Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 07-29-02, 09:09 AM   #1
mr_dinu
Guest
 
Posts: n/a
Question I can't get the AGP to work

I've installed the NVIDIA linux drivers ... everything seems to work fine but the AGP is disabled (I've took a look on file /proc/driver/nvidia/agp/status and all I can see is "Status: disabled" )
I did specify into XF86Config to enable the AGP option ... but it doesn't work.

I have Slackware 8.1 and a GeForce 2 MX 400 on a motherboard with AGP 4x, VIA chipset.

If you can give me some hints I'll apreciate !

Regards,
Dinu
  Reply With Quote
Old 07-29-02, 09:13 AM   #2
Thunderbird
 
Join Date: Jul 2002
Location: Netherlands, Europe
Posts: 2,105
Default

After you start X for the first time after a reboot, AGP gets initialized. If you didn't launch X yet, it is disabled.

Normally when you don't use the NvAGP option AGP gets enabled. (it defaults to 1 I thought)

First check the first thing I said.
Thunderbird is offline   Reply With Quote
Old 07-29-02, 09:31 AM   #3
mr_dinu
Guest
 
Posts: n/a
Default Re: I can't get the AGP to work

Thank you for your prompt answer, Thunderbird.
My nvidia driver is loaded dinamicly when my X starts. ( I'm using /et/cmodules.conf) and of course I took a look at /proc/driver/nvidia/agp/status after my X started.
I've also manually edited my XF86Config and added "option NvAGP "3" " ... which means (as I know) try using "agpgart" and if it fails use nvidia agp driver.

Do you think I should delete this option from XF86Config ?

/Dinu
  Reply With Quote
Old 07-29-02, 09:34 AM   #4
Thunderbird
 
Join Date: Jul 2002
Location: Netherlands, Europe
Posts: 2,105
Default

The NvAGP option isn't that bad. Check your xfree86 log file or /var/log/messages why it doesn't want to use AGP.
Thunderbird is offline   Reply With Quote
Old 07-30-02, 02:15 AM   #5
mr_dinu
Guest
 
Posts: n/a
Default

I did check the /var/log/messages last night and I couldn't see to much. It tells me that NVIDIA driver was loaded with warnings and then it mentions about "agpgart" version ... and that's it. It doesn't tell me if agpgart was successfully loaded or not. But if I take a look again at /proc/driver/nvidia/agp/status I see the same thing " Status: disabled" .
Also, I've tried last night to use option "NvAGP "1" ... but the result is the same and in /var/log/messages , all I can see is that NVIDIA driver was loaded with warnings.

The BIOS has enabled AGP 4x.

Where could be the problem ?
  Reply With Quote
Old 07-30-02, 12:02 PM   #6
mr_dinu
Guest
 
Posts: n/a
Default

I took a look at : /var/log/XFree86.0.log and I saw this warning:

"(WW) NVIDIA(0): Failed to verify AGP usage"

The other files look like:
/proc/driver/nvidia/agp/status
"Status: Disabled"

/proc/driver/nvidia/agp/card
"
Fast Writes: Not Supported
SBA: Not Supported
AGP Rates: 4x 2x 1x
Registers: 0x1f000007:0x00000000
"

( I don't know why Fast Writes is not supported , my BIOS has this option enabled and the AGP rate is 4x )

/proc/driver/nvidia/agp/host-bridge

"
Host Bridge: Via (unknown)
Fast Writes: Supported
SBA: Supported
AGP Rates: 4x 2x 1x
Registers: 0x1f000217:0x00000000
"

/etc/modules.conf

"
alias char-major-195 NVdriver
options NVdriver NVreg_EnableVia4x=1
options NVdriver NVreg_EnableAGPFW=1
"
and my /etc/X11/XF86Config has

"
option "NvAGP" "3"
"
--------------------------

Any idea what's the problem ?

Dinu
  Reply With Quote
Old 07-30-02, 12:55 PM   #7
Thunderbird
 
Join Date: Jul 2002
Location: Netherlands, Europe
Posts: 2,105
Default

What Via chipset are you using? It seems the drivers don't recognize it yet. Or the chipset is too new or you are using old drivers.

(Don't play with 4x AGP and FW if AGP isn't working at all, it makes it very very unstable. Fast Writes and SBA are disabled because of stability reasons)
Thunderbird is offline   Reply With Quote
Old 07-31-02, 02:32 AM   #8
mr_dinu
Guest
 
Posts: n/a
Default

My chipset is VIA P4X266A .

Yesterday, I had the idea to "insmod agpgart option try_unsupported=1" ... or something like that and after that I started the X server ... and surprise ... the AGP works. (I saw it /var/log/XF86Config.0.log "AGP: Successfully initialased" and again in /proc/driver/nvidia/agp/status "AGP:4x .... ")

So , I don't know what's the conclusion ... my chipset is not supported or is t new and there is no driver for it yet ...

Thank you for helping me !
Dinu
  Reply With Quote

Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gentoo and agp trouble john36 NVIDIA Linux 2 09-12-02 10:36 PM
agp 440bx/zx tntultar32 t00bad NVIDIA Linux 1 09-11-02 02:46 PM
How much heat can a GeForce4 Ti 4600 handle? Velkator NVIDIA GeForce 7, 8, And 9 Series 4 09-03-02 04:41 PM
X freezes when agp 4x is enabled jinksed NVIDIA Linux 1 08-07-02 04:56 PM
Will AGP 8X increase performance over AGP 4X? sancheuz NVIDIA GeForce 7, 8, And 9 Series 10 07-29-02 08:37 PM

All times are GMT -5. The time now is 09:55 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.