|08-27-10, 08:30 PM||#1|
Join Date: Jun 2009
Inner Geek: Electro Jeep
One of my favorite things in life is tearing things apart and putting them back together to see how they work. Over the past couple of years, I have taken that to a whole new level ' by converting two automobiles from gas to electric.
It got started about 5 years ago when I acquired an ugly purple 1975 Porsche 914 ' specifically because I wanted to do a conversion:
True to form, I tore it apart and put it back together (without the original engine) ' I had to get at various rust-damaged areas of the body to repair them. Not to mention, silver is a much nicer color than purple:
Using a kit ' specifically designed for the Porsche 914 ' I then put in the electrical components ' electric motor, controller, batteries, etc.:
There are many more details on my blog at http://volt914.com ' including a video that describes everything.
As fun as converting the Porsche was ' it was just a warm-up for the main act. I converted a 1986 Jeep Cherokee to electric. Unlike the Porsche, I did not have the benefit of a kit ' everything had to be done from scratch. Here is the donor vehicle ' our family car in the '80s and '90s (you can also see it in the background of the silver Porsche picture above):
Without a kit, I needed to design and build every bit of the conversion. This included the high-voltage and low-voltage wiring design:
Battery rack design and construction:
Motor mounts and dashboard customization:
And 1001 other details. So, now I have two fully electric vehicles to drive around ' one for me and one for my wife. And, being a complete geek, I documented this one as well at http://electrojeep.com ' including Google Sketchup CAD drawings of all the mechanical parts. I've probably invested 800 hours or more in the projects, but I've learned quite a lot, and had plenty of fun!
I still tinker with both cars from time-to-time. However, I have my eyes open for the next conversion vehicle. Stay tuned, I'm sure I will blog that one as well!