|06-09-06, 09:42 PM||#1|
Join Date: Jun 2006
S2891 Linux Sata installation
Gosh, I thought this problem was solved with the latest Linux kernel in Fedora Core 5!
Firstly some system configs:
TYAN S2891 (K8SRE) mobo
2x Opteron 250 2.4 Ghz
2x 1G RAM (1G per CPU) - Total 2G
1x NVidia NProfessional 2200 MCP (Sata Controller)
4x SATA2 Western Digital WD800JD 80Gb -Total 300Gb
BIOS 2.01.2891 (Release Date: 09/28/05)
O/S install media:
Fedora Core 5 x86_64 DVD
This is new Linux installation on 'straight-out-of-a-box' hardware. Bootup is fine. All system components recognised, especially the 4 SATA drives. I've tried various combinations of the follwoting options to get the Linux installation going, but all ended up with the same problem - the system hangs (black screen with cursor cross) after Anaconda starts installation:
BIOS Main: O/S Installed [Linux]/[Other]
NV Raid Configuration: [Disabled]
MTRR Mapping: [Discreet] - Onscreen help says that Linux O/S may need this setting - not sure what this does.
Enable ACPI: [No]
Interrupt Mode: [APIC]/[PIC]
I've also passed the following commands at boot time:
Boot: linux acpi=off nnoapic nolapic noprobe
The problem looks like an old one with the sata_nv driver causing a kernel panic. When I do not install the driver (using noprobe) Anaconda travels a little further but falls over when no hardrives are detected (as you would expect). This leads me to believe that the problem lies with the sata_nv driver and the kernel. I've researched this and I was under the impression that the kernel fix would have been included in Fedora Core 5.
Any suggestions / help to get around this. Perhaps another Linux distro that works with the above setup?
|07-19-06, 03:42 AM||#2|
Join Date: Jun 2006
Re: S2891 Linux Sata installation
Just thought I'ld close the loop for those that may have had the same experience. I finally got Linux to install without any problems using SuSe 10.0. I used Tyan Support's advice and used a commercial distribution that they support. After 3 weeks of solid searching and trying, it's a pity that I'm no closer to understanding what or why I had problems with FC 5.
|Thread||Thread Starter||Forum||Replies||Last Post|
|302.11 (beta) for Linux x86/x86_64 released||AaronP||NVIDIA Linux||0||05-19-12 10:21 AM|
|nVidia Linux drivers with Linux on Mac, help?||Thetargos||NVIDIA Linux||0||05-13-12 12:52 PM|
|Mandrake Linux 9.0 (Dolphin) now available | comments?||volt||General Linux||10||10-19-02 10:13 PM|
|Linux VS. Windows XP! XP wins!||dostler||NVIDIA Linux||20||09-15-02 03:47 PM|
|download problem with linux NVIDIA driver packages||Timo||NVIDIA Linux||7||07-31-02 09:22 AM|