Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 10-09-03, 03:08 AM   #1
JBC
Registered User
 
Join Date: Oct 2003
Posts: 8
Default Red Hat Linux 9 & Geforce 3 t2 driver question

I'm a brand new user of Linux. I just installed Red Hat Linux 9 for my son without a hitch. I installed ALL packages then updated all RPM's with the RHN. I'm using the geforce 3 generic driver. I noticed that the display was a little choppy so I checked out the driver settings and noticed that the 3D hardware acceleration check box was ghosted. I decided that nVidia drivers would do the trick so I went to nVidia's site and found many options, i.e., IA32, IA64, etc. I'm a bit confused as to which drivers I need and for that matter what ALL I'll need to do to enable 3D acceleration.

His system includes:

1) Red Hat Linux 9 (downloaded from www.Redhat.com)
2) All the latest RPM's from the Red Hat Network
3) ASUS AGP-V8200 T2 Deluxe (Geforce 3) video card
4) ASUS A7N8X Deluxe (rev 2.0) Motherboard
5) AMD Athlon XP 1700+ @ 133 FSB
6) 384 Megs of PC-2100 RAM (nForce dual channel mode)
7) Adaptec AHA-2910B SCSI Adapter (for CD-ROMs only)
8) Toshiba SD-M1401 DVD-ROM Drive
9) Yamaha CDR-400t CDR Drive
10) Western Digital WD1200JB HD

I set up his system as a multiboot (BootMagic v8) with includes Windows 98se, Windows XP and Red Hat Linux v9.

While I know that most of this info is not required. Just wanted you to see the full picture.

Thanks in advance,

JBC
JBC is offline   Reply With Quote
Old 10-09-03, 09:19 AM   #2
pdavid
Registered User
 
Join Date: Oct 2003
Posts: 35
Default

you want the ia32 drivers for linux.
it will come as a .run file, which you run with:
sh Name-Of-The-Current-File.RUN

If this is your first time installing the driver, read the README carefully, and follow the directions, and you should be up and running in no time!
__________________
Je ne sais RIEN!
pdavid is offline   Reply With Quote
Old 10-10-03, 05:34 AM   #3
JBC
Registered User
 
Join Date: Oct 2003
Posts: 8
Default

Thanks for pointing out the proper drivers.

Do you know if the nVidia Drivers will allow me to enable 3D hardware support, or is their something else I'm missing?

Thanks,


JBC
JBC is offline   Reply With Quote
Old 10-10-03, 09:43 AM   #4
pdavid
Registered User
 
Join Date: Oct 2003
Posts: 35
Default

when you install the drivers, you will see a splash screen for nvidia before X starts. If you see this splash screen, you are golden. (the little " enable hardware acceleration" in that dialog box you see will still NOT be able to be enabled. This does not mean that the drivers are not work, so don't fret! if the nvidia drivers load, and you see the big splash screen, then rest assured that you are hardware accelerated
__________________
Je ne sais RIEN!
pdavid is offline   Reply With Quote
Old 10-10-03, 03:13 PM   #5
JBC
Registered User
 
Join Date: Oct 2003
Posts: 8
Default

Thanks Much!


JBC
JBC is offline   Reply With Quote
Old 10-11-03, 06:38 PM   #6
VBrew
Registered User
 
Join Date: Oct 2003
Posts: 2
Default Nvidia geForce FX5200 problem

I have downloaded the ia32 from nvidia site but cant get the file to run because it's said " that it could not find "ld" and advise to isntall systemutility. can anyone tell me where I could get that.
know this my linux8.0 does not start in Gnome, only text mode.
I tried to change the XF86Config but it does not work. I can't not use Gnome whatsoever. please help.

MyXF86Config

Identifier "Mouse0"

Driver "mouse"

Option "Protocol" "PS/2"

Option "Device" "/dev/psaux"

Option "ZAxisMapping" "4 5"

Option "Emulate3Buttons" "no"

EndSection


Section "InputDevice"

Identifier "Mouse1"

Driver "mouse"

Option "Device" "/dev/input/mice"

Option "Protocol" "IMPS/2"

Option "Emulate3Buttons" "no"

Option "ZAxisMapping" "4 5"

EndSection


Section "Monitor"

Identifier "Monitor0"

VendorName "Monitor Vendor"

ModelName "Monitor Model"

HorizSync 30-85

VertRefresh 50-160
O
ption "dpms"


EndSection

Section "Device"

# no known options


Identifier "NVIDIA GeForce DDR (generic)"

Driver "nv"

VendorName "NVIDIA GeForce DDR (generic)"

BoardName "NVIDIA GeForce DDR (generic)"



#BusID
EndSection

Section "Screen"


Identifier "Screen0"

Device "NVIDIA GeForce DDR (generic)"

Monitor "Monitor0"

DefaultDepth 16


Subsection "Display"

Depth 16

Modes "1024x768" "800x600" "640x480"

EndSubsection

EndSection


Section "DRI"

Mode 0666

EndSection
VBrew is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Linux driver support for GeForce GT650M vkrevs NVIDIA Linux 1 06-11-12 10:35 PM
302.07 (beta) for Linux x86/x86_64 released AaronP NVIDIA Linux 0 05-02-12 10:55 AM
red hat 7.3 driver problems please help war18 NVIDIA Linux 7 09-16-02 01:25 PM
Red Hat Linux and Dell Inspiron 8200 haridamineni NVIDIA Linux 3 08-27-02 01:37 PM
nVidia drivers + Red Hat Linux 7.3 Error404 NVIDIA Linux 17 08-16-02 12:34 PM

All times are GMT -5. The time now is 07:29 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.