Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 03-26-12, 07:34 PM   #1
layr
Registered User
 
Join Date: Mar 2012
Posts: 2
Default Tearing with Quadro FX 570M

I've been looking for a solution quite a lot of time. Modding xorg.conf and enabling vsync in nvidia settings are of no use. The only thing that removes tearing is vsync option in Compiz settings manager. What does comiz' vsync do that nvidia's doesn't?


Kernel 3.2.0-1-amd64
Debian Wheezy
Quadro FX 570M
Nvidia driver ver: 295.20 (have tried downgrading down to 190.something)

Code:
laur@laur:~$ glxinfo |grep OpenGL
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: Quadro FX 570M/PCIe/SSE2
OpenGL version string: 3.3.0 NVIDIA 295.20
OpenGL shading language version string: 3.30 NVIDIA via Cg compiler
OpenGL extensions:
Code:
laur@laur:~$ lspci -v
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: e5000000-e7ffffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:03.0 Communication controller: Intel Corporation Mobile PM965/GM965 MEI Controller (rev 0c)
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, fast devsel, latency 0, IRQ 255
	Memory at e8000000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:03.2 IDE interface: Intel Corporation Mobile PM965/GM965 PT IDER Controller (rev 0c) (prog-if 85 [Master SecO PriO])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18
	I/O ports at 5000 [size=8]
	I/O ports at 5008 [size=4]
	I/O ports at 5010 [size=8]
	I/O ports at 5018 [size=4]
	I/O ports at 5020 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_generic

00:03.3 Serial controller: Intel Corporation Mobile PM965/GM965 KT Controller (rev 0c) (prog-if 02 [16550])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
	I/O ports at 5030 [size=8]
	Memory at e8001000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, fast devsel, latency 0, IRQ 44
	Memory at e8020000 (32-bit, non-prefetchable) [size=128K]
	Memory at e8040000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at 5040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at 5060 [size=32]
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 0, IRQ 17
	I/O ports at 5080 [size=32]
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 0, IRQ 18
	Memory at e8041000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at e8044000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
	I/O behind bridge: 00007000-00007fff
	Memory behind bridge: e4000000-e40fffff
	Prefetchable memory behind bridge: 00000000bf200000-00000000bf3fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
	I/O behind bridge: 00002000-00003fff
	Memory behind bridge: e0000000-e3ffffff
	Prefetchable memory behind bridge: 00000000bf000000-00000000bf1fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 0, IRQ 20
	I/O ports at 50a0 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 0, IRQ 22
	I/O ports at 50c0 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at 50e0 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 0, IRQ 20
	Memory at e8048000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=07, sec-latency=32
	I/O behind bridge: 00006000-00006fff
	Memory behind bridge: e4100000-e43fffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff
	Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M-E) LPC Interface Controller (rev 03)
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>

00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03) (prog-if 80 [Master])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 21
	I/O ports at 01f0 [size=8]
	I/O ports at 03f4 [size=1]
	I/O ports at 0170 [size=8]
	I/O ports at 0374 [size=1]
	I/O ports at 5100 [size=16]
	I/O ports at 5110 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

01:00.0 VGA compatible controller: nVidia Corporation G84M [Quadro FX 570M] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at e5000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Memory at e6000000 (64-bit, non-prefetchable) [size=32M]
	I/O ports at 4000 [size=128]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: nvidia

02:06.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b9)
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 168, IRQ 16
	Memory at e4100000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
	Memory window 0: c4000000-c7fff000 (prefetchable)
	Memory window 1: cc000000-cffff000
	I/O window 0: 00006c00-00006cff
	I/O window 1: 00006800-000068ff
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus

02:06.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b9)
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 168, IRQ 17
	Memory at e4101000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
	Memory window 0: c0000000-c3fff000 (prefetchable)
	Memory window 1: c8000000-cbfff000
	I/O window 0: 00006400-000064ff
	I/O window 1: 00006000-000060ff
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus

02:06.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 03) (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 64, IRQ 18
	Memory at e4102000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

02:06.3 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 20)
	Subsystem: Hewlett-Packard Company Device 30c5
	Flags: bus master, medium devsel, latency 64, IRQ 19
	Memory at e4103000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci

10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
	Subsystem: Intel Corporation PRO/Wireless 4965 AG or AGN
	Flags: bus master, fast devsel, latency 0, IRQ 45
	Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwl4965
layr is offline   Reply With Quote
Old 03-30-12, 06:49 AM   #2
layr
Registered User
 
Join Date: Mar 2012
Posts: 2
Default Re: Tearing with Quadro FX 570M

Topic drop off from page one - bumping.

(any other information to provide? I really see no point in including errorlog, since... anything isn't broken per se)
layr is offline   Reply With Quote
Old 04-11-12, 11:51 PM   #3
dk75
Registered User
 
Join Date: Jan 2009
Posts: 171
Default Re: Tearing with Quadro FX 570M

What do you want?
You run Compiz to make all display trough it and then complains that you must set VSYNC in it?
Disable Compositing in xorg.conf and then it will not interfere with Xorg anymore.
__________________
  • Linux Debian Sid x86_64/ 3.2.0
  • Lenovo T61p
  • NVIDIA driver 295.33
  • Xorg/XServer 7.6+12/1.11.4
  • GNOME 3.2.2
dk75 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:10 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.