Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 05-17-03, 05:07 PM   #1
rogerli
Registered User
 
Join Date: May 2003
Posts: 9
Default How can I active TV out with 4363 driver

I tried very hard to configure two x screens: one for Monitor and one for TV. Here is my XF86Config-4:

# File generated by anaconda.

Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0"
Screen 1 "Screen1" leftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:7100"

EndSection

Section "Module"
# Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
# Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Option "XkbVariant" "basic"
#Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-95
VertRefresh 50-160
Option "dpms"

EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "TV Vendor"
ModelName "TV Model"
HorizSync 30-50
VertRefresh 60
EndSection

Section "Device"

Identifier "nvidia0"
# Driver "vesa"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 2 (generic)"
Screen 0
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "nvidia1"
# Driver "vesa"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 2 (generic)"
Screen 1
Option "TVStandard" "NTSC-M"
Option "ConnectedMonitor" "TV"
Option "TVOutFormat" "SVIDEO"
BusID "PCI:1:0:0:
EndSection
Section "Screen"
Identifier "Screen0"
Device "nvidia0"
Monitor "Monitor0"
DefaultDepth 16

Subsection "Display"
Depth 16
Modes "1280x1024"
EndSubsection
EndSection
Section "Screen"
Identifier "Screen1"
Device "nvidia1"
Monitor "Monitor1"
DefaultDepth 16

Subsection "Display"
Depth 16
Modes "640x480"
EndSubsection
EndSection

Section "DRI"
Mode 0666
EndSection

How should I make it working?

Thanks!
rogerli is offline   Reply With Quote
Old 05-17-03, 10:08 PM   #2
bobby5832708
Registered User
 
Join Date: May 2003
Location: Winter Springs FL
Posts: 4
Default

Here's my XF86Config file. I use RedHat9 and a GeForce 4 MX440 and both the monitor and TV show the same image. Hope this helps.




[root@dvd /]# more /etc/X11/XF86Config
# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"

# Option "dpms"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "AT&T 15 in. Color"
HorizSync 30.0 - 64.0
VertRefresh 50.0 - 90.0
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "PNY Technologies"
BoardName "NVIDIA GeForce 4 MX (generic)"
VideoRam 65536
Option "TwinView" "on"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "800x600, 800x600; 640x480, 640x480;"
Option "TVStandard" "NTSC-M"
Option "ConnectedMonitor" "CRT, TV"
Option "TVOutFormat" "SVIDEO"
Option "TVOverscan" "0.8"
Option "TwinViewOrientation" "clone"
Option "RenderAccel" "1"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection
bobby5832708 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Best Linux driver for Quadro FX2700M dclement NVIDIA Linux 0 05-07-12 06:58 AM
Redhat 8.0 NVIDIA works - INSTRUCTIONS STEEL1 NVIDIA Linux 267 04-15-03 06:48 PM
Getting the proprietary nvidia driver to run with Debian 3.0 r0 (woody) Katchina404 NVIDIA Linux 9 01-12-03 08:49 AM
failing to initialize NV driver PsyShook NVIDIA Linux 10 09-19-02 12:41 PM
Nvidia Driver causes crash on Standby/Suspend dasher NVIDIA Linux 5 09-16-02 05:57 PM

All times are GMT -5. The time now is 02:12 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.