Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 01-30-04, 09:07 PM   #1
ParveenKaler
Registered User
 
Join Date: Jan 2004
Location: Vancouver
Posts: 4
Send a message via ICQ to ParveenKaler
Default X lockup. NV35. 5536 drivers.

The X server is locking up on me with the 5536 drivers.

Here are my specs:
Soltek SL-75FRN2
GeforceFX Ultra 5900

Here's a whole bunch of info.

$cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2400+
stepping : 1
cpu MHz : 2004.322
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3964.92

$ cat /proc/version
Linux version 2.4.22-gentoo-r1 (root@bob) (gcc version 3.3.2 20031022 (Gentoo Linux 3.3.2-r3, propolice)) #1 Sat Dec 6 17:22:59 PST 2003

$ cat /proc/driver/nvidia/version
NVRM version: NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
GCC version: gcc version 3.3.2 20031201 (Gentoo Linux 3.3.2-r4, propolice)
Attached Files
File Type: log xfree86.0.log (32.3 KB, 126 views)
ParveenKaler is offline   Reply With Quote
Old 01-30-04, 09:11 PM   #2
ParveenKaler
Registered User
 
Join Date: Jan 2004
Location: Vancouver
Posts: 4
Send a message via ICQ to ParveenKaler
Default

Here's my config file.
Quote:
# ************************************************** ********************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# ************************************************** ********************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
# Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"

EndSection

# ************************************************** ********************
# Files section. This allows default font and rgb paths to be set
# ************************************************** ********************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# FontPath "/usr/X11R6/lib/X11/fonts/truetype/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# ************************************************** ********************
# Server flags section.
# ************************************************** ********************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# ************************************************** ********************
# Input devices
# ************************************************** ********************

# ************************************************** ********************
# Core keyboard's InputDevice section
# ************************************************** ********************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

Option "XkbRules" "xfree86"
Option "XkbModel" "microsoft"
Option "XkbLayout" "us"

EndSection


# ************************************************** ********************
# Core Pointer's InputDevice section
# ************************************************** ********************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"

# Mouse-speed setting for PS/2 mouse.

Option "Resolution" "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

# ************************************************** ********************
# Monitor section
# ************************************************** ********************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Sony Trinitron"

# HorizSync is in kHz unless units are specified.
HorizSync 31.5 - 48.5

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
VertRefresh 50-90

EndSection


# ************************************************** ********************
# Graphics device section
# ************************************************** ********************

# Device configured by xf86config:

Section "Device"
Identifier "NV35"
Driver "nvidia"
VideoRam 262144
# Insert Clocks lines here if appropriate

Option "TwinView"
Option "SecondMonitorHorizSync" " 31.5 - 48.5"
Option "SecondMonitorVertRefresh" "50-90"
# Option "MetaModes" "1024x768, 1152x864"
Option "MetaModes" "1024x768, 1024x768"
# Option "MetaModes" "1152x864, 1152x864"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "CRT, CRT"
EndSection


# ************************************************** ********************
# Screen sections
# ************************************************** ********************

Section "Screen"
Identifier "Screen 1"
Device "NV35"
Monitor "Sony Trinitron"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
# Virtual 1600 1280
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
# Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
#Virtual 1152 900
EndSubsection
EndSection

# ************************************************** ********************
# ServerLayout sections.
# ************************************************** ********************

Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
pkaler@bob X11 $
ParveenKaler is offline   Reply With Quote
Old 01-30-04, 09:13 PM   #3
whig
550Ti
 
Join Date: Jan 2004
Location: New Zealand
Posts: 854
Default

Try earlier versions of the driver.
whig is offline   Reply With Quote
Old 01-30-04, 09:48 PM   #4
ParveenKaler
Registered User
 
Join Date: Jan 2004
Location: Vancouver
Posts: 4
Send a message via ICQ to ParveenKaler
Default

4496 works for me. Both 5536 and 5348 drivers lockup on me.
ParveenKaler is offline   Reply With Quote
Old 01-30-04, 10:40 PM   #5
ParveenKaler
Registered User
 
Join Date: Jan 2004
Location: Vancouver
Posts: 4
Send a message via ICQ to ParveenKaler
Default

My caps lock and scroll lock keys flash when X locks up. So it may be a kernel panic. Here's the tail end of some more info:

Quote:
# dmesg | ksymoops -k /proc/ksyms
...
...
Warning (compare_maps): mismatch on symbol xrlim_allow , ksyms_base says c033debc, System.map says c032544e. Ignoring ksyms_base entry
Warning (compare_maps): mismatch on symbol xtime , ksyms_base says c014bf00, System.map says c045d2a0. Ignoring ksyms_base entry
Warning (compare_maps): mismatch on symbol yield , ksyms_base says c01a044c, System.map says c011a351. Ignoring ksyms_base entry
Warning (compare_maps): mismatch on symbol zone_table , ksyms_base says c014e8f0, System.map says c045e610. Ignoring ksyms_base entry
Warning (compare_maps): mismatch on symbol _nv000173rm , nvidia says e0ab7bc0, /lib/modules/2.4.22-gentoo-r1/kernel/drivers/video/nvidia.o says e0ab79a0. Ignoring /lib/modules/2.4.22-gentoo-r1/kernel/drivers/video/nvidia.o entry
SGI XFS snapshot 2.4.22-2003-09-03_04:09_UTC with realtime, no debug enabled
aec671x_detect:
DC390: 0 adapters found
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)

1504 warnings issued. Results may not be reliable.
ParveenKaler is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
NVIDIA Drivers Receive Windows 8 Certification News Archived News Items 0 06-01-12 05:30 AM
Enhance Max Payne 3, Diablo III with GeForce R300 Drivers News Archived News Items 0 05-22-12 06:30 PM
Creative drivers ? SparrowHawk General Hardware 39 11-18-02 08:03 AM
Radeon 9700 not all that? sancheuz Other Desktop Graphics Cards 200 10-12-02 09:31 PM
Nvidia Stereo Drivers Soudontsay NVIDIA Windows Graphics Drivers 2 08-26-02 10:48 AM

All times are GMT -5. The time now is 06:44 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.