Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 12-10-02, 08:56 PM   #1
=Super_n00b=
Registered User
 
=Super_n00b='s Avatar
 
Join Date: Dec 2002
Location: Sydney
Posts: 26
Unhappy mandrake 9 Nvidia driver Install

Can i please get some HELP ?

Im very new to mandrake/Linux. Im using Mandrake 9, Can someone please help me to install nvidia Drivers onto my system i have an AMD 2000+XP, 512 meg DDR, Abit Kg-7 mobo and GeForce 4 Ti4600. i have read Tons of Tech Forum posts but i need a Learners guide "10 years of windows use" if anyone would be kind enough to help

When i tried to install the tar.gz i get this error

"You appear to be compiling the NVdriver kernel module with
a compiler different from the one that was used to compile
the running kernel. This may be perfectly fine, but there
are cases where this can lead to unexpected behaviour and
system crashes.

If you know what you are doing and want to override this
check, you can do so by setting IGNORE_CC_MISMATCH.

In any other case, set the CC environment variable to the
name of the compiler that was used to compile the kernel.

*** Failed cc sanity check. Bailing out! ***
make: *** [gcc-check] Error 1"

Thanks

Super.

Last edited by =Super_n00b=; 12-11-02 at 03:07 AM.
=Super_n00b= is offline   Reply With Quote
Old 12-11-02, 06:38 AM   #2
bwkaz
Registered User
 
Join Date: Sep 2002
Posts: 2,262
Default

What do cat /proc/version, echo $CC, $CC -v, and cc -v tell you?

You probably need to install a compiler (in which case this is not a very good error message -- but it is possible that that's what happened anyway), but seeing what these print (if anything -- the echo $CC one might not do anything, in which case the $CC -v isn't useful) will confirm or deny that.
__________________
Registered Linux User #219692
bwkaz is offline   Reply With Quote
Old 12-11-02, 08:03 AM   #3
=Super_n00b=
Registered User
 
=Super_n00b='s Avatar
 
Join Date: Dec 2002
Location: Sydney
Posts: 26
Default

Only thing i get is this ....


"[root@LinuXTesT craig]# cat /proc/version
Linux version 2.4.19-16mdk (quintela@bi.mandrakesoft.com) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002 ?
=Super_n00b= is offline   Reply With Quote
Old 12-11-02, 11:42 AM   #4
bwkaz
Registered User
 
Join Date: Sep 2002
Posts: 2,262
Default

What about cc -v? Something about command not found?

Something will be printed -- what?
__________________
Registered Linux User #219692
bwkaz is offline   Reply With Quote
Old 12-11-02, 07:21 PM   #5
=Super_n00b=
Registered User
 
=Super_n00b='s Avatar
 
Join Date: Dec 2002
Location: Sydney
Posts: 26
Default

yep cc -v command not found
=Super_n00b= is offline   Reply With Quote
Old 12-11-02, 07:39 PM   #6
=Super_n00b=
Registered User
 
=Super_n00b='s Avatar
 
Join Date: Dec 2002
Location: Sydney
Posts: 26
Default

i have also tried the new nvidia drivers this morning and i still get the same error
=Super_n00b= is offline   Reply With Quote
Old 12-11-02, 08:01 PM   #7
Andy Mecham
l33t master
 
Join Date: Jul 2002
Location: Santa Clara, CA
Posts: 1,163
Default

'cc -v: command not found' indicates that you don't have 'cc' (a compiler) installed. To rebuild the drivers, you'll need to have development tools (compiler, linker, etc) installed.

If you're using a stock install of Mandrake 9.0, you shouldn't need to use the SRPM or source tarball packages - you should be able to use the binary RPMs. Please visit http://www.nvidia.com/view.asp?IO=li..._ia32_1.0-4191 and download NVchooser.sh (see STEP 3). It will tell you which files to download and install. Also, make sure you have a copy of the README available for reference.

--andy
__________________
Andy Mecham
NVIDIA Corporation
Andy Mecham is offline   Reply With Quote
Old 12-11-02, 09:32 PM   #8
bwkaz
Registered User
 
Join Date: Sep 2002
Posts: 2,262
Default

Yeah, what Andy has posted would be the first thing to do.

If for some reason you want 3123, or if you want to compile from source for some other reason, then you can put in your Mandrake CD 1, reboot to the Mandrake installer, go through it but make sure you select upgrade instead of install when asked, select "development" on the first package selection screen, and let it continue on through where it copies files, and then exit it, you should get a compiler installed. After that's done, make sure CD 1 isn't in the drive, and reboot back to Linux. Then retry the cc -v, and you should get "gcc version 3.2" printed.

If you do, then restart the nVidia drivers. However, as I said earlier, the binary RPMs for 4191 should work if you would rather go that route.
__________________
Registered Linux User #219692
bwkaz is offline   Reply With Quote

Old 12-11-02, 10:02 PM   #9
=Super_n00b=
Registered User
 
=Super_n00b='s Avatar
 
Join Date: Dec 2002
Location: Sydney
Posts: 26
Default

ok ill give the RPM's a try..Just that last time i used the RPM it died
OK i have now loaded the New Nvidis RPM's and edited the XF86Config-4 like the Destructions said time to reboot X
Stay tuned and thank you eveyone for being so helpfull.

Cheers.

Last edited by =Super_n00b=; 12-11-02 at 10:34 PM.
=Super_n00b= is offline   Reply With Quote
Old 12-11-02, 11:05 PM   #10
=Super_n00b=
Registered User
 
=Super_n00b='s Avatar
 
Join Date: Dec 2002
Location: Sydney
Posts: 26
Talking

WOOOOOOHOOOOOOOOOO

5338 FPS in GLXGEARS You guys ROCK.. Thank you Sooo much for all the help!
It didnt all go super smooth but i figured the last bit out.. I ran the NVIDIA_GLX-1.0-4191.src.rpm the first time oops but i just updated it to the i386 and X booted and its going tops.. Again THANK YOU SO MUCH !

Cheers

P.S. -- now where is a good place to Download Good 3D Games ?????

Last edited by =Super_n00b=; 12-12-02 at 02:43 AM.
=Super_n00b= is offline   Reply With Quote
Old 12-15-02, 05:56 AM   #11
=Super_n00b=
Registered User
 
=Super_n00b='s Avatar
 
Join Date: Dec 2002
Location: Sydney
Posts: 26
Unhappy

Ok Guys .. More bad news.. After the last week of play'n with everuthing in Mandrake i decided to start from scratch now i have a better understanding and re-install so i could setup just how i wanted to ..
OOPS bad move i say .. Now when im installing the 4191 Nvidia Drivers(Same ones as i used Last time) im getting this "error: failed dependencies: kernel = 2.4.8-26mdk is needed" But in my Control Center i have 2.4.19-16mdk Ummm Any ideas ?

Thanks

Super
=Super_n00b= is offline   Reply With Quote
Old 12-15-02, 06:26 AM   #12
Exner
Registered User
 
Exner's Avatar
 
Join Date: Dec 2002
Posts: 16
Default

Quote:
Originally posted by =Super_n00b=
OOPS bad move i say .. Now when im installing the 4191 Nvidia Drivers(Same ones as i used Last time) im getting this "error: failed dependencies: kernel = 2.4.8-26mdk is needed" But in my Control Center i have 2.4.19-16mdk Ummm Any ideas ?
Sounds like you've installed Mandrake 8.2 instead of Mandrake 9.0. Try the NVIDIA_kernel RPM for Mandrake 8.2.
__________________
- Exner (Antony Suter)
Exner is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Help Installing NVIDIA Tesla M2070Q in Linux RHEL5 Ferianto85 NVIDIA Linux 0 05-18-12 08:35 PM
Getting the proprietary nvidia driver to run with Debian 3.0 r0 (woody) Katchina404 NVIDIA Linux 9 01-12-03 08:49 AM
nvidia + 2.4.19 gentoo = messed up ulukay NVIDIA Linux 18 11-01-02 11:58 PM
Red Hat null(limbo beta 3), guide to install Nvidia Drivers utiel NVIDIA Linux 21 09-30-02 05:32 PM
NVIDIA driver doesn't install successfully on RH 7.3 Sunni NVIDIA Linux 3 08-28-02 02:30 PM

All times are GMT -5. The time now is 09:37 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.