|02-03-06, 08:48 PM||#1|
Join Date: Dec 2005
FX5200 TV Out Problems
Hey all - I would appreciate your help on this one. I just bought an FX5200 to use as the video card for a media center PC. However, there is one thing I cannot figure out. Here is the situation:
I have a TV without S-Video so I am using an S-Video to Composite converter. This same cable and converter worked with a Geforce4 MX400 that was once connected to this computer. However, when I use the 5200, I see rolling horizontal bars on the TV and the image is in black and white.
I brought the computer over to a TV with S-Video, and the image was fine but still in black and white.
I then connected the computer to a standard VGA monitor, and it worked perfectly fine (colors and all, stable image). So I must ask, what is up?
This seems to be operating system independent since all of this happens before I get to the bootloader for either Windows or Linux (I have tried both to no avail).
I am hoping someone can help.
Thanks in advance,
|02-04-06, 04:19 AM||#2|
Join Date: Jul 2004
Re: FX5200 TV Out Problems
I think yer S-Video cable is dodgy and only transmits the brightness infromation instead of both brightness (luminance) and chrominance.
You can force a composite signal over S-Video.
To do this bring up the nVidia applet and go to device settings for your TV as shown here
and then change the TV output type to composite instead instead of S-Video or Auto as shown here:
Hopefully that should give you a colour signal over S-Video.
|Thread||Thread Starter||Forum||Replies||Last Post|
|problems with drivers after 295.40 (OpenSuSE 12.1, GeFroce 7900 GS, Phenom II X4)||alawa||NVIDIA Linux||0||06-09-12 06:37 PM|
|Nvidia Problems in Slackware 8.1||xtreme||NVIDIA Linux||3||10-01-02 12:03 PM|
|F1 2002 problems with driver 40.41||arutten||NVIDIA Windows Graphics Drivers||6||10-01-02 07:07 AM|
|Leadtek Nforce problems||druga runda||CPUs, Motherboards And Memory||4||09-18-02 08:26 AM|
|DirectX 8 problems with GeForce4||Derwin||NVIDIA GeForce 7, 8, And 9 Series||19||08-20-02 01:23 AM|