Mandrake 9 / G4 TI4600 / Long error list...

Fluxism · 10-02-02, 08:43 PM

Hi,

I tried to install the following drivers on Mandrake 9 / G4 TI4600. NVIDIA_kernel-1.0-3123.tar.gz, NVIDIA_GLX-1.0-3123.tar.gz. Untared the files, cd to dir then make install, tried to install the kernal first... And got a huge long list of errors (please see the attached file). I really dont know where to go from here, noob insults are welcome so long as you include a how to fix it

Thanks in advance.

mtrr · 10-02-02, 08:46 PM

as always with mandrake and redhat: please install kernel sources,
dig through the forum a little and you'll read that _many_ times.

the bunch of error messages are from some modded include files.

cheers

btw as someone told me the sources are on the 3rd CD.

Fluxism · 10-02-02, 08:50 PM

Fast reply, only hit refresh once

The wierd thing is, i installed Mandrake first time round, then the vga drivers, all went in fine, no problems at all. Then I reformatted both Windoze / Mandrake partitions, resized them (more to nix) reinstalled again, and then using exactly the same drivers / same install method, i get the massive error list...

mtrr · 10-02-02, 08:55 PM

yeah, but those errors result from _not_ having kernel-source or at
least configured headers laying around (in the right place off course)

cheers

Fluxism · 10-02-02, 08:59 PM

Ok, thanks mtrr,

/me goes to find an idiots guide to installing from the sources.

mtrr · 10-02-02, 09:17 PM

don't need an "idiots" guide.

just install the kernel-sources from your MDK cd.

then rebuild again.

btw: I PMed you.

cheers

Fluxism · 10-02-02, 09:54 PM

Ahhh, but i DO need an idiots guide. You see, you say install the kernal sources, and i think 'eh?'.
I been on clik clik windozes for too long.. But I on the road now...

(soz about the PM)

Fluxism · 10-03-02, 03:18 PM

Just as an update and to close this thread, it seems that the reason why the drivers installed first time and then not the second was due to not installing the kernal sources when I installed Mandrake.
So a small word of advice to fellow newcomers to linux is to MAKE SURE you install the kernal sources when you install the O/S. Then it's a simple matter of starting without X then login in as root, then;

tar zxf NDIVIA_k*
tar zxf NVIDIA_G*
cd NVIDIA_k*
make install
cd ../NVIDIA_G*
make install

Then you need to alter the device "nv" part of your XConfig to read device "nvidia".

And that (touch wood) is that

10-03-02, 05:05 PM

I can't seem ti find the kernel-source package. I've searched in the Mnadrake Install Software thing, but it comes up with no results...and when I search for kernel, its lists:

kernel-doc
kernel-enterprise
kernel-secure
kernel-smp

Don't tell me I have to reinstall the whole thing, I'm just a novice at this, and it was easy installing the drivers for 8.2 cause they came pre-packaged...heh...this is slightly harder.

Thanks in advance for your help!

mtrr · 10-03-02, 05:09 PM

3rd CD, international package (at least that't what I read in some other threads yesterday)

cheers

10-03-02, 05:10 PM

noo!!! Don't tell me that, I only got the first 2, I'm sure as hell not DLing an entire CD just to get 1 package...is there any other way I can get the package?

mtrr · 10-03-02, 05:27 PM

urpmi should be the tool of choice

dunno syntax, I'm no MDK or RH user.

cheers

10-03-02, 05:05 PM	#9
novafluxx Guest Posts: n/a	I feel stupid I can't seem ti find the kernel-source package. I've searched in the Mnadrake Install Software thing, but it comes up with no results...and when I search for kernel, its lists: kernel-doc kernel-enterprise kernel-secure kernel-smp Don't tell me I have to reinstall the whole thing, I'm just a novice at this, and it was easy installing the drivers for 8.2 cause they came pre-packaged...heh...this is slightly harder. Thanks in advance for your help!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mandrake Linux 9.0 (Dolphin) now available \| comments?	volt	General Linux	10	10-19-02 10:13 PM
Mandrake 9 and nVidia drivers	HunterA3	NVIDIA Linux	9	10-09-02 02:54 AM
Mandrake 9.0 driver installation	Andy Mecham	NVIDIA Linux	3	10-02-02 04:12 PM
Mandrake 8.2 first time user...	mcortz_2000	NVIDIA Linux	3	09-26-02 01:51 PM
Mandrake 9 and Geforce 4	goyo	NVIDIA Linux	1	08-18-02 04:18 PM

10-02-02, 08:46 PM	#2
mtrr Registered User Join Date: Jul 2002 Location: Germany Posts: 234	as always with mandrake and redhat: please install kernel sources, dig through the forum a little and you'll read that _many_ times. the bunch of error messages are from some modded include files. cheers btw as someone told me the sources are on the 3rd CD.

10-02-02, 08:50 PM	#3
Fluxism Registered User Join Date: Oct 2002 Posts: 8	Fast reply, only hit refresh once The wierd thing is, i installed Mandrake first time round, then the vga drivers, all went in fine, no problems at all. Then I reformatted both Windoze / Mandrake partitions, resized them (more to nix) reinstalled again, and then using exactly the same drivers / same install method, i get the massive error list...

10-02-02, 08:55 PM	#4
mtrr Registered User Join Date: Jul 2002 Location: Germany Posts: 234	yeah, but those errors result from _not_ having kernel-source or at least configured headers laying around (in the right place off course) cheers

10-02-02, 08:59 PM	#5
Fluxism Registered User Join Date: Oct 2002 Posts: 8	Ok, thanks mtrr, /me goes to find an idiots guide to installing from the sources.

10-02-02, 09:17 PM	#6
mtrr Registered User Join Date: Jul 2002 Location: Germany Posts: 234	don't need an "idiots" guide. just install the kernel-sources from your MDK cd. then rebuild again. btw: I PMed you. cheers

10-02-02, 09:54 PM	#7
Fluxism Registered User Join Date: Oct 2002 Posts: 8	Ahhh, but i DO need an idiots guide. You see, you say install the kernal sources, and i think 'eh?'. I been on clik clik windozes for too long.. But I on the road now... (soz about the PM)

10-03-02, 03:18 PM	#8
Fluxism Registered User Join Date: Oct 2002 Posts: 8	Just as an update and to close this thread, it seems that the reason why the drivers installed first time and then not the second was due to not installing the kernal sources when I installed Mandrake. So a small word of advice to fellow newcomers to linux is to MAKE SURE you install the kernal sources when you install the O/S. Then it's a simple matter of starting without X then login in as root, then; tar zxf NDIVIA_k* tar zxf NVIDIA_G* cd NVIDIA_k* make install cd ../NVIDIA_G* make install Then you need to alter the device "nv" part of your XConfig to read device "nvidia". And that (touch wood) is that

10-03-02, 05:09 PM	#10
mtrr Registered User Join Date: Jul 2002 Location: Germany Posts: 234	3rd CD, international package (at least that't what I read in some other threads yesterday) cheers

10-03-02, 05:10 PM	#11
novafluxx Guest Posts: n/a	noo!!! Don't tell me that, I only got the first 2, I'm sure as hell not DLing an entire CD just to get 1 package...is there any other way I can get the package?

10-03-02, 05:27 PM	#12
mtrr Registered User Join Date: Jul 2002 Location: Germany Posts: 234	urpmi should be the tool of choice dunno syntax, I'm no MDK or RH user. cheers