|03-08-03, 03:47 AM||#1|
Join Date: Nov 2002
SuSe 8.1 NVIDIA - INSTRUCTIONS (GF2 Bug fixed)
This is how you can install all nvidia drivers for all cards on Suse 8.1, and this is also the way to fix the gf2 bug.
1) Load suse Linux 8.1 in failsafe mode
2) Log in as "root"
3) Type in:
"rpm -e NVIDIA_GLX"
"rpm -e NVIDIA_kernel"
(This should deinstall old linux drivers)
4) Then install your new drivers:
"rpm -ivh NVIDIA_kernel-1.0-4191.suse81.i586.rpm"
"rpm -ivh NVIDIA_GLX-1.0-4191.suse81.i586.rpm"
(Number 4191 changes per version of the driver)
6) Start Linux again in failsafe mode
7) Log in as "root"
8) Type in "startx"
9) Go into Yast2, configure a little bit around with your display settings
10) reboot, start normal
11) Enjoy the wonderful TuxRacer grafics
Please add this on the top of this forum mods, because I think there are a lot of people with a geforce2.
1: general term for any insect or similar creeping or crawling invertebrate
2: a fault or defect in a system or machine [syn: glitch]
3: a small hidden microphone; for listening secretly
4: insects with sucking mouthparts and forewings thickened and leathery at the base;
Last edited by MrBug; 03-13-03 at 02:49 PM.
|03-09-03, 01:46 PM||#2|
I can tell you from personal experience that this does not guarantee success. It maybe worked sometimes when using the original SuSE 8.1 kernel release; it doesn't work when after applying the newer 2.4.19-167 kernel released by SuSE to fix a whole bunch of bugs in the original kernel release.
See many other posts on this board to confirm it if you don't agree.
The problem with applying the newer kernel has to do with the disabling of AGP support. Insmod agpgart fails; and the the NVIDIA AGP will hand during X startup. To date, I have not seen a someone who has successfully resolved this problem using the newer kernel release; at least they have not posted a procedure to fix on this board.
I have given up trying to resolve this after weeks of fighting with it. I am using the XF86_GLX and MESA GLX for 3d acceleration with much better success than using NVIDIA's drivers.
|03-10-03, 07:31 PM||#3|
Join Date: Mar 2003
Location: Manteca Ca
This worked for me
I have SuSE 8.1 and I did an online update before I did this.
I had already done the rpm -i on the NVIDIA_kernel 4191 and it did not work.
I did the rpm -e on the NVIDIA_kernel and it told me that I could not do this as there was more then one package.
The trick then is to do an rpm -q NVIDIA_kernel
This will show you what else is there.
Mine had an old 0.8 level rpm. I removed it with the rpm -e and the newer 4149 started to work. I could not remove them both.
Now I have the eth0 nivida port working well. The 3D graphics working and if I su to root and do a modprobe nvaudio the sound works. Now I just have to figure out where to put the
"modprobe nvaudio" command so that it gets executed at the right time on boot.
|03-11-03, 01:01 AM||#4|
You can put 'modprobe nvaudio' in /etc/init.d/boot.local and it will load all the sound modules for alsa sound.
Doing an online update via YOU will not upgrade the original 2.4.19-4GB kernel that shipped with 8.1. You have to download that from the SuSE ftp site (or mirror site) and install via YAST or Kpackage or Gnorpm or via cmd line.
Like I said in my first post, the NVIDIA driver worked OK with the original 2.4.19-4 kernel. But that kernel release had a slew of other kernel bugs causing frequent freezes and crashes. If you haven't upgraded your kernel, you ought to consider it. There is even a 2.4.20 kernel out that you can download from ftp://ftp.suse.com/people/mantel/next if you want to.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Need Help Installing NVIDIA Tesla M2070Q in Linux RHEL5||Ferianto85||NVIDIA Linux||0||05-18-12 09:35 PM|
|Redhat 8.0 NVIDIA works - INSTRUCTIONS||STEEL1||NVIDIA Linux||267||04-15-03 07:48 PM|
|Suse 8.1 and Nvidia drivers||tombraider500||NVIDIA Linux||4||10-06-02 12:19 PM|
|Nvidia Problems in Slackware 8.1||xtreme||NVIDIA Linux||3||10-01-02 01:03 PM|