Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 01-10-05, 06:30 AM   #1
webmyster
Registered User
 
Join Date: Mar 2004
Posts: 1
Default 2 cards + TwinView + Stereo + 1.0-6629

Hello,
I have a dual-Xeon computer under Redhat 9.0 with a Quadro FX 3000G, and a GeForce. The drivers are 1.0-6629.

The configuration is as follow :
The quadro, plugged in the AGP slot has twinview and stereo enabled manages :0.0.
The GeForce, plugged in a PCI bus, only manage one display device without Stereo manages :0.1.

In the attachement, you will find the XF86Config file.

The problem is :
I don't have any stereo on the above display device. ie : It seems, there is no stereo buffer at all.

I think it's a bug in the driver as it works fine with drivers 1.0-6111.
Attached Files
File Type: txt XF86Config.txt (2.3 KB, 126 views)
webmyster is offline   Reply With Quote
Old 01-10-05, 07:09 AM   #2
Thunderbird
 
Join Date: Jul 2002
Location: Netherlands, Europe
Posts: 2,105
Default Re: 2 cards + TwinView + Stereo + 1.0-6629

Did you already check your X log file? Likely the driver gives a reason for not enabling Stereo on the quadro card. I'm not sure if the drivers like to enable stereo because the geforce is in the same X session. Does stereo work fine if you disable the geforce in the config file?
Thunderbird is offline   Reply With Quote
Old 01-12-05, 12:46 PM   #3
stayrook
Registered User
 
Join Date: May 2004
Posts: 4
Default Re: 2 cards + TwinView + Stereo + 1.0-6629

I have a similar problem with the 6629 driver, although, I am running a single Quadro4 980XGL graphics card. It seem that blue-line stereo no longer works with this driver. My emitter won't light up. However, if I switch to mode 3 the emitter will light up, but of course, I can't use that mode with my setup. Below is a section of my xorg.log file. Any suggestions will be appreciated.

(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "Stereo" "2"
(**) NVIDIA(0): Option "IgnoreEDID" "0"
(**) NVIDIA(0): Option "UseEdidFreqs" "0"
(**) NVIDIA(0): Blue line stereo requested
(--) NVIDIA(0): Linear framebuffer at 0xE8000000
(--) NVIDIA(0): MMIO registers at 0xFD000000
(II) NVIDIA(0): NVIDIA GPU detected as: Quadro4 980 XGL
(--) NVIDIA(0): VideoBIOS: 04.28.20.19.15
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): VideoRAM: 131072 kBytes
stayrook is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
_which_ quadro cards have stereo support under driver 3123 codingfrenzy NVIDIA Linux 3 12-29-02 03:24 PM

All times are GMT -5. The time now is 05:54 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.