Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 06-25-04, 10:13 PM   #1
Willis
Registered User
 
Join Date: Jun 2004
Posts: 11
Default is agp loaded?

running fedora core 2:
3.06 p4 533 mhz
1 gig ddr 400
system seems stable so far
glxgears = ~2300
i think thats kinda low for glxgears so i poked around
some interesting "dmesg" output:

nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 1 8:29:26 PST 2004
0: nvidia: cannot write-combine 0xc0000000, 256M
0: nvidia: cannot write-combine 0xc0000000, 256M

some "cat" of /dev/drivers/nvidia/agp
$]cat card
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0x1f000e1b:0x00000000

$]cat host-bridge
Host Bridge: PCI device 1106:3168
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0x1f000a1b:0x1f000000

$]cat status
Status: Disabled

is agp disabled? should i be getting better performance?
its not running "bad" but can it run better?

glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.3
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_ARB_multisample, GLX_NV_float_buffer
client glx vendor string: NVIDIA Corporation
client glx version string: 1.3
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_NV_float_buffer
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_ARB_multisample, GLX_NV_float_buffer, GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: unknown board/PCI/SSE2
OpenGL version string: 1.4.1 NVIDIA 53.36
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
GL_S3_s3tc, GL_EXT_texture_env_add, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_minmax,
GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_shared_texture_palette, GL_EXT_stencil_two_side,
GL_EXT_stencil_wrap, GL_EXT_texture3D, GL_EXT_texture_compression_s3tc,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
GL_HP_occlusion_test, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_KTX_buffer_region, GL_NV_blend_square,
GL_NV_copy_depth_to_color, GL_NV_depth_clamp, GL_NV_fence,
GL_NV_float_buffer, GL_NV_fog_distance, GL_NV_fragment_program,
GL_NV_half_float, GL_NV_light_max_exponent, GL_NV_multisample_filter_hint,
GL_NV_occlusion_query, GL_NV_packed_depth_stencil, GL_NV_pixel_data_range,
GL_NV_point_sprite, GL_NV_primitive_restart, GL_NV_register_combiners,
GL_NV_register_combiners2, GL_NV_texgen_reflection,
GL_NV_texture_compression_vtc, GL_NV_texture_env_combine4,
GL_NV_texture_expand_normal, GL_NV_texture_rectangle,
GL_NV_texture_shader, GL_NV_texture_shader2, GL_NV_texture_shader3,
GL_NV_vertex_array_range, GL_NV_vertex_array_range2, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_NV_vertex_program2, GL_NVX_ycrcb,
GL_SGIS_generate_mipmap, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SGIX_shadow, GL_SUN_slice_accum
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
Willis is offline   Reply With Quote
Old 06-26-04, 02:21 AM   #2
blueworm
[DEADAGAIN]blueworm
 
blueworm's Avatar
 
Join Date: Mar 2003
Posts: 416
Default Re: is agp loaded?

No it is not loaded. It should read
Code:
bash-2.05b$ cat /proc/driver/nvidia/agp/status 
Status:          Enabled
Driver:          AGPGART
AGP Rate:        8x
Fast Writes:     Enabled
SBA:             Enabled
bash-2.05b$
or
Code:
bash-2.05b$ cat /proc/driver/nvidia/agp/status 
Status:          Enabled
Driver:          NvAGP
AGP Rate:        8x
Fast Writes:     Enabled
SBA:             Enabled
bash-2.05b$
__________________
Registered linux user #271604 Get Counted! http://counter.li.org/
lianLi PC60, OCZ powerStream 520W PSU, Asus P5N-E SLI, Core 2 duo E6550, 2Gb GEIL, XFX 8800GT, TB SantaCruz
blueworm is offline   Reply With Quote
Old 06-26-04, 08:41 PM   #3
Willis
Registered User
 
Join Date: Jun 2004
Posts: 11
Default Re: is agp loaded?

man i just can't get it to load any agp.
i attached some files if you could possibly help, any help would be appreciated.
i dont see where it is failing cept for maybe that

0: nvidia: cannot write-combine 0xc0000000, 256M
Attached Files
File Type: txt xorg.conf.txt (3.0 KB, 157 views)
File Type: txt lspci.txt (19.1 KB, 188 views)
File Type: txt xorg.log.txt (25.2 KB, 142 views)
File Type: txt dmesg.txt (15.0 KB, 152 views)
Willis is offline   Reply With Quote
Old 06-27-04, 12:48 AM   #4
blueworm
[DEADAGAIN]blueworm
 
blueworm's Avatar
 
Join Date: Mar 2003
Posts: 416
Default Re: is agp loaded?

First if all try change
Code:
Options ¨NvAGP¨ ¨2¨
In the device section of you xorg.conf.
It should´nt work but you will need it like that for later.

It seems that you have a via chipset that is not supported by Nvidias NvAGP.
There is a list of supported chipsets in the manual.
Therefore what you need to do is use AGPGART which you do not have compilled into your kernel.
It whould also be a goof idea to add SMP to your kernel since you do have a HT cpu.
__________________
Registered linux user #271604 Get Counted! http://counter.li.org/
lianLi PC60, OCZ powerStream 520W PSU, Asus P5N-E SLI, Core 2 duo E6550, 2Gb GEIL, XFX 8800GT, TB SantaCruz
blueworm is offline   Reply With Quote
Old 06-27-04, 03:48 AM   #5
Willis
Registered User
 
Join Date: Jun 2004
Posts: 11
Default Re: is agp loaded?

further looking into the readme at nvidia i discovered that my chipset isnt supported by nvidia thanks for pointing that out blueworm, also i had ht disabled in bios that run to see if its ht problem, i have now narrowed the problem to this which i can't seem to solve the reason for it
(i think its the problem i could be wrong)

cat /proc/mtrr
reg00: base=0x00000000 ( 0MB), size=1024MB: write-back, count=1
reg01: base=0xc0000000 (3072MB), size= 32MB: write-combining, count=1
reg02: base=0xd0000000 (3328MB), size= 256MB: write-combining, count=1

dmesg
mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x2000000
0: NVRM: AGPGART: unable to set MTRR write-combining

somehow i think nvidia driver is reading reg01 when it should be reading reg02,
any ideas on how to solve that?
Willis is offline   Reply With Quote
Old 06-27-04, 04:25 AM   #6
blueworm
[DEADAGAIN]blueworm
 
blueworm's Avatar
 
Join Date: Mar 2003
Posts: 416
Default Re: is agp loaded?

Build AGPGART and VIA support into your kernel.
Device Drivers > Charecter devices.
<*> /dev/agpgart (AGP Support)
<*> VIA chipset support
Once you have booted into your new kernel you should see AGPGART in dmesg.
__________________
Registered linux user #271604 Get Counted! http://counter.li.org/
lianLi PC60, OCZ powerStream 520W PSU, Asus P5N-E SLI, Core 2 duo E6550, 2Gb GEIL, XFX 8800GT, TB SantaCruz
blueworm is offline   Reply With Quote
Old 06-27-04, 04:39 AM   #7
Willis
Registered User
 
Join Date: Jun 2004
Posts: 11
Default Re: is agp loaded?

yeah it is loaded into the kernel

dmesg
Linux version 2.6.7 (root@alb-24-195-245-232.nycap.rr.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #2 Sun Jun 27 04:13:55 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 VIAP4X ) @ 0x000f7240
ACPI: RSDT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff6d80
ACPI: DSDT (v001 VIAP4X AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 3059.265 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Memory: 1036192k/1048512k available (1803k kernel code, 11412k reserved, 589k data, 140k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 6045.69 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 190k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1088310609.528:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (0 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA P4M266x/P4N266 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio
hdb: LTN526, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IBM-DPTA-372050, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63, UDMA(66)
hdc: hdc1 hdc2 hdc3
hdb: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 140k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device c031c9c0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x2000000
0: NVRM: AGPGART: unable to set MTRR write-combining
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 11, pci mem f8983000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 11, io base 0000d400
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 10, io base 0000d800
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 5, io base 0000dc00
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
EXT3 FS on hdc2, internal journal
usb 2-1: new low speed USB device using address 2
input: USB HID v1.00 Keyboard [ORTEK ORTEK USB Combo Keyboard] on usb-0000:00:10.0-1
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
input,hiddev96: USB HID v1.00 Device [ORTEK ORTEK USB Combo Keyboard] on usb-0000:00:10.0-1
usb 2-2: new low speed USB device using address 3
input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2
cdrom: open failed.
Adding 2047744k swap on /dev/hdc3. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
microcode: No suitable data for cpu 0
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
SCSI subsystem initialized
inserting floppy driver for 2.6.7
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xc000, 00:50:bf:e9:4e:9f, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
divert: allocating divert_blk for eth1
eth1: RealTek RTL8139 at 0xcc00, 00:50:2c:06:54:44, IRQ 5
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
divert: freeing divert_blk for eth0
divert: freeing divert_blk for eth1
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.27
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xc000, 00:50:bf:e9:4e:9f, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
divert: allocating divert_blk for eth1
eth1: RealTek RTL8139 at 0xcc00, 00:50:2c:06:54:44, IRQ 5
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ip_tables: (C) 2000-2002 Netfilter core team
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
eth1: no IPv6 routers present
mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x2000000
0: NVRM: AGPGART: unable to set MTRR write-combining
drivers/usb/input/hid-input.c: event field not found
spurious 8259A interrupt: IRQ7.
Willis is offline   Reply With Quote
Old 06-27-04, 04:46 AM   #8
blueworm
[DEADAGAIN]blueworm
 
blueworm's Avatar
 
Join Date: Mar 2003
Posts: 416
Default Re: is agp loaded?

ok now re-install the Nvidia driver.
Code:
./NVIDIA-Linux-x86-1.0-5336-pkg1.run --extract-only
cd NVIDIA-Linux-x86-1.0-5336-pkg1
make install
__________________
Registered linux user #271604 Get Counted! http://counter.li.org/
lianLi PC60, OCZ powerStream 520W PSU, Asus P5N-E SLI, Core 2 duo E6550, 2Gb GEIL, XFX 8800GT, TB SantaCruz
blueworm is offline   Reply With Quote

Old 06-27-04, 04:46 AM   #9
LordMorgul
Electrical Engineer
 
LordMorgul's Avatar
 
Join Date: Dec 2002
Location: San Luis Obispo, CA
Posts: 872
Default Re: is agp loaded?

Are you running an available 8Kstack kernel or have you compiled your own custom config'd kernel? If you haven't tried this with a pre-built kernel first.. I suggest you do. See 8kstack kernels available from linuxant (link in my sig).
__________________
"..the triumph of evil is for good men to do nothing." (Edmond Burke)
nVIDIA video driver RPMs for Fedora :: see yum repo at livna.org.
LordMorgul is offline   Reply With Quote
Old 06-27-04, 04:59 AM   #10
blueworm
[DEADAGAIN]blueworm
 
blueworm's Avatar
 
Join Date: Mar 2003
Posts: 416
Default Re: is agp loaded?

make sure 4k stacks are turned of in kernel.
Kernel Hacking >
[ ] Use 4Kb for kernel stacks instead of 8Kb
__________________
Registered linux user #271604 Get Counted! http://counter.li.org/
lianLi PC60, OCZ powerStream 520W PSU, Asus P5N-E SLI, Core 2 duo E6550, 2Gb GEIL, XFX 8800GT, TB SantaCruz
blueworm is offline   Reply With Quote
Old 06-27-04, 05:25 AM   #11
Willis
Registered User
 
Join Date: Jun 2004
Posts: 11
Default Re: is agp loaded?

im using an 8k stacks kernel, 2.6.7 built myself.
here ill load the config.

explaining:
nvidia driver is loaded, i do have X, i just have no agp(nvagp or agpgart).

Module Size Used by
snd_emu10k1 82568 3
snd_rawmidi 19364 1 snd_emu10k1
snd_pcm 80392 1 snd_emu10k1
snd_timer 19972 1 snd_pcm
snd_seq_device 7048 2 snd_emu10k1,snd_rawmidi
snd_ac97_codec 60420 1 snd_emu10k1
snd_page_alloc 9096 2 snd_emu10k1,snd_pcm
snd_util_mem 3840 1 snd_emu10k1
snd_hwdep 7428 1 snd_emu10k1
snd_mixer_oss 16768 1
snd 44260 13 snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_ device,snd_ac97_codec,snd_util_mem,snd_hwdep,snd_m ixer_oss
soundcore 7008 2 snd
autofs4 15236 0
sunrpc 123492 1
8139too 20224 0
mii 4224 1 8139too
floppy 53328 0
sg 31648 0
scsi_mod 100556 1 sg
microcode 5664 0
joydev 8256 0
dm_mod 37408 0
uhci_hcd 27792 0
ehci_hcd 26500 0
button 5016 0
battery 7564 0
asus_acpi 9368 0
ac 3724 0
nvidia 2073032 12
ipv6 209760 6
ext3 103528 2
jbd 46872 1 ext3

yes, 4 million modules loaded, love fedora. no agp though
Attached Files
File Type: txt config.txt (40.1 KB, 172 views)

Last edited by Willis; 06-27-04 at 05:30 AM. Reason: explaining
Willis is offline   Reply With Quote
Old 06-27-04, 10:29 AM   #12
blueworm
[DEADAGAIN]blueworm
 
blueworm's Avatar
 
Join Date: Mar 2003
Posts: 416
Default Re: is agp loaded?

I´ve just looked thryu your .config
I felt like a teacher without red ink...
remove this:
CONFIG_REGPARM=y
You should learn a little about your system and what drivers you actually need.
The lets compile everything approach is kinda messy.
Once you get the hang of it you wont even need to build anything as a module.
__________________
Registered linux user #271604 Get Counted! http://counter.li.org/
lianLi PC60, OCZ powerStream 520W PSU, Asus P5N-E SLI, Core 2 duo E6550, 2Gb GEIL, XFX 8800GT, TB SantaCruz
blueworm is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gentoo and agp trouble john36 NVIDIA Linux 2 09-12-02 10:36 PM
agp 440bx/zx tntultar32 t00bad NVIDIA Linux 1 09-11-02 02:46 PM
How much heat can a GeForce4 Ti 4600 handle? Velkator NVIDIA GeForce 7, 8, And 9 Series 4 09-03-02 04:41 PM
X freezes when agp 4x is enabled jinksed NVIDIA Linux 1 08-07-02 04:56 PM
Will AGP 8X increase performance over AGP 4X? sancheuz NVIDIA GeForce 7, 8, And 9 Series 10 07-29-02 08:37 PM

All times are GMT -5. The time now is 11:00 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.