NVIDIA 1.0-5336 fails to initialize on kernel 2.4.20-30.9

[X-Series]

I installed the NVIDIA 1.0-5336 driver on kernel 2.4.20-8 and it worked great! Using Red Hat Network, I updated my kernel to 2.4.20-30.9 and rebooted only to be told that:

(EE) NVIDIA(0) Failed to initialize the NVIDIA kernel module
(EE) Screen(s) found, but none have a usable config

I re-installed the driver under the new kernel only to be told:

unable to determine the NVIDIA kernel module filename

Can anyone help?


X-Series.
[OS] Red Hat 9 Linux 2.4.20-30.9, NVIDIA 1.0-5336, Video Card: Asus V9520 TD FX5200

[LordMorgul]

Install driver (making sure it either compiles the new one or has one prebuilt). Verify that the module is placed in /lib/modules/`uname -r`/kernel/drivers/video
run the command: depmod
Then try: modprobe nvidia

[ettyus]

same problem and that solution dont worck for me pls help if this is possiblle
same kernel same RH 9.0

Thnx

[andyrock]

If you upgrade the kernel, you must upgrade your kernel source as well.

Sometimes one must do the following:

cd /usr/src/linux
cp /boot/config-2.4.22-xxxxxxx ./.config
make dep

sh nvidia-installer5336xxxxx.run -K

let us know if this work

[ettyus]

yes it works for me after i install kernel-sources 2.4.20-30.9 this was my problem

THNX anyway