Geforge 8600M PCI ID: 10de:0407 not supported?

[nudel]

So since i use FC10 there is no way to get my nvidia Card working, I tried driver versions 180.xx. Any Ideas? Thanks

Card is a Geforge 8600M GT , Notebook: Acer Aspire 5920

uname -a
Linux popel.subraum.mine.nu 2.6.27.12-170.2.5.fc10.i686 #1 SMP Wed Jan 21 02:09:37 EST 2009 i686 i686 i386 GNU/Linux

/sbin/lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GT (rev a1)
04:00.0 Memory controller: Intel Corporation Turbo Memory Controller (rev 01)
06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
0a:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0a:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0a:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
0a:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
0a:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)

dmesg means:

nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: enabling device (0000 -> 0003)
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: The NVIDIA GPU 01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 180.25 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: www.nvidia.com.
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64

[nudel]

hmmm ok, i removed and reinstalled the kernel also i did it with 180.25-1.fc10... now it works i think... but 180.27 still has problems with my card

[nudel]

ok I cheered too soon. after 3-4 fine working boots, its the same like before. Card not supportet also with 180.25.