Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 01-16-03, 01:49 PM   #1
BigFish
Registered User
 
Join Date: Jan 2003
Posts: 3
Default TwinView monitors reversed

I'm pretty much a newbie to working with linux yet i've been able to finally get my twinview display to work at 90%... with one issue. My monitors are reversed and I need to swap them. Yes, yes, I could just swap the connectors on the back of the computer but then when i dual boot back into XP i'd have the same situation. Could anyone tell me how to swap the monitors in the XF86Config-4? Here are my current settings:

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-96
VertRefresh 48-160
Option "dpms"

# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Device"
# no known options
Identifier "NVIDIA GeForce 4 (generic)"
Driver "nvidia"
VendorName "NVIDIA GeForce 4 (generic)"
BoardName "NVIDIA GeForce 4 (generic)"

#BusID
EndSection

Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 4 (generic)"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView"
Option "SecondMonitorHorizSync" "30-96"
Option "SecondMonitorVertRefresh" "48-160"

Option "MetaModes" "1280x1024,1280x1024"
Option "ConnectedMonitor" "CRT,CRT"
Subsection "Display"
Depth 24
Modes "1600x1200" "1400x1050" "1280x1024"
"1152x864" "1024x768" "800x600" "640x480"
EndSubsection

EndSection

Section "DRI"
Mode 0666
EndSection
BigFish is offline   Reply With Quote
Old 01-21-03, 11:50 AM   #2
Camay
Registered User
 
Join Date: Jan 2003
Posts: 3
Default

same problem here and I see that every post for this problem on this forum have no reply.

Does someone can explain to us why to reorder secondary monitor as SECONDARY monitor and get back primary as primary ????

I've tryed both TwinView and Section "R" in the readme...

view this topic related to my problem (the second reply)

http://www.nvnews.net/vbulletin/show...ew+OR+twinview

Last edited by Camay; 01-21-03 at 12:52 PM.
Camay is offline   Reply With Quote
Old 01-22-03, 12:25 AM   #3
qjm
Registered User
 
Join Date: Dec 2002
Posts: 4
Default

Search for "LeftOf" in the readme.
Q.
qjm is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Nvidia Quadro 420 and dual 30" monitors quickSTi NVIDIA Linux 2 06-20-12 01:04 PM
Problems with configuring monitors and keeping them disabled with 302.17 Erosmith NVIDIA Linux 2 06-20-12 01:10 AM
First monitor is black when going to virtual console, when using twinView zeBarbu NVIDIA Linux 2 09-07-03 10:35 PM
XF86Config for a Quadro4 without TwinView? Twirlip NVIDIA Linux 1 10-09-02 11:36 AM
How do I configure TwinView on Dell Inspiron rutgerclaes NVIDIA Linux 6 08-01-02 04:20 AM

All times are GMT -5. The time now is 09:29 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.