Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 11-07-06, 07:45 PM   #1
sangu
Registered User
 
Join Date: Feb 2005
Posts: 84
Default 1.0-9629 doesn't get 1920x1200.

1.0-9629 doesn't get 1920x1200, but 1.0-9626 gets 1920x1200 in the same linux box.

Last edited by sangu; 04-22-11 at 08:13 PM.
sangu is offline   Reply With Quote
Old 11-07-06, 09:54 PM   #2
netllama
NVIDIA Corporation
 
Join Date: Dec 2004
Posts: 8,763
Default Re: 1.0-9629 doesn't get 1920x1200.

I have a few questions:
0) Why are you using a 1900x1200 modeline? Does commenting it out have any impact?
1) Please post a bug report against 1.0-9626 where the same modeline is working

Additionally, with 1.0-9629, please start X with the following command:
startx -- -logverbose 6

and then post a new bug report.

Thanks,
Lonni
netllama is offline   Reply With Quote
Old 11-07-06, 10:40 PM   #3
sangu
Registered User
 
Join Date: Feb 2005
Posts: 84
Default Re: 1.0-9629 doesn't get 1920x1200.

Quote:
Originally Posted by netllama
I have a few questions:
0) Why are you using a 1900x1200 modeline? Does commenting it out have any impact?
- 1920x1200 is optimized resolution in my lcd 23'.
- commenting out modes 1920x1200 in xorg.conf
* Detected 1280 x 768 in 9626.
Quote:
Originally Posted by "/var/log/Xorg.0.log
(--) NVIDIA(0): VideoBIOS: 05.41.02.49.68
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6800 GS at PCI:5:0:0:
(--) NVIDIA(0): UPV UP-M23W1D (DFP-0)
(--) NVIDIA(0): UPV UP-M23W1D (DFP-0): 155.0 MHz maximum pixel clock
(--) NVIDIA(0): UPV UP-M23W1D (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0):
(WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(WW) NVIDIA(0): will be used as the requested mode.
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 768
(--) NVIDIA(0): DPI set to (40, 43); computed from "UseEdidDpi" X config
* Detected 1280 x 768 in 9629, too.

Quote:
1) Please post a bug report against 1.0-9626 where the same modeline is working


Additionally, with 1.0-9629, please start X with the following command:
startx -- -logverbose 6

and then post a new bug report.

Thanks,
Lonni
Posting bug reporting log.

Last edited by sangu; 04-22-11 at 08:12 PM.
sangu is offline   Reply With Quote
Old 11-07-06, 10:54 PM   #4
netllama
NVIDIA Corporation
 
Join Date: Dec 2004
Posts: 8,763
Default Re: 1.0-9629 doesn't get 1920x1200.

I understand that 1920x1200 is the largest native mode for your DFP, however that doesn't explain why you're using a modeline, rather than letting the driver use use a mode defined in the EDID for your DFP.

Also, I still need to see the other bug report I requested.

Thanks,
Lonni
netllama is offline   Reply With Quote
Old 11-07-06, 11:43 PM   #5
sangu
Registered User
 
Join Date: Feb 2005
Posts: 84
Default Re: 1.0-9629 doesn't get 1920x1200.

Quote:
Originally Posted by netllama
I understand that 1920x1200 is the largest native mode for your DFP, however that doesn't explain why you're using a modeline, rather than letting the driver use use a mode defined in the EDID for your DFP.

Also, I still need to see the other bug report I requested.

Thanks,
Lonni
you're right, modeline is needlees comment in xorg.conf.
but, 1.0-9629 doesn't get 1920x1200.

attach file :
1.0-9629, commenting out modeline in xorg.conf ,
$startx -- -logverbose 6, nvidia-bug-report.log file

Last edited by sangu; 04-22-11 at 08:12 PM.
sangu is offline   Reply With Quote
Old 11-07-06, 11:50 PM   #6
netllama
NVIDIA Corporation
 
Join Date: Dec 2004
Posts: 8,763
Default Re: 1.0-9629 doesn't get 1920x1200.

Thanks, here's the problem:
(II) NVIDIA(0): Validating Mode "1920x1200":
(II) NVIDIA(0): 1920 x 1200 @ 60 Hz
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 154.00 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1920, 1968
(II) NVIDIA(0): HSyncEnd, HTotal : 2000, 2100
(II) NVIDIA(0): VRes, VSyncStart : 1200, 1203
(II) NVIDIA(0): VSyncEnd, VTotal : 1209, 1222
(II) NVIDIA(0): H/V Polarity : +/-
(WW) NVIDIA(0): Mode is rejected: Mode (1920 x 1200) is too large for DFP
(WW) NVIDIA(0): Native Resolution (Max: 1280 x 768).

Please try adding this option to xorg.conf:
Option "ModeValidation" "NoEdidDFPMaxSizeCheck"
netllama is offline   Reply With Quote
Old 11-08-06, 12:10 AM   #7
sangu
Registered User
 
Join Date: Feb 2005
Posts: 84
Default Re: 1.0-9629 doesn't get 1920x1200.

Quote:
Originally Posted by netllama
Please try adding this option to xorg.conf:
Option "ModeValidation" "NoEdidDFPMaxSizeCheck"
Quote:
Originally Posted by /var/log/Xorg.0.log
(**) NVIDIA(0): Option "ModeValidation" "NoEdidDFPMaxSizeCheck"
(**) NVIDIA(0): Using HW cursor
(**) NVIDIA(0): Enabling RENDER acceleration
(==) NVIDIA(0): Video key set to default value of 0x101fe
(WW) NVIDIA(0): Unrecognized ModeValidation token "NoEdidDFPMaxSizeCheck";
(WW) NVIDIA(0): ignoring.
http://download.nvidia.com/XFree86/L...ppendix-d.html
NoEdidDFPMaxSizeCheck option isn't in this page.
So, I add Option "ModeValidation" "NoDFPNativeResolutionCheck", because of having the same description. And, my probleme is fixed.

Thank about your comments.

Last edited by sangu; 11-08-06 at 12:20 AM.
sangu is offline   Reply With Quote
Old 11-08-06, 10:34 AM   #8
netllama
NVIDIA Corporation
 
Join Date: Dec 2004
Posts: 8,763
Default Re: 1.0-9629 doesn't get 1920x1200.

"NoDFPNativeResolutionCheck" appears on the README URL that you referenced. I'm not sure why you aren't seeing it.
netllama is offline   Reply With Quote

Old 11-08-06, 11:47 AM   #9
pe1chl
Registered User
 
Join Date: Aug 2003
Posts: 1,026
Default Re: 1.0-9629 doesn't get 1920x1200.

Quote:
Originally Posted by netllama
I'm not sure why you aren't seeing it.
It looks like there is a problem with the webserver or its network connection.
When loading that page it stops for lengthy amounts of time at random places in the page.
Due to the layout of the page it may not be obvious that it is not complete.
pe1chl is offline   Reply With Quote
Old 11-09-06, 01:25 AM   #10
K@sperl
Registered User
 
Join Date: Feb 2004
Posts: 1
Default Re: 1.0-9629 doesn't get 1920x1200.

I have absolutely the same problem but with 1600x1200 on my LCD screen.
Code:
Option "ModeValidation" "NoDFPNativeResolutionCheck"
works for me but it's only needed with 96xx versions.
K@sperl is offline   Reply With Quote
Old 11-09-06, 02:25 AM   #11
synixus
Registered User
 
Join Date: Nov 2004
Posts: 34
Default Re: 1.0-9629 doesn't get 1920x1200.

Quote:
Originally Posted by K@sperl
I have absolutely the same problem but with 1600x1200 on my LCD screen.
Code:
Option "ModeValidation" "NoDFPNativeResolutionCheck"
works for me but it's only needed with 96xx versions.
Too bad, not for me here on Dell Inspiron 8200 w/ GeForce4 440 Go here.
synixus is offline   Reply With Quote
Old 11-15-06, 12:45 AM   #12
DrReD
Registered User
 
Join Date: Nov 2006
Posts: 1
Default Re: 1.0-9629 doesn't get 1920x1200.

Quote:
Originally Posted by synixus
Too bad, not for me here on Dell Inspiron 8200 w/ GeForce4 440 Go here.
I may have a solution for you.

Try adding this to the "Screen" section only:
Option "ModeValidation" "NoDFPNativeResolutionCheck"

I noticed that if you put it in the "Device" section it does not work.

Since this forces the driver to use the display modes specified in xorg.conf instead of those it probed via EDID, you should also check that you listed all the resolutions you need in the "Display" subsection.

Here is an example:
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "ModeValidation" "NoDFPNativeResolutionCheck"
#Option "CustomEDID" "/tmp/edid.bin.DFP-0"
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection


EDID in .9629 is acting weird on the GeForce4. Apparently the driver probes the monitor correctly only via the 15 pin VGA connector, while it fails miserably if the same monitor is connected to the digital-VGA connector.

Additionally many of the "EDID" options documented at http://download.nvidia.com/XFree86/L...ppendix-d.html don't work correctly on the geforce4 (aka "they do nothing most of the time").

Kudos,
Davide Repetto

Last edited by DrReD; 11-15-06 at 12:57 AM.
DrReD is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Nouveau X.Org Driver Finally Releases Version 1.0 News Archived News Items 0 06-18-12 06:30 PM
Eurocom Monster 1.0: Clevo's Little Monster News Archived News Items 0 05-18-12 07:20 AM
nvidia drivers in a motherboard with AGP 1.0 (motherboard MVP3+) knocker NVIDIA Linux 1 08-19-02 01:57 AM

All times are GMT -5. The time now is 12:00 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.