Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 10-20-02, 02:39 PM   #1
October
Registered User
 
Join Date: Oct 2002
Posts: 16
Question enable AGP with SiS chipset?

Intel P4 2.53Ghz
Asus P4S533-VF
1024MB Samsung 333DDR
Leadtek GeForce 4 A250TD Ultra Ti4600
Mandrake 9.0 (Dolphin)

various cats show:

[overlord@BIGGUN2 nvidia]$ cat agp/card
Fast Writes: Supported
SBA: Supported
AGP Rates: 4x 2x 1x
Registers: 0x1f000217:0x00000000
[overlord@BIGGUN2 nvidia]$ cat agp/host-bridge
Host Bridge: SiS (unknown)
Fast Writes: Not Supported
SBA: Supported
AGP Rates: 4x 2x 1x
Registers: 0x1f000207:0x00000000
[overlord@BIGGUN2 nvidia]$ cat agp/status
Status: Disabled
[overlord@BIGGUN2 nvidia]$ cat cards/0
Model: GeForce4 Ti 4600
IRQ: 11
Video BIOS: 04.25.00.30.00
Card Type: AGP
[overlord@BIGGUN2 nvidia]$ cat version
NVRM version: NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue Aug 27 15:56:48 PDT 2002
GCC version: gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)
[overlord@BIGGUN2 nvidia]$


What can I do to further optimize this system? The part that bothers me in particular is:

[overlord@BIGGUN2 nvidia]$ cat agp/status
Status: Disabled

I'm fairly new to linux so if advice gets techy or points to some RTFM or something PLEASE be specific and in detail?

Thanks in advance!
October is offline   Reply With Quote
Old 10-20-02, 04:38 PM   #2
Soul-Crusher
Leadtek 6800GT
 
Join Date: Aug 2002
Location: Albuquerque, NM, USA
Posts: 195
Send a message via ICQ to Soul-Crusher Send a message via AIM to Soul-Crusher Send a message via Yahoo to Soul-Crusher
Default

That is strange. I'm running a K7S6A (SiS 745 chipset for the Athlon) and it detected AGP just fine. They aren't the same, however, but they shouldn't be all that different.

You might want to double check your BIOS settings and make absolutely sure you have AGP 4X enabled, as well as SBA (Side band adressing) and fast writes.
__________________
"Floating in a dream-like state, I am the emporer of a parallel universe." --Arch Enemy
My xorg.conf file
Soul-Crusher is offline   Reply With Quote
Old 10-20-02, 06:18 PM   #3
bwkaz
Registered User
 
Join Date: Sep 2002
Posts: 2,262
Default

Is X running when you're doing these cat commands?

Do you have Option "NvAgp" "0" set in your config file, which will disable AGP?
__________________
Registered Linux User #219692
bwkaz is offline   Reply With Quote
Old 10-20-02, 07:07 PM   #4
October
Registered User
 
Join Date: Oct 2002
Posts: 16
Default

Yes, X is running. Sorry for the LONNNGGG post but I have no place to store files currently online...

Here is my XF86Config-4 (followed by log below):

[root@BIGGUN2 agp]# cat /etc/X11/XF86Config-4
# File generated by XFdrake.

# ************************************************** ********************
# Refer to the XF86Config man page for details about the format of
# this file.
# ************************************************** ********************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/usbmouse"
Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "ViewSonic"
ModelName "ViewSonic A90"
HorizSync 30-86
VertRefresh 50-180

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
BoardName "NVIDIA GeForce4 (generic)"
Driver "nvidia"
Option "DPMS" "on"
Option "NvAGP" "3"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
[root@BIGGUN2 agp]#
October is offline   Reply With Quote
Old 10-20-02, 07:13 PM   #5
October
Registered User
 
Join Date: Oct 2002
Posts: 16
Default

And yes, I went back into my BIOS and doubled checked the AGP settings.

Here are the relevant bits of XFree86.0.log:


[root@BIGGUN2 agp]# cat /var/log/XFree86.0.log

XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 20 16:47:28 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000502c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)

--snip--

(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)

--snip--

(II) Bus -1: bridge is at (0:2:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) NVidia 0x0250 rev 163, Mem @ 0xdf000000/24, 0xf0000000/27, 0xef800000/19, BIOS @ 0xef7e0000/17
(II) Addressable bus resource ranges are

--snip--

(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.3123
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.3123
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) v4l driver for Video4Linux
(II) NVIDIA XFree86 Driver 1.0-3123 Tue Aug 27 16:00:08 PDT 2002
(II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2, Vanta,
RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
Quadro2 MXR/EX/Go, GeForce2 Integrated GPU, GeForce2 GTS,
GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460,
GeForce4 MX 440, GeForce4 MX 420, Quadro4 500/550 XGL,
Quadro4 200/400 NVS, NV18, NV18 , NV18 , NV18, NV18GL, NV18GL ,
NV18GL , 0x01F0, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500,
Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400, GeForce4 Ti 4200,
Quadro4 900 XGL, Quadro4 750 XGL, Quadro4 700 XGL, NV28, NV28 ,
NV28GL, NV28GL , GeForce2 Go, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce4 Ti 4600 found
(II) resource ranges after xf86ClaimFixedResources() call:

--snip--

(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NvAGP" "3"
(**) NVIDIA(0): Use of any AGP requested (try AGPGART, then try NVIDIA's AGP)
(--) NVIDIA(0): Linear framebuffer at 0xF0000000
(--) NVIDIA(0): MMIO registers at 0xDF000000
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(--) NVIDIA(0): Detected TV Encoder: Philips 7108
(--) NVIDIA(0): Display 0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) NVIDIA(0): monitor1: Using hsync range of 30.00-86.00 kHz
(II) NVIDIA(0): monitor1: Using vrefresh range of 50.00-180.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(WW) (1792x1344,monitor1) mode clock 204.8MHz exceeds DDC maximum 200MHz
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(WW) (1856x1392,monitor1) mode clock 218.3MHz exceeds DDC maximum 200MHz
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(**) NVIDIA(0): Validated modes for Display Device 0:
(**) NVIDIA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): Display dimensions: (370, 270) mm
(--) NVIDIA(0): DPI set to (87, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:

--snip--

(WW) NVIDIA(0): Failed to verify AGP usage
(II) NVIDIA(0): Setting mode "1280x1024"
(II) NVIDIA(0): Using XFree86 Acceleration Architecture (XAA)

--snip--

(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms" "on"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-GLX
(II) Loading extension NV-CONTROL
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) [GLX]: Calling GlxExtensionInit
October is offline   Reply With Quote
Old 10-20-02, 09:20 PM   #6
bwkaz
Registered User
 
Join Date: Sep 2002
Posts: 2,262
Default

What are the few lines right before "failed to verify AGP usage"?

I suppose the problem could be the "Host Bridge: SiS (unknown)" bit...
__________________
Registered Linux User #219692
bwkaz is offline   Reply With Quote
Old 10-20-02, 09:51 PM   #7
chrono86
Registered User
 
Join Date: Oct 2002
Posts: 13
Default

Yup i get the same thing too October

"Failed to verify AGP usage"

also i get

AGP Status: Disabled

although when do "cat agp/host-bridge" it tells me i am running a Via MVP3 chipset. I hope this AGP status isn't coming from the BIOS because my BIOS doesn't say anything about "Enabling" AGP. I'm assuming this is what is keeping my X server from starting with the nvidia driver. Damn everything
-rian
chrono86 is offline   Reply With Quote
Old 10-21-02, 04:10 AM   #8
arise
Registered User
 
Join Date: Oct 2002
Location: Europe
Posts: 93
Default

Try my solution here:
http://www.nvnews.net/vbulletin/show...&threadid=2734

It will work, now I have AGP 4x enabled, as well as FW and SBA.
arise is offline   Reply With Quote

Old 10-23-02, 08:03 PM   #9
October
Registered User
 
Join Date: Oct 2002
Posts: 16
Default

That DOES work! Thanks!!

But now how would a n00b like me go about making this a default action at boot? Is there a relatively easy way?
October is offline   Reply With Quote
Old 10-24-02, 09:07 AM   #10
bwkaz
Registered User
 
Join Date: Sep 2002
Posts: 2,262
Default

Open up /etc/modules.conf in an editor, and add a line to it:

options agpgart agp_try_unsupported=1

Save and exit, and re-run /sbin/depmod -a (you'll probably have to be root to do all of this).
__________________
Registered Linux User #219692
bwkaz is offline   Reply With Quote
Old 10-24-02, 07:51 PM   #11
October
Registered User
 
Join Date: Oct 2002
Posts: 16
Default

Thanks! That did the trick!

On to gaming I go....
October is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
AGP Fast write and SiS 735 not supported ? Chojin NVIDIA Linux 9 10-11-02 06:52 PM
How much heat can a GeForce4 Ti 4600 handle? Velkator NVIDIA GeForce 7, 8, And 9 Series 4 09-03-02 04:41 PM
X freezes when agp 4x is enabled jinksed NVIDIA Linux 1 08-07-02 04:56 PM
X won't start properly, RH7.3 and SiS 645 DX potash NVIDIA Linux 23 08-02-02 03:33 PM
Can't enable AGP mr_dinu NVIDIA Linux 7 07-31-02 02:32 AM

All times are GMT -5. The time now is 08:07 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.