Go Back   nV News Forums > Graphics Card Forums > NVIDIA Legacy Graphics Cards

Newegg Daily Deals

Reply
 
Thread Tools
Old 01-05-05, 11:27 AM   #1
gtseng
Registered User
 
Join Date: Dec 2004
Posts: 2
Default GeForce 440 MX Problems with Newest Drivers

Hi, I just thought I would keep everyone in the loop with the response I got from nVidia below and see if anyone had any ideas on how to get either the old drivers to be recognized by MCE 2005 as being valid video drivers (I assume MCE is checking the version I had 41 and that's why it's saying the video drivers are "incompatible") or access the Advanced Timing page somehow?

I have tried PowerStrip, but they have also said it's got to be allowed in the driver first.

--Thanks, G

>>Please read from bottom up...<<

Recently you requested personal assistance from our on-line support center. Below is a summary of your request and our response.

Please do not respond via email as it will not be received.

If this issue is not resolved to your satisfaction, please click on the link below.





To update this question click on this link.


Subject
I have a Sony SDM-P232W 23" LCD Screen connected to a GeForce4 MX 440 with AG...

Discussion Thread
Response (MG) 01/05/2005 01:10 AM
It is a 41.xx driver (a driver which was never released). Any driver version after 41.09 should experience the same problem. Any dual DVI Geforce based graphics card will feature one DVI port driven by an external DVI transmitter. A QuadroFX 1000 and higher will also feature external TMDS transmitter by Silicon Image.
Customer 01/04/2005 12:16 PM
Thank you! That actually answers a lot of the other questions. I have two questions:

1. Do you know at what version the drivers were fixed?

2. Which series of graphics cards feature the external TMDS transmitter chip.

BTW, I noted in one of the Answers that support for the internal chip would be supported at some point. Are there beta drivers available and can I be placed on a mailing list?

I appreciate the responsiveness of your support. I have owned cards based on technology from many companies before (including those as far back as from Tseng labs [no relation]), and my experience with nVidia-based products have been extremely positive up to this point.
Response (MG) 01/04/2005 11:09 AM
Thank you for your email. On some older drivers, we did not correctly meet the specifications for DVI compliance. The older drivers would allow the DVI output to run out of speciification which is why you may have been able to "overclock" the TMDS transmitter on your Geforce4 MX card to operate at higher DVI resolutions. Only graphic cards which feature a Silicone Image external TMDS transmitter chip on the card can officially support the 1920x1200 resolution digitally.
Auto-Response 12/30/2004 09:55 PM
Title: Linux - Configuring Twinview
Link: http://nvidia.custhelp.com/cgi-bin/n...ted=1101836633

Title: How do I setup my NVIDIA based card to work with my Plasma or LCD HDTV?
Link: http://nvidia.custhelp.com/cgi-bin/n...ted=1096923831

Title: Why is my AGP video card incorrectly showing up as a PCI device/Mode?
Link: http://nvidia.custhelp.com/cgi-bin/n...ted=1096401608

Title: Linux - Configuring TV-Out
Link: http://nvidia.custhelp.com/cgi-bin/n...ted=1101837165

Title: Linux - Configuring multiple x screens on one card
Link: http://nvidia.custhelp.com/cgi-bin/n...ted=1101836843



Customer 12/30/2004 09:55 PM
I have a Sony SDM-P232W 23" LCD Screen connected to a GeForce4 MX 440 with AGP8X via DVI-D. Before I installed the 66.93 drivers, which is now required by Windows Media Center Edition 2005, I was able to set the resolution to 1920 x 1200 (the native resolution of the LCD). However, now, my GeForce4 card will not recognize the monitor with this resolution! Instead, it says that my LCD only goes up to 1600 X 1200. When I add the custom mode of 1920 X 1200, the card will simply create a desktop of 1920 X 1200, but still output a signal of 1600 X 1200. In this mode, the video card pans the screen. I have enclosed a setting of the "detected" screen resolution, which is obviously wrong. I have the latest nForce drivers, as well as the latest updates to my motherboard (Abit NF7-S rev. 1.1). Please help. I have tried all suggestions and reinstalled (uninstalled, rebooted, then installed, in all sorts of ways) all the drivers, including my Sony LCD drivers. When I go back to my old drivers (41.09), I can set my resolution to 1920 X 1200. Please help. I have not been able to find anything online or in the user guide that addresses this issue.

Question Reference #041230-000050
Escalation Level: 4 hours
Product: Graphics cards
Category: Troubleshooting
Date Created: 12/30/2004 09:55 PM
Last Updated: 01/05/2005 01:10 AM
Status: Solved
gtseng is offline   Reply With Quote
Old 01-05-05, 11:16 PM   #2
gtseng
Registered User
 
Join Date: Dec 2004
Posts: 2
Default Re: GeForce 440 MX Problems with Newest Drivers

Solved my own problems. Got the Omega Drivers at omegadrivers.net. Simply awesome!
gtseng is offline   Reply With Quote
Old 01-07-05, 07:22 PM   #3
martyp
Registered User
 
Join Date: Jan 2005
Posts: 10
Default Re: GeForce 440 MX Problems with Newest Drivers

Hi,
This resolution issue with the MX440 card sounds like it may be similar to the issue I have with mine as below:
http://www.nvnews.net/vbulletin/showthread.php?t=43420
martyp is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
GeForce R304 Beta Drivers Get You Ready For Summer Gaming News Archived News Items 0 06-18-12 09:50 PM
Enhance Max Payne 3, Diablo III with GeForce R300 Drivers News Archived News Items 0 05-22-12 06:30 PM
Geforce 440 Go, SuSE 8.0, and new Nvidia drivers loudawg NVIDIA Linux 4 06-01-04 12:54 AM
Radeon 9700 not all that? sancheuz Other Desktop Graphics Cards 200 10-12-02 09:31 PM
Debian Woody 3.0r0 and Problems with Geforce drivers vogt NVIDIA Linux 3 09-09-02 02:07 PM

All times are GMT -5. The time now is 08:51 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.