Go Back   nV News Forums > Linux Support Forums > NVIDIA FreeBSD

Newegg Daily Deals

Reply
 
Thread Tools
Old 09-12-06, 05:50 PM   #1
growe
Registered User
 
Join Date: Sep 2006
Posts: 3
Default Asus P5B Instant Crash

Greetings,
Well someone has to be on the FreeBSD Desktop cutting edge I guess...

FreeBSD 6.1 Stable I386
Asus P5B Deluxe mother board/ 4GB memory
Asus EN7600GS Silent HTD/512 MB PCI-E
NVIDIA Drivers 1.0-8774 built from /ports
compat5x-i386-5.4.0.8_7

System is fine until I try and start X. It then immediately reboots so fast that there is no time for it to log anything in the Xorg logs. They are just zero length.

more /boot/loader.conf
nvidia_load="YES"
linux_load="YES"


pciconf -lv
hostb0@pci0:0:0: class=0x060000 card=0x81ea1043 chip=0x29a08086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000088 chip=0x29a18086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
uhci0@pci0:26:0: class=0x0c0300 card=0x81ec1043 chip=0x28348086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci1@pci0:26:1: class=0x0c0300 card=0x81ec1043 chip=0x28358086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
ehci0@pci0:26:7: class=0x0c0320 card=0x81ec1043 chip=0x283a8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
none0@pci0:27:0: class=0x040300 card=0x81ec1043 chip=0x284b8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = multimedia
pcib2@pci0:28:0: class=0x060400 card=0x00000040 chip=0x283f8086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib3@pci0:28:4: class=0x060400 card=0x00000040 chip=0x28478086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib4@pci0:28:5: class=0x060400 card=0x00000040 chip=0x28498086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
uhci2@pci0:29:0: class=0x0c0300 card=0x81ec1043 chip=0x28308086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci3@pci0:29:1: class=0x0c0300 card=0x81ec1043 chip=0x28318086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
uhci4@pci0:29:2: class=0x0c0300 card=0x81ec1043 chip=0x28328086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
ehci1@pci0:29:7: class=0x0c0320 card=0x81ec1043 chip=0x28368086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
pcib5@pci0:30:0: class=0x060401 card=0x00000050 chip=0x244e8086 rev=0xf2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x81ec1043 chip=0x28108086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-ISA
atapci1@pci0:31:2: class=0x010601 card=0x81ec1043 chip=0x28218086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
none1@pci0:31:3: class=0x0c0500 card=0x81ec1043 chip=0x283e8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = SMBus
nvidia0@pci1:0:0: class=0x030000 card=0x81f61043 chip=0x039210de rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
class = display
subclass = VGA
atapci0@pci3:0:0: class=0x010185 card=0x81e41043 chip=0x2363197b rev=0x02 hdr=0x00
class = mass storage
subclass = ATA
none2@pci2:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
class = network
subclass = ethernet
fwohci0@pci5:3:0: class=0x0c0010 card=0x815b1043 chip=0x8023104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'TSB43AB22/A IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr'
class = serial bus
subclass = FireWire
skc0@pci5:4:0: class=0x020000 card=0x811a1043 chip=0x432011ab rev=0x13 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = '88E8001/8003/8010 Gigabit Ethernet Controller with Integrated PHY (copper)'
class = network
subclass = ethernet


sysctl -a |grep nvidia
nvidia 73 292K - 73 16,32,64,128,256,1024,2048
hw.nvidia.version: NVIDIA FreeBSD x86 Kernel Module 1.0-8774 Tue Aug 1 22:04:23 PDT 2006
hw.nvidia.registry.EnableVia4x: 0
hw.nvidia.registry.EnableALiAGP: 0
hw.nvidia.registry.NvAGP: 1
hw.nvidia.registry.EnableAGPSBA: 0
hw.nvidia.registry.EnableAGPFW: 0
hw.nvidia.registry.SoftEDIDs: 1
hw.nvidia.registry.Mobile: 4294967295
hw.nvidia.registry.ResmanDebugLevel: 4294967295
hw.nvidia.registry.FlatPanelMode: 0
hw.nvidia.registry.DevicesConnected: 0
hw.nvidia.registry.VideoEnhancement: 0
hw.nvidia.registry.RmLogonRC: 1
hw.nvidia.registry.DetectPrimaryVga: 1
hw.nvidia.cards.0.model: GeForce 7600 GS
hw.nvidia.cards.0.irq: 16
hw.nvidia.cards.0.vbios: ??.??.??.??.??
hw.nvidia.cards.0.type: PCI-E
dev.nvidia.0.%desc: GeForce 7600 GS
dev.nvidia.0.%driver: nvidia
dev.nvidia.0.%location: slot=0 function=0
dev.nvidia.0.%pnpinfo: vendor=0x10de device=0x0392 subvendor=0x1043 subdevice=0x81f6 class=0x030000
dev.nvidia.0.%parent: pci1

dmesg Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #0: Tue Sep 12 16:37:49 EDT 2006
root@psv2.rowes.org:/usr/src/sys/i386/compile/SMP
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz (2666.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH, DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2 ,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 3153723392 (3007 MB)
avail memory = 3076481024 (2933 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 7600 GS> port 0x9c00-0x9c7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 17 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ugen0: vendor 0x0bda RTL8187_Wireless, rev 2.00/1.00, addr 2
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xfe9fe000-0xfe9fffff irq 16 at device 0.0 on pci3
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
pci2: <network, ethernet> at device 0.0 (no driver attached)
uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff000-0xfebff3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfeaff800-0xfeafffff,0xfeaf8000-0xfeafbfff irq 21 at device 3.0 on pci5
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:c8:c3:34
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:c8:c3:34
fwe0: Ethernet address: 02:11:d8:c8:c3:34
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
skc0: <Marvell Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfeaf4000-0xfeaf7fff irq 19 at device 4.0 on pci5
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:18:f3:2e:40:82
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata5: <ATA channel 0> on atapci1
ata6: <ATA channel 1> on atapci1
ata7: <ATA channel 2> on atapci1
ata8: <ATA channel 3> on atapci1
ata9: <ATA channel 4> on atapci1
ata10: <ATA channel 5> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDR <PIONEER DVD-RW DVR-K06/1.01> at ata4-slave UDMA33
ad10: 305245MB <Seagate ST3320620AS 3.AAC> at ata5-master SATA300
ad12: 305245MB <Seagate ST3320620AS 3.AAC> at ata6-master SATA300
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad10s1a
WARNING: / was not properly dismounted
WARNING: /backups was not properly dismounted
sk0: link state changed to UP

Nvidia-xconfig doesn't appear to be reading the card correctly either. Any ideas where to start debugging this in order to get at least past the instant crash and reboot ? Thanks.
growe is offline   Reply With Quote
Old 09-13-06, 04:12 PM   #2
game-master
Registered User
 
Join Date: Apr 2005
Posts: 10
Default Re: Asus P5B Instant Crash

But you are able to boot that motherboard into FreeBSD 6.1-RELEASE without failure?
game-master is offline   Reply With Quote
Old 09-13-06, 06:29 PM   #3
growe
Registered User
 
Join Date: Sep 2006
Posts: 3
Default Re: Asus P5B Instant Crash

Yep, booted fine on the latest 6.1 Stable ISO. Works great and fast as a server, but that's not what I built it for. The sound board doesn't get detected correctly either, but I can live without that. I've never seen a system crash as fast as this one does when you try to start X with the nvidia driver though. I see a couple lines of the X startup, and then the screen goes black and I hear the reboot start. I can use the standard VGA driver and start X and KDE, so Xorg doesn't seem to be the issue.

Greg
growe is offline   Reply With Quote
Old 09-16-06, 10:04 AM   #4
growe
Registered User
 
Join Date: Sep 2006
Posts: 3
Default Re: Asus P5B Instant Crash

Well, with a little hacking I managed to get this board working pretty well as a KDE desktop. I ended up using the generic NV module which I built from Xorg -current and then applied some patches that I found on an OpenSuse mailing list that added support for the 7600 GS PCI-E card:

http://lists.opensuse.org/opensuse-c.../msg00594.html

It's a 512mb card and I only seem to be picking up 256, but everything else is OK for now until I can figure out why the nvidia driver causes an instant crash on load.

Greg
growe is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
ARCTIC Accelero Xtreme III review (w/ Asus GTX680 DirectCU II TOP) News Latest Tech And Game Headlines 1 07-01-12 03:39 PM
Review of the 23-inch Asus VG23AH Passive 3D IPS Display News Latest Tech And Game Headlines 0 06-21-12 07:40 PM
Asus ditches Android for Windows 8 in new Transformer laptop/tablet News Latest Tech And Game Headlines 0 06-04-12 02:10 PM
ASUS GeForce GTX 670 DirectCU II Top Unveiled Features 1137MHz Boost Clock (WCCFTECH) News GeForce GTX 670 Reviews 0 05-10-12 06:30 AM

All times are GMT -5. The time now is 08:07 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.