Go Back   nV News Forums > Linux Support Forums > General Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 07-28-08, 09:46 AM   #1
Zorro_X
Registered User
 
Zorro_X's Avatar
 
Join Date: Jul 2008
Location: France
Posts: 4
Question Rebuild Kernel with nForce Drivers (Kernel V2.6.18 Debian)

Hello all !

I've just buy an ASUS motherboard (P5N-EM HDMI) with nForce 630i chipset. I'm "one of those that yet likes to rebuild his own kernel"... But I can't manage to get the chipset working neither the network card, i've "solved" that by using another pci network card but there is no way to install a second SATA hard drive (320GB) and when I do a lspci I have all the north bridge listed as unknown...

Any help will be usefull, please...

Thank you in advance,
Z
Zorro_X is offline   Reply With Quote
Old 08-01-08, 05:36 AM   #2
snIP3r23
Registered User
 
Join Date: Aug 2008
Posts: 4
Default Re: Rebuild Kernel with nForce Drivers (Kernel V2.6.18 Debian)

Quote:
Originally Posted by Zorro_X View Post
Hello all !

I've just buy an ASUS motherboard (P5N-EM HDMI) with nForce 630i chipset. I'm "one of those that yet likes to rebuild his own kernel"... But I can't manage to get the chipset working neither the network card, i've "solved" that by using another pci network card but there is no way to install a second SATA hard drive (320GB) and when I do a lspci I have all the north bridge listed as unknown...

Any help will be usefull, please...

Thank you in advance,
Z
hi!

please post the output of lspci -v

i assume you have a nvidia nic, so you have to add the FORCEDETH driver, for the harddrive you need the SATA_NV driver. perhaps you need a newer kernel that supports your chipset.

HTH
snIP3r
snIP3r23 is offline   Reply With Quote
Old 08-09-08, 01:23 PM   #3
Zorro_X
Registered User
 
Zorro_X's Avatar
 
Join Date: Jul 2008
Location: France
Posts: 4
Default Re: Rebuild Kernel with nForce Drivers (Kernel V2.6.18 Debian)

Quote:
Originally Posted by snIP3r23 View Post
hi!

please post the output of lspci -v

i assume you have a nvidia nic, so you have to add the FORCEDETH driver, for the harddrive you need the SATA_NV driver. perhaps you need a newer kernel that supports your chipset.

HTH
snIP3r
Here is the lspci -v output :

00:00.0 Host bridge: nVidia Corporation Unknown device 07c1 (rev a2)
Flags: bus master, 66MHz, fast devsel, latency 0

00:00.1 RAM memory: nVidia Corporation Unknown device 07cb (rev a2)
Flags: bus master, 66MHz, fast devsel, latency 0

00:01.0 RAM memory: nVidia Corporation Unknown device 07cd (rev a1)
Flags: 66MHz, fast devsel

00:01.1 RAM memory: nVidia Corporation Unknown device 07ce (rev a1)
Flags: 66MHz, fast devsel

00:01.2 RAM memory: nVidia Corporation Unknown device 07cf (rev a1)
Flags: 66MHz, fast devsel

00:01.3 RAM memory: nVidia Corporation Unknown device 07d0 (rev a1)
Flags: 66MHz, fast devsel

00:01.4 RAM memory: nVidia Corporation Unknown device 07d1 (rev a1)
Flags: 66MHz, fast devsel

00:01.5 RAM memory: nVidia Corporation Unknown device 07d2 (rev a1)
Flags: 66MHz, fast devsel

00:01.6 RAM memory: nVidia Corporation Unknown device 07d3 (rev a1)
Flags: 66MHz, fast devsel

00:02.0 RAM memory: nVidia Corporation Unknown device 07d6 (rev a1)
Flags: 66MHz, fast devsel

00:03.0 ISA bridge: nVidia Corporation Unknown device 07d7 (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 82ae
Flags: bus master, 66MHz, fast devsel, latency 0

00:03.1 SMBus: nVidia Corporation Unknown device 07d8 (rev a1)
Subsystem: ASUSTeK Computer Inc. Unknown device 82ae
Flags: 66MHz, fast devsel, IRQ 255
I/O ports at ff00 [size=64]
I/O ports at 1c00 [size=64]
I/O ports at 1c80 [size=64]
Capabilities: [44] Power Management version 2

00:03.2 RAM memory: nVidia Corporation Unknown device 07d9 (rev a1)
Flags: 66MHz, fast devsel

00:03.4 RAM memory: nVidia Corporation Unknown device 07c8 (rev a1)
Flags: 66MHz, fast devsel

00:08.0 IDE interface: nVidia Corporation Unknown device 056c (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device 82ae
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at fc00 [size=16]
Capabilities: [44] Power Management version 2

00:0a.0 PCI bridge: nVidia Corporation Unknown device 056d (rev a1) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ef800000-ef8fffff
Prefetchable memory behind bridge: ef700000-ef7fffff
Capabilities: [b8] Subsystem: nVidia Corporation Unknown device cb73

00:0b.0 PCI bridge: nVidia Corporation Unknown device 056e (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: efe00000-efefffff
Prefetchable memory behind bridge: 00000000efd00000-00000000efdfffff
Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel

00:0c.0 PCI bridge: nVidia Corporation Unknown device 056f (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: efc00000-efcfffff
Prefetchable memory behind bridge: 00000000efb00000-00000000efbfffff
Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel

00:0d.0 PCI bridge: nVidia Corporation Unknown device 056f (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: efa00000-efafffff
Prefetchable memory behind bridge: 00000000ef900000-00000000ef9fffff
Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel

00:0e.0 IDE interface: nVidia Corporation Unknown device 07f0 (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device 82ae
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at f700 [size=16]
Memory at efffc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Capabilities: [8c] #12 [0010]
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-

00:10.0 VGA compatible controller: nVidia Corporation Unknown device 07e1 (rev a2) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device 82ae
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at ee000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 40000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Belkin Unknown device 5005
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
I/O ports at be00 [size=256]
Memory at ef8ff000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at ef700000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2


Thank you for your help,
Z
Zorro_X is offline   Reply With Quote
Old 08-09-08, 01:41 PM   #4
snIP3r23
Registered User
 
Join Date: Aug 2008
Posts: 4
Default Re: Rebuild Kernel with nForce Drivers (Kernel V2.6.18 Debian)

hi!

it looks like your kernel is too old. could you try a livecd with a newer kernel and check if the hardware is recognized?

greets
snIP3r
snIP3r23 is offline   Reply With Quote
Old 08-10-08, 12:00 PM   #5
Zorro_X
Registered User
 
Zorro_X's Avatar
 
Join Date: Jul 2008
Location: France
Posts: 4
Default Re: Rebuild Kernel with nForce Drivers (Kernel V2.6.18 Debian)

Quote:
Originally Posted by snIP3r23 View Post
hi!

it looks like your kernel is too old. could you try a livecd with a newer kernel and check if the hardware is recognized?

greets
snIP3r
I've just tried the latest one (V2.6.26) but it is worst : i've a kernel panic because no file system has been found...
(it means that it has not even recognized the SATA controller)

Last edited by Zorro_X; 08-11-08 at 02:28 PM.
Zorro_X is offline   Reply With Quote
Old 08-23-08, 09:08 AM   #6
Zorro_X
Registered User
 
Zorro_X's Avatar
 
Join Date: Jul 2008
Location: France
Posts: 4
Default Finaly done !!!

YES ! now it works !
After 100 rebuilds of my kernel i've found the final solution allowing it to find out my NVidia chipset !!
Thankyou anyway for your help !
Z
Zorro_X is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Corrupted display - 302.17 - Dell Precision T3500 (G98 [Quadro NVS 295]) gbailey NVIDIA Linux 1 06-27-12 10:24 AM
UEFI+Nvidia - NVRM: Your system is not currently configured to drive a VGA console... interzoneuk NVIDIA Linux 0 06-26-12 04:51 AM
xorg locks-up with newest nvidia drivers w/ vdpau. theroot NVIDIA Linux 1 06-24-12 11:04 AM
Installing nForce drivers on Debian 3.0 Doink NVIDIA Linux 4 09-14-02 08:34 PM
Crash when logout from X TGL NVIDIA Linux 10 09-13-02 08:22 PM

All times are GMT -5. The time now is 08:01 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.