Go Back   nV News Forums > Linux Support Forums > General Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 07-11-03, 07:09 AM   #1
Tommi
Registered User
 
Join Date: Mar 2003
Posts: 72
Talking I really cannot make multisession cd's...please help.

Yo!

I am convinced that the devil is teasing me…so hard times I have had with writing cd’s. I live in an it hell right now. I have asked help earlier, but it looks like even Schilling cannot help me…yes, I even wrote him couple of times and he replied to me sometimes. But suddenly he gave up with me, maybe he felt that I was arrogant towards him…but this in not true. Maybe he simply couldn’t help me. Everything is possible. Maybe he didn’t have time – he gets hundreds of emails. He was suspecting some Redhat problem in his last letter…that whether it is possible that my OS does not support multisession. But we all know that Redhat does.

I making something seriously wrong with Linux. It seems that there is very little left to do now.
It can be:

1. Some problem while installing
2. Some wrong BIOS setting
3. Some problem with my kernel – should it be recompiled… or what..I don’t know.
4. Code 18
5. USER,n
6. And finally…I don’t want to be arrogant, only newbie… I am sorry… I do respect Schilling’s work… I do respect the free open source community…this is free stuff, I should’t complain too much…but perhaps…maybe…I really don’t know…there is a bug in Redhat Linux 9.0. But I really do not have a proposal how fix it. J

Soon I will give up with Linux. Maybe I am too stupid to use it. Next week, on Friday, I will give up, and then its over with Linux. It was not my system. J I don’t want to be negative, but I have been struggling with this issue for weeks, without any results.

So…what’s up, then?

I had a Hewlett Packard 9100i cd-writer and I still have it. It’s yours, if you can help me with my writer, I will mail it to you wherever you live, except to Moon or Mars. But, yes, if I just had the money I could send my HP to Mars also if you want!!! Just a secretary’s phone call to NASA and that’s it. There was nothing wrong with my HP, I should have guessed this because it’s on the Redhat support list. But I became desparate and bought a new Plextor Plexwriter, but it has the same problem, which is:

MULTISESSION DOES NOT WORK WHILE BURNING CD’S.

Bying a new writer was total waste of money. J

Yes, very strange. If I burn a cd, it does the first files, but if I want to continue the disk, it can not make it. It tries to burn, but nothing happens. The frontend says, that file is burning, but there are no files after that – except the first files. I have also tested command promts, like:

mkisofs -L -l -J -R -A Disc-ID -P Publisher-ID -p Preparer-ID -V Volume-ID –o send_it_to_mars.iso /home/tommi/ | cdrecord -v -pad -data -multi fs=8m speed=8 dev=0,0,0 driveropts=burnproof send_it_to_mars.iso

It gives a result like this, which seems to be quite similar with both writers:

Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
TOC Type: 1 = CD-ROM
cdrecord: Operation not permitted. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
Warning: creating filesystem that does not conform to ISO-9660.
Total translation table size: 0
Total rockridge attributes bytes: 358
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 7024
464 extents written (0 Mb)
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling').
Driveropts: 'burnproof'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 9100 '
Revision : '1.0c'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 4183808 = 4085 KB
FIFO size : 8388608 = 8192 KB
Track 01: data 0 MB padsize: 30 KB
Total size: 1 MB (00:06.41) = 481 sectors
Lout start: 1 MB (00:08/31) = 481 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type C, low Beta category (C-) (6)
ATIP start of lead in: -11567 (97:27/58)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 12
Manufacturer: Mitsui Chemicals, Inc.
Blocks total: 359849 Blocks current: 305367 Blocks remaining: 304886
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
Starting to write CD/DVD at speed 8 in real TAO mode for multi session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 54482
Track 07: 0 of 0 MB written.
Track 07: writing 30 KB of pad data.
Track 07: Total bytes read/written: 950272/980992 (479 sectors).
Writing time: 4.849s
Average write speed 2.3x.
Fixating...
Fixating time: 12.602s
cdrecord: fifo had 15 puts and 15 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
[tommi@localhost tommi]$

Being root makes no difference!


But even Schilling could not find any problem with my flags…but maybe he was in a hurry. After all he is only a human. J

My system:

1. Redhat 9.0 with very latest kernel – no other upgrades, except kernel
2. Pentium 4
3. 1 GT RAM.
4. Intel 845 E chipset, MSI motherboard, very latest BIOS in it.
5. Tested writer’s
- Hewlett Packard 9100i
- Plextor Plexwriter, brand new, I don’t remember the model right now, you will get it if it is really important.

Otherwise my system works quite decently. I think there are no other serious problems with my installation. Maybe stability not quite as good as it should be, but it does the job.

Please help me…please…I am begging form God to send the right advicer.



-Tommi
Tommi is offline   Reply With Quote
Old 07-11-03, 03:22 PM   #2
Tommi
Registered User
 
Join Date: Mar 2003
Posts: 72
Default

Sorry, It was code 18. No bugs in Linux...I wish I was more clever sometimes.

The offer is over, I will give my old drive to our university.

-Tommi
Tommi is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
May 24 Webinar: How Do You Make Grid Engine Faster? News Archived News Items 0 05-22-12 06:30 PM
IS there a way to make games work on the CURRENT RT? Caleb NVIDIA Windows Graphics Drivers 1 09-03-02 11:11 AM

All times are GMT -5. The time now is 04:27 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.