Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 05-08-03, 12:56 PM   #1
eldwin
Registered User
 
Join Date: May 2003
Posts: 4
Default Trouble Running Redhat 9

Hello all,

I'm a complete newbie and I'm having problems running Redhat 9 on my ASUS A7N266-VM.

I can get Redhat to install OK, but upon reboot I get a error 28: selected item cannot fit into memory.

I've tried to boot via bootdisk, but my system hangs on Finding Module dependancies.

Everything I've read on the web indicates that this is due to the nvidia drivers.

My questions are: What drivers do i need to update? Can I update the drivers without getting into Redhat (since i can't get it to boot.)

I've read solutions about using the rescue option on the cd, but the explainations are vague. I was wondering if someone could post a walkthrough solution.

Thanks,
Eldwin
eldwin is offline   Reply With Quote
Old 05-09-03, 11:10 PM   #2
LordMorgul
Electrical Engineer
 
LordMorgul's Avatar
 
Join Date: Dec 2002
Location: San Luis Obispo, CA
Posts: 872
Default

As for the driver issues, I can't help there. It is possible to upgrade the drivers I am sure, but the process I cannot outline.

For linux rescue:
insert cd 1, boot
at command line type: linux rescue

the system will attempt to find a valid install and then 'mount' it so that you can play with it, just know that it will tell you if it can work with the installed system or not.

the mounted system will be available to work with, but command line only, and if you are unfamiliar with this environment it will be difficult to work with. You need a good book on linux to help with this, or see www.tldp.org

The system will be mounted with the root partition / INSIDE the cd booted system, pay attention to where it report that to be, I do not remember. i.e. your root / now becomes /somthin/somthin/

From this environment, you should be able to upgrade the driver using a floppy or other cd to supply the driver file. This is rather vague I know... good luck.
LordMorgul is offline   Reply With Quote
Old 05-09-03, 11:46 PM   #3
eldwin
Registered User
 
Join Date: May 2003
Posts: 4
Default

Thanks for the reply!

I was able to boot, via the boot disk, after I disconnected everything from my computer except for the monitor/mouse/keyboard.

I haven't installed the updated drivers at this point, but that should be no problem (I hope.)

I'll post my progress.

Eldwin
eldwin is offline   Reply With Quote
Old 05-10-03, 06:57 PM   #4
edbmail
Registered User
 
Join Date: May 2003
Posts: 1
Default Redhat 9 on my ASUS A7N266-VM

The ASUS A7N266-VM motherboard will work OK with Redhat 9 but the default boot loader (grub) does not work. When you install you should select lilo as the boot loader.

Eric
edbmail is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Redhat 8.0 NVIDIA works - INSTRUCTIONS STEEL1 NVIDIA Linux 267 04-15-03 06:48 PM
nForce + RedHat 7.3 Success Story rtz NVIDIA Linux 47 02-15-03 02:20 AM
POSSIBLE AGP TROUBLE (mandrake 9.0) chrono86 NVIDIA Linux 4 10-12-02 12:09 PM
redhat 8 nforce network success cd21 NVIDIA Linux 2 10-07-02 08:48 PM
trouble enabling 3d mukluk123 NVIDIA Linux 3 08-12-02 01:52 PM

All times are GMT -5. The time now is 09:53 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.