|08-14-06, 05:53 PM||#1|
Join Date: Aug 2006
Suspend to RAM (S3) resume problem
I tried to use Suspend to RAM with my FX5500 board. But got problems.
1. Not starting X-server. just load nvidia.ko. Suspend works. Resume almost works, but monitor don't leave powersave mode.
2. Start X-server, but switch to text console. Suspend works, resume works, monitor turned on, but text console can't scroll (just can do anything, but scrolling after reaching last line don't work. For example can't see dmesg output.. See only first lines). If i try to switch to X-server after resuming, i got just black screen. Switching back to text console works, but screen will be black too.
3. Like above, but don't switch back to Graphic session, just restart X server - works.
3. Start X-Server and suspend from X session. Suspend works, resume works, but monitor turned off, but got black screen like above.
PS. here are last lines of one of XOrg.log after resuming:
(WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x00000ebc, 0x00000ecc, 0)
(WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x00000ebc, 0x00000ecc, 0)
(II) NVIDIA(0): Setting mode "1152x864_85"
|Thread||Thread Starter||Forum||Replies||Last Post|
|302.07 no resume from suspend||stecklum||NVIDIA Linux||85||12-07-12 01:27 PM|
|[Bug Report] Xid error after resume with 307.02, and compiz stops working.||John K.||NVIDIA Linux||0||05-09-12 02:42 PM|
|Problem with APM/NVdriver/Mandrake 9.0||acid_zebra||NVIDIA Linux||3||10-25-02 05:35 PM|
|nv30 problem rumor||bob747b||Rumor Mill||37||10-10-02 03:14 PM|
|Nvidia Go on laptop, black border within XFree86 problem||raxip||NVIDIA Linux||3||07-31-02 10:58 AM|