Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 06-07-04, 08:40 AM   #1
hprotheroe
Registered User
 
Join Date: Feb 2004
Posts: 5
Default Display glitches..

Hello,
I have my monitor working but seems to have several glitches.

- On loading i have lost the nvidia splash that i had and now get a black screen.
- When i drag windows around i get redraw lines all over the place.

Following is my XF86Config file. It is a total bodge and doesn't even state the correct memory for the card. If anybody has any suggestions as to how to optimise it would be very much appreciated.

Running - Redhat 2.4.20-31.9
Card Nvidia Quadro FX500 (128mb)
Monitor 21" Philips 201B4 Recommended resolution - 1600 x 1200 at 91Hz

*********************************************
# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "cursor" "SendCoreEvents"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"

EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "wacom"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/event0" # USB ONLY
Option "Type" "cursor"
Option "USB" "on" # USB ONLY

EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/event0" # USB ONLY
Option "Type" "stylus"
Option "USB" "on" # USB ONLY

EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/event0" # USB ONLY
Option "Type" "eraser"
Option "USB" "on" # USB ONLY

EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "PHILIPS 201B"
DisplaySize 400 300
HorizSync 30.0 - 115.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA Quadro FX500"
VideoRam 131072
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

****************************************

Thanks in advance.

Howard
hprotheroe is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Russian Masterpieces Put on Display Using NVIDIA GPU Technology News Latest Tech And Game Headlines 0 06-25-12 04:10 PM
302.07 (beta) for Linux x86/x86_64 released AaronP NVIDIA Linux 0 05-02-12 09:55 AM
Glx mrbig1344 NVIDIA Linux 7 09-30-02 06:45 AM
Suse 8.0 Dual display on Quadro 4 700XGL TheCowStir NVIDIA Linux 3 08-10-02 12:16 PM
Dual Display with main CRT, and secondary TV-out BlackDogg NVIDIA Linux 3 08-10-02 09:52 AM

All times are GMT -5. The time now is 12:15 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.