Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 08-13-06, 08:25 AM   #1
Lumbermatt
Registered User
 
Join Date: Aug 2006
Posts: 2
Default Problems with TwinView on Ubuntu

Hi,

I'm trying to install a TwinView system on my Ubuntu Linux 6.06 LTS. my GPU is a GeForce 6800 and the monitors are both 20" Samsung syncmaster 20GLsi.
The direct rendering works fine.
The TwinView worked twice, but then after a reboot it failed again. The nvidia logo wasn't split over both screens but it just showed up on one monitor.
Both monitors are well detected and the TwinView is activated. The nvidia driver show two available monitors (CRT-0 and CRT-1). But X only starts on one of them.

Here's a copy of the Xorg log

Here's a copy of my xorg.conf

Does anybody have a clue of what's wrong?

EDIT : After many tried it seems that the problem is located here :

Code:
(**) NVIDIA(0): TwinView enabled
(WW) NVIDIA(0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce 6800 at PCI:1:0:0
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.40.02.12.01
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6800 at PCI:1:0:0:
(--) NVIDIA(0):     CRT-0
(--) NVIDIA(0):     Samsung (CRT-1)
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(0): Samsung (CRT-1): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1600x1200,1600x1200"
(II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0):     from EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
Even if the nvidia driver detect 2 monitors and validate 1600x1200,1600x1200 (so virtualy 3200x1200), the virtual screen choosen is only 1600x1200

Last edited by Lumbermatt; 08-13-06 at 09:21 AM.
Lumbermatt is offline   Reply With Quote
Old 08-13-06, 10:20 AM   #2
Lumbermatt
Registered User
 
Join Date: Aug 2006
Posts: 2
Default Re: Problems with TwinView on Ubuntu

I've solved the problem myself by disabling the EDID reads from the monitors. In fact one of the two monitors was sending bad information so that it was impossible to have a resolution higher than 1024 in height.
Lumbermatt is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems with configuring monitors and keeping them disabled with 302.17 Erosmith NVIDIA Linux 2 06-20-12 12:10 AM
Linux gaming on the rise: EA arrives on Ubuntu and Valve plans Steam port News Gaming Headlines 0 06-15-12 04:20 PM
Unity 5.12 Fixes Ubuntu OpenGL Performance Problems News Latest Tech And Game Headlines 0 06-11-12 01:20 PM
Precision and purpose: Ubuntu 12.04 and the Unity HUD reviewed News Latest Tech And Game Headlines 0 05-28-12 02:20 PM
TwinView problems k-rulez NVIDIA Linux 1 09-07-02 09:13 AM

All times are GMT -5. The time now is 11:07 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.