|09-24-04, 01:38 PM||#1|
Join Date: Sep 2004
NFORCE 3 burning problems
I've experienced issues with the kernel 2.6.7-2 running on a K8NS (NFORCE 3 based card).
Noway I have been able to let it work properly, despite I have used Linux for 4 years.
So, writing | grep hd
it recognizes these devices
hdc = DVD burner
hdd = DVD reader
When I run the command line "cdrecord dev=ATAPI: --scanbus", it says that it sees something on 2,2,2, but it can't uses the device as it misses the support for that mode (then it means it has to use a non ATAPI mode).
So the matter is that it doesn't recognizes the devices like ATAPI.
Whether I use the module ide-cd instead of ide-scsi, cdrecord recognizes only the dvd-reader, likely because it's connected to the channel IDE 0 and it's the master device.
So all this let me think to a Kernel bug.
Infact,with the mobo K8V SE Deluxe the two devices used to work correctly with both them, whether with the module ide-cd or with its precursor.
Since I wanted to have a major proof, I tryed Knoppix live-CD and I found out that cdrecord doesn't work there either.
I hope you can help me someway and sorry for my English mistakes since I'm from Italy.
Last edited by Herumor; 09-25-04 at 04:23 AM.
|Thread||Thread Starter||Forum||Replies||Last Post|
|nForce + RedHat 7.3 Success Story||rtz||NVIDIA Linux||47||02-15-03 03:20 AM|
|Nforce AGP & unreal 2003||nichos||NVIDIA Linux||1||10-18-02 06:21 PM|
|Keep K7S5A or Upgrade To Nforce MB?||Grechie||CPUs, Motherboards And Memory||5||10-06-02 03:28 PM|
|Leadtek Nforce problems||druga runda||CPUs, Motherboards And Memory||4||09-18-02 09:26 AM|
|Newby question about nforce....||superconti||NVIDIA Linux||2||09-08-02 12:46 AM|