Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Thread Tools
Old 01-30-04, 04:31 PM   #1
Registered User
Join Date: Jan 2004
Posts: 13
Default Configuring a 2.6.1 kernel for an nForce 3 board

I put this in the other Linux forum, but I've not had a response. This is slightly urgent, so I'll repost here.

The last of my parts have arrived, and I'm configuring an appropriate kernel for it. For the most part, I know what I need (as I'm pulling lots of components from my previous machine). I'm currently only stuck on AGPART and ATAPI/IDE drivers.

The motherboard is a Chaintech ZNF3-150 (nforce 3 chipset, natch). I've heard that the nForce drivers from nvidia's site don't work with the nforce3 chipset, or that there's some kind of complication, at least with using them with a GeForce series card (which is what I'll be using), and that the kernel's own AGPART is recommended. Thus far, that's what I'm planning to use with the NVIDIA nforce/nforce2 chipset support. Anyone want to tell me otherwise?

I'm a little more confused with IDE support. I have a 120GB IDE drive that I must have working with the system (my /home filesystem is there -- fortunately / is on a SCSI drive and I know how to make that work). I see an "AMD and nVidia IDE support", should I use that or is something else more appropriate?

Fast answers would be appreciated. Right now I'm letting the components sit and warm up gradually as they've been in the cold for a little longer than I would have liked, but I'll hopefully be able to assemble and configure tonight.
Dimensio is offline   Reply With Quote
Old 01-30-04, 05:04 PM   #2
Registered User
Join Date: Jan 2004
Posts: 17

nforce3 AGPGART worked for me on a GA-K8N after applying patches from x86-64.org.
AFAIK IDE controller should be supported by a standard kernel(it worked as it should for me without any patches, and I think it was the driver you saw).
Sudonix is offline   Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Random crashes, NVRM Xid messages Iesos NVIDIA Linux 90 10-04-12 03:27 AM
Corrupted display - 302.17 - Dell Precision T3500 (G98 [Quadro NVS 295]) gbailey NVIDIA Linux 1 06-27-12 10:24 AM
UEFI+Nvidia - NVRM: Your system is not currently configured to drive a VGA console... interzoneuk NVIDIA Linux 0 06-26-12 04:51 AM
xorg locks-up with newest nvidia drivers w/ vdpau. theroot NVIDIA Linux 1 06-24-12 11:04 AM
Crash when logout from X TGL NVIDIA Linux 10 09-13-02 08:22 PM

All times are GMT -5. The time now is 11:12 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.