Go Back   nV News Forums > Hardware Forums > General Hardware

Newegg Daily Deals

Reply
 
Thread Tools
Old 11-10-08, 06:26 PM   #1
einstein_314
w00t!!
 
einstein_314's Avatar
 
Join Date: Dec 2003
Location: Victoria, BC
Posts: 2,905
Lightbulb Logitech MX Revolution Sticky Wheel Fix

Hey guys, just thought I'd provide a solution to the revolution's sticky wheel problem that I just came up with.

So the problem is that after a few months of use, the "revolutionary free spinning wheel" becomes "all gummed up" and doesn't free wheel anymore. It's more like a regular wheel. At first I figured it was the bearing getting all gummed up or something. Then I read on the Logitech support forums that the common problem is that the piece of rubber around the wheel stretches over time and becomes a bit sloppy of a fit. There is a tight tolerance on the clearance between the wheel and the bottom of the housing inside, so this loose rubber band rubs on it. And thus makes it not free wheel.

My options were
a) file and RMA with logitech and wait weeks for a new one to arrive
b) get a new mouse
c) try and fix it myself

I opted to go for c because if I screwed it up, I can always still go buy a different one. And I don't want to wait for a month for a RMA to go through.

So! Here's what I did.

Tools and supplies:
1 pair of scissors and crazy glue

Procedure:
1) While pinching together from both ends of the wheel (this will make the rubber bit bunch up and allow you to get the scissors underneath it) cut the band with the scissors.
2) Crazy glue one end of the rubber to the wheel
3) While pulling on the other end to stretch it a bit, trim off enough to make the ends meet properly.
4) Crazy glue the other end in place.

Voila! A working free wheeling revolution mouse again. Took me all of 5 minutes to do (including finding my crazy glue and then a needle to de-gunk the nozzle).

Hope this saves someone the hassle of going through an RMA!
__________________
Intel Core 2 Quad Q6600 @ 3.2GHz (9 x 355) w/ Swiftec APOGEE GTX Waterblock|| Asus P5B-Deluxe WiFi Edition
eVGA 8800 GTX Superclocked Edition @ 675/1150 w/ DangerDen 8800GTX Waterblock|| 4x1GB Mushkin XP2 PC2-8500
X-Fi Fatal1ty 64MB || PC Power & Cooling Silencer 750W || Seagate 7200.10 320 GB || Dell 2407WFP
Logitech Z-5300 Speakers || Sennheiser HD555's || Logitech G7 || Logitech G15 || Windows Vista Ultimate x64
einstein_314 is offline   Reply With Quote
Old 01-10-09, 02:20 AM   #2
colfmedion
Registered User
 
Join Date: Jan 2009
Posts: 1
Default Re: Logitech MX Revolution Sticky Wheel Fix

Followed the advice and Mouse now back to normal and working perfectly. Didn't realise it was so bad until I fixed it.
Many Thanks
colfmedion is offline   Reply With Quote
Old 01-10-09, 03:18 AM   #3
crainger
 
crainger's Avatar
 
Join Date: Aug 2004
Location: Coffs Harbour, NSW, Australia
Posts: 29,559
Send a message via AIM to crainger
Default Re: Logitech MX Revolution Sticky Wheel Fix

I would have gone with b. Any excuse to get a new mouse and/or keyboard for me. ::
crainger is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:29 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.