p5b-d Pencil mod questions

**XDanger** · 02-09-09, 10:36 AM

Running q6700 @ 3.6 but with lots of vdroop so thinking of doing pencil mod.

2b pencil is better as is less loose than a higher b pencil and wont blow off so quickly?

Can I put some silicone gaulk on there to keep the graphite fresh or will it migrate into the silicone?

edit: k so it doesnt "fall off" but the charge degrades the structure of the graphite, I see.

**XDanger** · 02-11-09, 12:56 PM

Ive tried a couple of time but with fail, I keep getting zero vdroop which is bad

The cpu load temp is 8 degree's lower though ,Even with warmer ambient temp.

Could be because the case is on its side but still good.

K heres another question,

Just HOW dangerous is no vdroop?

bail_w · 02-12-09, 02:02 AM

I don't get it. At first, you said there was vdroop and now zero vdroop? Why do you think zero vdroop is bad?

**XDanger** · 02-12-09, 08:08 AM

AFAIK a little vdroop helps protect against cpu explode.
__________________
After about 10 redo's my ripple has gone from 0.06 to 0.02 ,Which is good I think.

02-09-09, 10:36 AM	#1
XDanger Whaaat? Join Date: Nov 2005 Posts: 5,673	p5b-d Pencil mod questions Running q6700 @ 3.6 but with lots of vdroop so thinking of doing pencil mod. 2b pencil is better as is less loose than a higher b pencil and wont blow off so quickly? Can I put some silicone gaulk on there to keep the graphite fresh or will it migrate into the silicone? edit: k so it doesnt "fall off" but the charge degrades the structure of the graphite, I see. __________________ 2500K 4.4ghz,P8P67Pro,120gb Force3, 12gb Vengeance,HD6950,TX850v2,W7HP,LaCie Blue 22" crt COMMODORE 64 Silver Label 1Mhz/128D 4Mhz(Z80) Last edited by XDanger; 02-10-09 at 12:36 PM.

02-11-09, 12:56 PM	#2
XDanger Whaaat? Join Date: Nov 2005 Posts: 5,673	Re: p5b-d Pencil mod questions Ive tried a couple of time but with fail, I keep getting zero vdroop which is bad The cpu load temp is 8 degree's lower though ,Even with warmer ambient temp. Could be because the case is on its side but still good. K heres another question, Just HOW dangerous is no vdroop? __________________ 2500K 4.4ghz,P8P67Pro,120gb Force3, 12gb Vengeance,HD6950,TX850v2,W7HP,LaCie Blue 22" crt COMMODORE 64 Silver Label 1Mhz/128D 4Mhz(Z80)

02-12-09, 02:02 AM	#3
bail_w Registered User Join Date: Nov 2005 Posts: 130	Re: p5b-d Pencil mod questions I don't get it. At first, you said there was vdroop and now zero vdroop? Why do you think zero vdroop is bad? __________________ Intel Quad Core Q6600 "G0" @ 3.9 with 1.49v\| Gigabyte UD39 \| 2 x 1 gb G skill DDR2 Hz \| 2 x 320GB Segate SATAII 16MB Cache Raid 0 \| 8800GTX 768MB \|Antec 850W PSU WC Setup: D-Tek Fuzion \| Swiftech MCP 655 \|Thermochill PA120.2 \|Swiftech MCW60 __________________ Heatware: bail_w http://heatware.com/eval.php?id=43723

02-12-09, 08:08 AM	#4
XDanger Whaaat? Join Date: Nov 2005 Posts: 5,673	Re: p5b-d Pencil mod questions AFAIK a little vdroop helps protect against cpu explode. __________________ After about 10 redo's my ripple has gone from 0.06 to 0.02 ,Which is good I think. __________________ 2500K 4.4ghz,P8P67Pro,120gb Force3, 12gb Vengeance,HD6950,TX850v2,W7HP,LaCie Blue 22" crt COMMODORE 64 Silver Label 1Mhz/128D 4Mhz(Z80)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DayZ mod for ARMA II	ATOJAR	Gaming Central	42	02-21-13 05:51 AM