||Last Post|
|New DLC Available - Magicka: The Other Side of the Coin||News||Archived News Items||0||06-19-12 12:10 PM|
|AGP Fast write and SiS 735 not supported ?||Chojin||NVIDIA Linux||9||10-11-02 06:52 PM|