Third pci card initialization problem (GeForce4 mx 4000)

[dni77]

Hi, I have 3 nvidia geforce4 mx 4000 (1 AGP + 2 PCI) and Im getting problems trying to make this boards work at the same time with the nvidia driver.
First I tried with 2 boards, (1 AGP + 1 PCI) and I couldnt initialize tje 2nd card (the PC hangs), after a few hours I figured out that the solution was using the "UseInt10Module" "on" option and then everything worked ok.
Now the problem is that Í cannot initialize the third card.
The PC hangs all the time, Also I tried with the 2 PCI cards whitout the AGP card, and still hangs, any ideas????
I did this before with 3 GeForce4 mx400 and it worked without the "UseInt10Module" option, there is a bug with the mx 4000????

I am using:
Gentoo linux kernel 2.4.27
nvidia driver 1.0-6111
AGP video card bios version 04.18.20.36.00
PCI's video cards bios versions 04.18.20.36.04w
XFree 4.3.0-r7

XF86Config-4 file:

Section "ServerLayout"
Identifier "X0"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "ServerLayout"
Identifier "X1"
Screen 0 "Screen1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "ServerLayout"
Identifier "X3"
Screen 0 "Screen2" 0 0
InputDevice "Mouse2" "CorePointer"
InputDevice "Keyboard2" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "record"
Load "extmod"
Load "dbe"
# Load "dri"
Load "glx"
Load "xtrap"
Load "type1"
Load "speedo"
Load "int10"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection

Section "InputDevice"
Identifier "Keyboard2"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mouse0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "ButtonNumber" "5"
Option "Device" "/dev/input/mouse1"
Option "InputFashion" "Mouse"
Option "Name" "Autodetection"
Option "Protocol" "imps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "ButtonNumber" "5"
Option "Device" "/dev/input/mouse2"
Option "InputFashion" "Mouse"
Option "Name" "Autodetection"
Option "Protocol" "imps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
#DisplaySize 280 210 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "SyncMaster"
# Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Unknow"
HorizSync 30 - 54
VertRefresh 50 - 120
# Option "DPMS"
EndSection

Section "Monitor"
#DisplaySize 280 210 # mm
Identifier "Monitor2"
VendorName "SAM"
ModelName "SyncMaster"
# Option "DPMS"
EndSection

Section "Device"

### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
Option "UseInt10Module" "on"
Identifier "Card0"
# Driver "nv"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "pci:1:0:0"
EndSection

Section "Device"
Option "UseInt10Module" "on"
Identifier "Card1"
Driver "nvidia"
BusID "pci:0:12:0"
EndSection

Section "Device"
Option "UseInt10Module" "on"
Identifier "Card2"
Driver "nvidia"
BusID "pci:0:13:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 24
modes "1024x768"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultColorDepth 24
SubSection "Display"
Depth 24
modes "1024x768"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen2"
Device "Card2"
Monitor "Monitor2"
DefaultColorDepth 24
SubSection "Display"
Depth 24
modes "1024x768"
EndSubSection
EndSection

thanks in advance
dni77