Twinview - TV out problem

[geezer]

I've set up twinview with my TV cloning CRT on GF4 MX420 but dont get any output at all to TV. I can't see any error in the xorg log file about it - just seems to be working according to that.

Don't know much about setting up my xorg.conf file. Do I need section for my TV as well? Nvidia readme doesnt go into that much, but these are the settings from my xorg.conf:

Section "Monitor"
DisplaySize	  320   240	# mm
Identifier   "Monitor0"
VendorName   "HSL"
ModelName    "720E"
HorizSync    30.0 - 72.0
VertRefresh  50 - 160 
Option	    "DPMS"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option     "SWcursor"           	# [<bool>]
Option      "RenderAccel" "true"
Option      "HWcursor"           	# [<bool>]
Option      "CursorShadow" "true"
#Option     "NoAccel"            	# [<bool>]
#Option     "ShadowFB"           	# [<bool>]
#Option     "UseFBDev"           	# [<bool>]
#Option     "Rotate"             	# [<str>]
#Option     "VideoKey"           	# <i>
#Option     "FlatPanel"          	# [<bool>]
#Option     "FPDither"           	# [<bool>]
#Option     "CrtcNumber"         	# <i>
Identifier  "Card0"
Driver      "nvidia"
VendorName  "nVidia Corporation"
BoardName   "NV17 [GeForce4 MX 420]"
BusID       "PCI:1:0:0"
Option      "NvAgp" "1"
Option      "NoLogo" "True"
Option      "TwinView" "True"
Option      "ConnectedMonitor" "CRT,TV"
Option      "MetaModes" "1280x960,800x600;1024x768,800x600"
Option      "TwinViewOrientation" "Clone"
Option      "SecondMonitorHorizSync" "30 - 50"
Option      "SecondMonitorVertRefresh" "60"
Option      "TVStandard" "PAL-I"
Option      "TVOutFormat" "COMPOSITE"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Card0"
Monitor    "Monitor0"
DefaultDepth 24
Option     "Accel"
SubSection "Display"
Viewport   0 0
Depth     1
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     4
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     8
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     15
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     16
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     24
Modes     "1280x960" "1024x768"
EndSubSection
EndSection

I've also just found out that AGP is disabled, from /proc/driver/nvidia/agp/status

Can't see any error in dmesg tho. Could these 2 things be related?

[mglorena]

I also had a problem with TV OUT and
solves it writing Option "TwinView" "on"
not "True"
not "1"

[geezer]

Didn't work for me

[geezer]

Well now Ive got AGP working but still no TV out

Anyone got anymore suggestions or this one more reason I still need winders?