Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 09-28-02, 03:54 PM   #1
rebol
Guest
 
Posts: n/a
Angry Unable to load 3d driver

Hi to all,

i'm trying to install the nvidia 3d accellerated driver fro my ASUS V6800 with GeForce 256 DDR chipset. I can compile and install the driver normally, from .rpm, .srpm and .tar.gz, the problem appears when i try to run "startx" with the new driver. The X server is well configured. The error message ends with error number 104, and in /var/log/messages these entries appear:

Sep 27 00:03:06 server kernel: nvidia: Can't find an IRQ for your NVIDIA card!
Sep 27 00:03:06 server kernel: nvidia: Please check your BIOS settings.
Sep 27 00:03:06 server kernel: nvidia: [Plug & Play OS ] should be set to NO
Sep 27 00:03:06 server kernel: nvidia: [Assign IRQ to VGA] should be set to YES
Sep 27 00:03:06 server kernel: nvidia: loading NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue Aug 27 15:56:48 PDT 2002
Sep 27 00:03:06 server kernel: NV0: isr request failed 0xfffffff0

The problem is that the system cannot find a free irq for the card. This started when i configured the ide interface on an old ISA AWE32 soundcard. Before that i was able to run 3d accellerated drivers without any problem.

My /proc/interrupts is the following:

CPU0
0: 153946 XT-PIC timer
1: 2353 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 3115 XT-PIC soundblaster
8: 2 XT-PIC rtc
9: 2927 XT-PIC eth0
10: 176 XT-PIC ide3
11: 0 XT-PIC eth1
12: 44964 XT-PIC PS/2 Mouse
14: 35893 XT-PIC ide0
15: 31626 XT-PIC ide1
NMI: 0
ERR: 0

My questions are the following. Which interrupt is required for my AGP video card? Considering that under windows (on the same system, 'cause this is a dual boot system) everything works fine, is there any possibility to run all the stuffs correctly under linux?

Tnx everybody
  Reply With Quote
Old 09-28-02, 06:43 PM   #2
bwkaz
Registered User
 
Join Date: Sep 2002
Posts: 2,262
Default

Have you (as the error message says) tried turning on "assign IRQ to VGA" in your BIOS setup?
__________________
Registered Linux User #219692
bwkaz is offline   Reply With Quote
Old 09-29-02, 04:34 AM   #3
rebol
Guest
 
Posts: n/a
Default

This option is not available on my bios (mb asus p5-ab). I looked for it a lot, but as far as i can see there isn't such a thing. Maybe it's named differently...
  Reply With Quote
Old 09-29-02, 04:58 PM   #4
mtrr
Registered User
 
Join Date: Jul 2002
Location: Germany
Posts: 234
Send a message via ICQ to mtrr
Default

update the bios to at least 1007. follow the instructions that asus gives out.

look there:

ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a-b/

the latest version is I think 1007.a

hth
mtrr is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unable to modify brightness with driver 295.59 and xorg 1.11.4 lorenrookie NVIDIA Linux 0 06-22-12 08:03 AM
Lucid rt kernel can't load latest nvidia driver module, but generic does. marcod NVIDIA Linux 0 05-02-12 06:23 AM
Getting the proprietary nvidia driver to run with Debian 3.0 r0 (woody) Katchina404 NVIDIA Linux 9 01-12-03 08:49 AM
X Failed to load NVdriver c00lr4c3r NVIDIA Linux 13 10-22-02 01:44 PM
Cannot load nvaudio driver (NVidia nforce) thahn01 NVIDIA Linux 4 09-13-02 01:28 AM

All times are GMT -5. The time now is 10:02 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.