Go Back   nV News Forums > Linux Support Forums > General Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 12-22-03, 08:35 AM   #1
toscana
Registered User
 
Join Date: Dec 2003
Posts: 2
Default Debian A7N8X deluxe make install

Hello,

I have tried to make and make install the nforce driver of NVIDIA in my system. I have a A7NX8 deluxe motherboard.

- Make finishes without any error messages, so that would be OK
- make install has errors:

depmod: cannot read ELF header from /lib/modules/2.4.20/modules.alias
depmod: /lib/modules/2.4.20/modules.ccwmap is not an ELF file
depmod: cannot read ELF header from /lib/modules/2.4.20/modules.symbols
make[1]: *** [install] Error 1
make[1]: Leaving driectory '/home/nforce/nvnet'
make: *** [nvnet_install] Error 2

I am getting exactly the same error with kernel 2.4.23. I also tried 2.6.0 but that doesn't work at all...so I am trying with the 2.4.23 which would do fine...except for this ELF problem.

Anyone has an idea what I should do to get this fixed?

Thank you very much!

TOscana
__________________
-----Toscana-----
toscana is offline   Reply With Quote
Old 12-28-03, 04:43 PM   #2
telepath
Registered User
 
Join Date: Dec 2003
Location: Fairbanks, Alaska todays_temp_18_below
Posts: 1
Send a message via Yahoo to telepath
Default

Here is the output of make and make install. Compare this with your output and post it as well so we may solve this issue. Also try to do the install from the stock kernel that came with your distro. This may lead you to the problem you are encountring.

--- make and make install output---

pit-viper:/home/tarball/nforce/nvnet# make
cc -c -Wall -DLINUX -DMODULE -DEXPORT_SYMTAB -D__KERNEL__ -O -Wstrict-prototypes
-DCONFIG_PM -fno-strict-aliasing -mpreferred-stack-boundary=2 -march=i686 -mal
ign-functions=4 -DMODULE -I/lib/modules/2.4.22/build/include -DMODVERSIONS -in
clude /lib/modules/2.4.22/build/include/linux/modversions.h nvnet.c
ld -r -o temp.o nvnet.o nvnetlib.o
objcopy --strip-symbol="gcc2_compiled." temp.o
cp temp.o nvnet.o
rm temp.o
pit-viper:/home/tarball/nforce/nvnet# make install
mkdir -p //lib/modules/2.4.22/kernel/drivers/net
install -b -m 644 nvnet.o //lib/modules/2.4.22/kernel/drivers/net
pit-viper:/home/tarball/nforce/nvnet#

--end of output---
My configuration:
ASUS A7N8X Deluxe
AMD Athlon XP 2100
512 Meg MEM
Debian Woody 3.0 Release 2
Kernel 2.4.22 ( Nothing out of the ordinary Configuration)

--dmesg output---

Linux version 2.4.22 (root@pit-viper) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sat Dec 27 08:59:26 AKST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=342 hdc=ide-scsi root=/dev/hdb2
ide_setup: hdc=ide-scsi
Found and enabled local APIC!
Initializing CPU#0
Detected 1737.284 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3460.30 BogoMIPS
Memory: 515960k/524224k available (1302k kernel code, 7876k reserved, 372k data, 276k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2100+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1737.3004 MHz.
..... host bus clock speed is 267.2771 MHz.
cpu: 0, clocks: 2672771, slice: 1336385
CPU0<T0:2672768,T1:1336368,D:15,S:1336385,C:267277 1>
PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [10de/01e0] at 00:00.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
vesafb: framebuffer at 0xd8000000, mapped to 0xe080d000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f090
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS02 at 0x03e8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: nVidia Corporation nForce2 IDE (rev a2) UDMA100 controller on pci00:09.0
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
hdb: C/H/S=19161/16/255 from BIOS ignored
hda: Maxtor 6E030L0, ATA DISK drive
hdb: MAXTOR 6L040J2, ATA DISK drive
blk: queue c03196c0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0319808, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST RW/DVD GCC-4520B, ATAPI CD/DVD-ROM drive
hdd: Maxtor 31024H2, ATA DISK drive
blk: queue c0319c74, I/O limit 4095Mb (mask 0xffffffff)
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
spurious 8259A interrupt: IRQ7.
hda: host protected area => 1
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=3738/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=77557/16/63, UDMA(100)
hdd: attached ide-disk driver.
hdd: host protected area => 1
hdd: 20010816 sectors (10246 MB) w/512KiB Cache, CHS=19852/16/63, UDMA(100)
Partition check:
hda: hda1 hda2 < hda5 >
hdb: hdb1 hdb2 hdb3 hdb4
hdd: [PTBL] [1245/255/63] hdd1
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 276k freed
Adding Swap: 499960k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,66), internal journal
Real Time Clock Driver v1.10e
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
02:01.0: 3Com PCI 3c905C Tornado 2 at 0xd000. Vers LK1.1.18-ac
00:26:54:10:50:03, IRQ 11
product code ffff rev 00.0 date 15-31-127
Internal config register is 3600000, transceivers 0x40.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/MII interface.
02:01.0: Media override to transceiver type 12 (<NULL>).
Enabling bus-master transmits and whole-frame receives.
02:01.0: scatter/gather enabled. h/w checksums enabled
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe0ba8000, IRQ 11
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe0baa000, IRQ 11
usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
ohci1394: $Rev: 1010 $ Ben Collins <bcollins@debian.org>
PCI: Setting latency timer of device 00:0d.0 to 64
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e4082000-e40827ff] Max Packet=[2048]
ohci1394_0: SelfID received outside of bus reset sequence
raw1394: /dev/raw1394 device initialized
hub.c: new USB device 00:02.1-1, assigned address 2
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb2:2.0
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000028592c]
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: RW/DVD GCC-4520B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
mice: PS/2 mouse device common for all mice
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,68), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: Media override to transceiver 12 (<NULL>).
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
PCI: Setting latency timer of device 00:06.0 to 64
intel8x0: clocking to 47475
PCI: Setting latency timer of device 00:06.0 to 64
intel8x0: clocking to 47476
telepath is offline   Reply With Quote
Old 01-05-04, 08:57 AM   #3
dnoyeB
Registered User
 
Join Date: Apr 2003
Location: Detroit, Michigan, The United States of America
Posts: 49
Default

which version of the driver are you trying to install and in what format?
__________________
...And now abideth faith, hope, charity, these three; but the greatest of these is charity.
dnoyeB is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mageia 2 Cannot Install 71.86.15 for Riva TNT/TNT2 kbulgrien NVIDIA Linux 3 06-29-12 08:27 AM
Getting the proprietary nvidia driver to run with Debian 3.0 r0 (woody) Katchina404 NVIDIA Linux 9 01-12-03 08:49 AM
Red Hat null(limbo beta 3), guide to install Nvidia Drivers utiel NVIDIA Linux 21 09-30-02 05:32 PM

All times are GMT -5. The time now is 07:48 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.