|
|
#1 | |
|
Join Date: Jul 2002
Location: GREENVILLE,TX
Posts: 3,851
|
I have a i7920 with 6gigs of 7-7-7-21 1.64v of DDR1600 OCZ ,I was thinking of getting a 12 gig set 3 x 4gig and the timeing on them are 8-9-8-24 at 1.64v at DDR1600 ,will I see it any slower or should the extra memory make it any faster.
__________________
Intel i7-3820+Corsair H-100+ASROCK X79-Extreme4+16gigs G.Skill PC1600DDR3+2-ASUS DirectCU II GTX-670 in SLI+Crucial 256g-SSD+2- Samsung 1-TB+2-WesternDigtial 640g+LG-12x Blu-Ray Burner+1100w CoolerMaster+Antec-P280 case+50" Plasma PM6700+Logitech Mouse+Keyboard+Pioneer VSX-1020+Polk Audio Speakers |
|
|
|
|
|
|
#2 | |
|
duKe_+
|
The difference will be pretty much unnoticeable.
__________________
CPU - I7 2600K 4.5 GHZ RAM - 8 GB DDR3 1600mhz GPU - GTX 570 Classified |
|
|
|
|
|
|
#3 |
|
Join Date: Jul 2002
Location: GREENVILLE,TX
Posts: 3,851
|
I know the speed of the memory makes little difference with a i7-920 becuse I ran my memory at 1600mhz and at 1200mhz and in all bench marks the difference was around 250 to 300 points ,but I did not try slower timeings.Memory prices are pretty cheap at the moment,unless you want DDR1600 or higher with 7-7-7-21 timeings.,but you can get some 16gig kits of G.Skill DDR1333 with 7-7-7-21 for around $80.Since I run mine at 1200 it works out just fine ,but it will do 1600 if I raise the timeing to 8-8-8-24.
__________________
Intel i7-3820+Corsair H-100+ASROCK X79-Extreme4+16gigs G.Skill PC1600DDR3+2-ASUS DirectCU II GTX-670 in SLI+Crucial 256g-SSD+2- Samsung 1-TB+2-WesternDigtial 640g+LG-12x Blu-Ray Burner+1100w CoolerMaster+Antec-P280 case+50" Plasma PM6700+Logitech Mouse+Keyboard+Pioneer VSX-1020+Polk Audio Speakers |
|
|
|
![]() |
| Thread Tools | |
|
|