Go Back   nV News Forums > Linux Support Forums > General Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 04-24-03, 03:34 AM   #1
SoulKissUK
Registered User
 
Join Date: Apr 2003
Posts: 2
Angry nForce2 - which /dev's should I be using

Hi There.

Just opgraded to the new nforce drivers.

Before the upgrade I was using the standard i810 stuff - worked fine just out of the box - well after I changed the permissions on stuff like /dev/dsp and set up the module aliases.

The nvnet stuff also worked.

I upgraded so that I could get SPDIF support and indeed I have it - 6 channels too!!!

Nvidia + AC97 Audio, version 0.24, 00:28:58 Apr 24 2003
Nvaudio: in Funcction Nvaudio_init_module
PCI: Setting latency timer of device 00:06.0 to 64
Nvaudio: NVIDIA nForce2 Audio found at IO 0xb400 and 0xb000, IRQ 11
Nvaudio: Audio Controller supports 6 channels.
NVaudio: Defaulting to base 2 channel mode.
ac97_codec: AC97 Audio codec, id: ALG32(ALC650)
Nvaudio: only 48Khz playback available.
Nvaudio: AC'97 codec 0, new EID value = 0x05c7
Nvaudio: AC'97 codec 0, DAC map configured, total channels = 6
Nvaudio: PROBE is done

Now the module is loaded

onix:~# lsmod
Module Size Used by Tainted: P
ide-scsi 7664 0
parport_pc 14148 1 (autoclean)
lp 6592 0 (autoclean)
parport 24992 1 (autoclean) [parport_pc lp]
nvidia 1542144 10
ohci1394 15656 0 (unused)
ieee1394 29964 0 [ohci1394]
nvaudio 25464 0 (unused)
ac97_codec 10216 0 [nvaudio]
nvnet 25696 1

So everything looks good, until I start up GDM and Gnome 2.2

Then when the volume control widget tries to start I get an error

"Couldn't open mixer device /dev/sound/mixer"

now from memory my old set up only used /dev/mixer.

Are there some devices that I need to create to fix this?

One thought does come to mind is that I did partially configure ALSA under the old drivers as when I was running in "vanilla" i810 mode (although patched) I had heard that their drivers woudl work on my hardware and it seemed everyone was using them.

I did de-install them (make uninstall) and purge the packages (I am using Debian) but I wonder if bits, such as where the system should look for sound hardware is, are still hanging around - if this is the case, does anyone know where to look to correct this.

Thanks for any help anyone can throw on this issue.

David

System
MSI K7N2G
Debian Linux - 2.4.20 self compiled kernel
AMD XP 2000+
378 mb ram - 128mb for gff, 256mb for system
SoulKissUK is offline   Reply With Quote
Old 06-09-03, 03:15 AM   #2
jhurliman
Registered User
 
Join Date: Jun 2003
Location: Spokane, WA
Posts: 1
Send a message via AIM to jhurliman
Default

You could try looking for any mixer devices that you do have, and symlinking to it.

find /dev/ -name *mixer*
ln -s /dev/currentmixer /dev/sound/mixer

What motherboard are you using? I've been fighting tooth and nail to get 5.1 audio out of the A7N266-VM. ALSA 0.94, nvaudio.o, both work fine in analog but no IEC958 mixer control in alsamixer, and I haven't figured out how to get AC3 playback with an OSS module like nvaudio.o. Any hints on how to do this with mplayer? My next step is to check out the ALSA CVS and see if any progress has been made on nForce2 SPDIF.
jhurliman is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looks like I'm buying a nForce2 board ATI LoVeR 9700 CPUs, Motherboards And Memory 15 10-20-02 02:08 PM
nforce2 w/ 1900+ thegamedisturb CPUs, Motherboards And Memory 4 10-05-02 07:09 PM
nforce2 question. Nutty CPUs, Motherboards And Memory 3 10-05-02 11:52 AM
Where are nforce2 mobos? Fotis Rumor Mill 2 09-03-02 07:16 PM
nForce2 Linux support synonymy NVIDIA Linux 4 08-02-02 11:24 PM

All times are GMT -5. The time now is 07:31 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.