Suse 10.1 and Refreshrates > 85 Hz

Hugo# · 09-12-06, 09:34 PM

I use suse 10.1 and driver 87.74. Everything is ok. I´m just in real trouble with v-refresh rates.

All i get is a max. of 85 Hz - if i try to force it by setting the monitor refresh rate to 90-150 (or any other value > 85), resolution went back to 1024 and nice 60 Hz...

Till now, i´ve tried Monitor (Vesa and non-Vesa-Modes), refresh-rate per monitor (min/max v-frequ.) and refresh-rate per v-refresh of gfx-card-options
Tried it with and without ddc/edid... many resolutions...

It´s just locked to a max. of 85 Hz, which is not usable with a crt....

my crt can handle horizontal 110 kHz and vertical 160...

netllama · 09-12-06, 09:39 PM

Please start X with the following command:
startx -- -logverbose 6

and then generate and post an nvidia-bug-report.log

Thanks,
Lonni

Hugo# · 09-13-06, 08:24 PM

my log

netllama · 09-13-06, 09:13 PM

According to the bug report, the EDID for your CRT isn't being detected, which means that the driver is falling back to safe defaults for everything:
(--) NVIDIA(0): --- EDID for CRT-1 ---
(--) NVIDIA(0):
(--) NVIDIA(0): No EDID Available.
(--) NVIDIA(0):
(--) NVIDIA(0): --- End of EDID for CRT-1 ---

Is your CRT connected directly to the videocard with no intermediary devices or adapters? If so, then your only solution is to generate a modeline for the mode you wish to use.

Thanks,
Lonni

Hugo# · 09-13-06, 09:59 PM

It´s connected via dvi-adapter and y-cable for shutter-glasses (revelator).
It wasn´t a problem with m$-systems, but you gave me the right tip.
I got it now with modeline

thx for fast & good support!

09-12-06, 09:34 PM	#1
Hugo# Registered User Join Date: Sep 2006 Posts: 7	Suse 10.1 and Refreshrates > 85 Hz I use suse 10.1 and driver 87.74. Everything is ok. I´m just in real trouble with v-refresh rates. All i get is a max. of 85 Hz - if i try to force it by setting the monitor refresh rate to 90-150 (or any other value > 85), resolution went back to 1024 and nice 60 Hz... Till now, i´ve tried Monitor (Vesa and non-Vesa-Modes), refresh-rate per monitor (min/max v-frequ.) and refresh-rate per v-refresh of gfx-card-options Tried it with and without ddc/edid... many resolutions... It´s just locked to a max. of 85 Hz, which is not usable with a crt.... my crt can handle horizontal 110 kHz and vertical 160...

09-12-06, 09:39 PM	#2
netllama NVIDIA Corporation Join Date: Dec 2004 Posts: 8,763	Re: Suse 10.1 and Refreshrates > 85 Hz Please start X with the following command: startx -- -logverbose 6 and then generate and post an nvidia-bug-report.log Thanks, Lonni

09-13-06, 09:13 PM	#4
netllama NVIDIA Corporation Join Date: Dec 2004 Posts: 8,763	Re: Suse 10.1 and Refreshrates > 85 Hz According to the bug report, the EDID for your CRT isn't being detected, which means that the driver is falling back to safe defaults for everything: (--) NVIDIA(0): --- EDID for CRT-1 --- (--) NVIDIA(0): (--) NVIDIA(0): No EDID Available. (--) NVIDIA(0): (--) NVIDIA(0): --- End of EDID for CRT-1 --- Is your CRT connected directly to the videocard with no intermediary devices or adapters? If so, then your only solution is to generate a modeline for the mode you wish to use. Thanks, Lonni

09-13-06, 09:59 PM	#5
Hugo# Registered User Join Date: Sep 2006 Posts: 7	Re: Suse 10.1 and Refreshrates > 85 Hz It´s connected via dvi-adapter and y-cable for shutter-glasses (revelator). It wasn´t a problem with m$-systems, but you gave me the right tip. I got it now with modeline thx for fast & good support!