Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 05-26-03, 04:06 AM   #1
mykelalvis
Registered User
 
Join Date: May 2003
Location: Birmingham, AL
Posts: 5
Send a message via ICQ to mykelalvis Send a message via AIM to mykelalvis Send a message via Yahoo to mykelalvis
Unhappy TwinView Issues on GF4 MX 400

Hi!

I have a TwinView issue on the following config:

RedHat 9 install updated to kernel 2.4.20-13.9 via RHN
Running on an AthlonXP 2400+ on a Shuttle X SN41G2 with integrated GeForce 4 MX . The thing DOES have a TV-OUT connector.

www.shuttle.com
http://us.shuttle.com/specs2.asp?pro_id=163


According to Shuttle: my bios id is FN41S00Y per the POST screen.

[root@isis root]# cat /proc/version
Linux version 2.4.20-13.9 (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Mon May 12 11:03:52 EDT 2003
[root@isis root]# cat /proc/driver/nvidia/cards/0
Model: GeForce4 MX Integrated GPU
IRQ: 10
Video BIOS: 04.1f.00.07.00
Card Type: AGP
[root@isis root]# cat /proc/driver/nvidia/version
NVRM version: NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363 Sat Apr 19 17:46:46 PDT 2003
GCC version: gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)

The behavior is:
0. While in text mode at booting, the second monitor clones the first, as expected.

1. When starting X, I get the nVidia splash screen, at which point the Radius monitor (second display) becomes active briefly (as noted by the power light going amber for a second and then becoming green) and then falls back to inactive (as noted by the power light becoming amber).

2. The desktop thinks it's geometry is 1024x768 (as noted by the boundaries of mouse pointer movement)

On an identical box running WinXP Pro and the latest nVidia drivers, multi-display desktops worked just swimmingly ( duplicating the wallpaper, etc)


X Config file attached as .txt document.

Thanks for any help you can provide.
Attached Files
File Type: txt xf86config.txt (3.3 KB, 164 views)

Last edited by mykelalvis; 05-26-03 at 04:18 AM.
mykelalvis is offline   Reply With Quote
Old 05-26-03, 04:10 AM   #2
mykelalvis
Registered User
 
Join Date: May 2003
Location: Birmingham, AL
Posts: 5
Send a message via ICQ to mykelalvis Send a message via AIM to mykelalvis Send a message via Yahoo to mykelalvis
Default Log for above issue

Attached is my X log file. Please let me know if there's something else I need to do/provide.

Thanks,
Mykel
Attached Files
File Type: log xfree86.0.log (35.0 KB, 169 views)
mykelalvis is offline   Reply With Quote
Old 06-02-03, 08:44 PM   #3
belanger
Registered User
 
Join Date: Apr 2003
Posts: 8
Default

I burned a day trying to resolve this exact same problem a month ago and still have no fix. The only difference is that I'm trying to run two displays at 1400x1050 each. I've posted to a couple of different places and no one responds, so either:

1) No one is running RH9+SN41G2+TwinView
2) It's so obvious and I'm such morons that no one is willing to answer.
3) No one likes me. *sniff*

As best as I can tell, the problem has to do with memory throughput. If you check your log, you'll see:

(WW) NVIDIA(0): Insufficient memory bandwidth for MetaMode

I have dozens of those lines appear when I start up. It doesn't matter how low you crank down the displays, it'll still cause that error.

Also, I'm able to get the displays to work, albeit just barely, by adding this to the device option:

Option "NoBandWidthTest"

Cavaet emptor, because this display becomes extremely unstable. Be prepared to use the vulcan death grib to escape if you display goes haywire. Anyway, this disables those tests that you're getting warnings about and your second display will come up. It's just unusable.

Good luck and let me know if you make any break-throughs. I'm licked until a new driver comes out from nVidia.
belanger is offline   Reply With Quote
Old 06-02-03, 10:27 PM   #4
somoney
Registered User
 
Join Date: Jun 2003
Posts: 5
Default RedHat 9.1 no good either.

It appears that NO ONE is compiling the nvidia redhat source with Twinview ENABLED. No matter what you put into the XF86config will not change the fact that TWINVIEW is just not there! Can SOMEONE compile some nforce2 source w/Twinview for us Shuttle XPC (SN41G2) users?

Please!

SoMoney
somoney is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Twinview performance issues on GTS250 hampsterblade NVIDIA Linux 4 05-30-12 11:53 AM
XF86Config for a Quadro4 without TwinView? Twirlip NVIDIA Linux 1 10-09-02 10:36 AM
Twinview with TV-out karlaugust NVIDIA Linux 10 08-28-02 04:20 PM
GeForce4 image quality - need some HONEST opinions ErrorS NVIDIA GeForce 7, 8, And 9 Series 24 08-22-02 06:39 AM
How do I configure TwinView on Dell Inspiron rutgerclaes NVIDIA Linux 6 08-01-02 03:20 AM

All times are GMT -5. The time now is 01:56 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.