Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 12-11-03, 12:47 PM   #1
gunner0446
Registered User
 
Join Date: Dec 2003
Location: Cornwall Ontario Canada
Posts: 3
Default Gforce4 MX440 TV-out

here goes. I've just installed my new nvidia drivers for my Gforce4 MX440 card. I have s-vidio and composite outputs on my card. I'm trying to get my TV-out option to work. I've attached my XF86Config-4 file for you guys to see. what am I missing in order to get TV-out to work.

another little problem is when I exit X, my screen is all garbled with little lines all over the screen. I have to reboot in order to see a normal screen once again. Can any one help me here?

Rgds.
Claude
OOOps, seems like my file attach didn't work, so I'll cut and past here.
# File generated by XFdrake.

# ************************************************** ********************
# Refer to the XF86Config man page for details about the format of
# this file.
# ************************************************** ********************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
#DontZap # disable <Crtl><Alt><BS> (server abort)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "en_US"
Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Komodo"
ModelName "Komodo P571"
HorizSync 30-70
VertRefresh 50-120

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce4 (generic)"
Driver "nvidia"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
EndSection
gunner0446 is offline   Reply With Quote
Old 12-14-03, 04:48 AM   #2
LordMorgul
Electrical Engineer
 
LordMorgul's Avatar
 
Join Date: Dec 2002
Location: San Luis Obispo, CA
Posts: 872
Default

There hasn't been any posted solution to Tv-out problems with the GeF4 mx cards, when the cable is plugged in you will get corruption, blank screens, or freezes. There are several lengthy posts regarding the problem, if you search the forum for the card and those keywords you should turn up a few. You may have to wait until drivers are released that correct the bug.
__________________
"..the triumph of evil is for good men to do nothing." (Edmond Burke)
nVIDIA video driver RPMs for Fedora :: see yum repo at livna.org.
LordMorgul is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
GeForce4 MX440 igel4u NVIDIA Linux 2 09-24-02 04:47 AM

All times are GMT -5. The time now is 01:20 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.