|10-20-02, 03:20 AM||#1|
Join Date: Oct 2002
Help not getting performance that others are with geforce 4 ti 4200 128meg
Im only getting just over 8000 3dmarks with my rig when people with lower spec cpus etc are getting much higher.
Athlon xp 2000+ cpu not overclocked
MSI K7T Turbo ltd Edition Mobo using via 4.43 drivers
1024 Meg PC133 ram
Albatron geforce 4 ti 4200 128meg overclocked to 275/650 using 40.72 drivers
SB Live 5.1 using windows update drivers
60 gig western digital ata 100 7200rpm hard drive
420 watt coolermaster power supply
agp aperture is 128meg
fsb not overclocked
Last edited by Rashman; 10-20-02 at 04:59 AM.
|10-20-02, 08:14 AM||#3|
QuadCore G80 PS3 Overload
Join Date: Jul 2002
Location: In a small room surrounded by vast, inscrutable, machines...
Your PC133 ram will be causing a little bit of a bottle kneck, especially in the madbunion tests. Try uping the speed of your FSB, that may make up a little for your memory.
After that try oc'ing you 4200, cranking up the core speed will improve fill rates, aniso, and stuff. Cranking up your memory speed will incease FSAA and general rendering speed.
Folding for Beyond3D
"A lie gets halfway around the world before the truth has a chance to get its pants on."
Sir Winston Churchill
"Halflife2 got halfway around the world before Gabe had a chance to get his pants on."
|10-20-02, 11:40 AM||#4|
Even though your using sdram you still shouldnt have much of a problem cracking 10,000...
After looking at your 3dmark results and seeing normalish nature and dragothic scores for your setup(these scores are very video card dependent) and a solid 1059 single texturing score I have some suggestions as to where to start looking for your problems.
first I would dump half your ram for testing purposes, more isnt always better ram wise when using sdr. I'm guesing your using 512x2 so pull a stick out(if it is 256x4 or 512 + 256x2 do what you need so that only 1 memory slot is populated) next pull that sblive(they love to fight for irq's with geforce cards, actually any vid card )
Then, check you bios settings for your ram timings -you want them to be as fast as possible without causing instability.
retest and we can go from there.
btw -are you using the 4200 turbo ? 650 on the mem side is stellar but just about impossible with tsop mem without a volt mod -for the 3.3ns bga on albatrons turbo model its a piece of cake.
You prolly allready know this but with an upgrade to ddr and a little bit of overclocking you could easily best my 3dmark of 13048 with that card.
|10-20-02, 12:55 PM||#5|
Join Date: Oct 2002
Thanks for the tips guys, i earlier overclocked my graphics card and got an extra 150 3dmarks!
I tested with and without the sound card and got no change really.
BUT i took 512 meg of ram out and made sure the cas was 2and i got a jump of 500 3dmarks!!
I didnt realise the more ram you have the worse your 3d performance is!! Baffling!
I also found out that my motherboard should only go up to athlonxp 1800+ max, so i think a change of mobo and ram is a definate!! Cheers once again guys, cant wait to get the new board, might check the new msi boards out.
BTW Yes i am using the albatron geforce 4 ti 4200 Turbo 128 meg, without extra cooling i now overclock it to 290/695!!!!!!! And this is very stable!!
Im looking forward to beating that score walkndude!!
|10-20-02, 01:30 PM||#6|
Join Date: Jul 2002
Rashman, you should definately be getting more!
Here is a compare link to my radeon 8500LE
|Thread||Thread Starter||Forum||Replies||Last Post|
|Boost Far Cry 3's Performance With New GeForce Drivers||News||Latest Tech And Game Headlines||0||11-28-12 03:30 PM|
|Poor performance with GeForce Go 7300 using driver 304.51||kalif||NVIDIA Linux||3||10-10-12 06:06 PM|
|Performance Analysis of IB FDR and 40GigE RoCE on HPC and Cloud||News||Latest Tech And Game Headlines||0||08-26-12 07:30 PM|
|NVIDIA Unleashes the GeForce GTX 670 Graphics Card ' Performance Perfected (WCCFTECH)||News||GeForce GTX 670 Reviews||0||05-10-12 09:40 AM|
|My UT2003 Tweak Guide||DXnfiniteFX||Gaming Central||48||10-31-02 12:59 AM|