|04-11-04, 01:23 PM||#1|
Join Date: Apr 2004
Knoppix/Windows9x/NForce1 Network Controller Problem
New Linux user,long time Windows user here ( so take it slow and use small words and easy concepts when replying. )
I hope that someone here knows the answer to my problem.
After the first time that I got Knoppix Linux Ver.3.3 2004-2-16 to bootup and run normally from the CD-ROM everything worked fine but when I rebooted back into Windows ME the driver for the onboard network controller refused to load.Have tried everything I can think of to fix it,removed and reinstalled driver,turned network adapter off and on in the BIOS,even removed and reinstalled Windows ME (was due for reinstalling,had been running 2+ years,had to make room on hard drive for Linux installation )
Network adapter works fine under Linux but won't work under Windows anymore.
Anybody got any ideas on how to fix this?
Thanks In Advance.
MSI K7N420D Pro motherboard
AMD AlthonXP 1600+
128 MB GForce 3 TI 200 AGP (primary display)
16 MB ATI Rage Pro PCI (secondary display)
32 MB GForce 2 MX (onboard,disabled)
Nvidia SoundStorm Audio (onboard,5.1,dolby digital)
Nvidia 100/10 base T ethernet adapter (onboard)
Seagate 20 GB HD x2
CD-RW x2 (1 Sony, 1 L.G.)
Knoppix/Debian Linux (dual boot, Windows & Linux)
|04-17-04, 10:25 PM||#2|
Join Date: Apr 2004
Re: Knoppix/Windows9x/NForce1 Network Controller Problem
Work Around Found!
I figured out how to fix the problem everytime it happens.This may not work for anyone else but here goes.
1st In the BIOS set "Advanced BIOS Features -Boot Other Device" to Enable.
2nd This is the part that may not work for anyone else as my system has 2 hard drives ,primary IDE master (Windows/Linux bootable) and slave (fat32,data,nonbootable). when Linux installed Lilo in the Master Boot Record on the bootable drive (C: , HDA ) it detected the nonbootable drive ( D: , HDB ) and made an entry in Lilo.config giving me the option of trying to boot off the nonbootable drive, when that fails it triggers the motherboard BIOS's boot on lan feature which resets the onboard ethernet adapter to default settings undoing whatever changes forcedeth is applying to the adapter allowing the Windows Drivers to load when Windows starts up.
Its kinda messy but it works.
|Thread||Thread Starter||Forum||Replies||Last Post|
|295.53: the kernel needs "acpi=off", thinkpad T420, nvs 4200M||Imbrius||NVIDIA Linux||1||05-27-12 07:18 PM|
|Tiny Georgia telco files first network neutrality complaint||News||Archived News Items||0||05-22-12 07:40 PM|
|Help Networking Problem||Essense||Microsoft Windows XP And Vista||6||10-16-02 11:09 AM|
|Nvidia Go on laptop, black border within XFree86 problem||raxip||NVIDIA Linux||3||07-31-02 11:58 AM|