Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 03-09-03, 04:57 PM   #1
DaFire
Registered User
 
Join Date: Sep 2002
Posts: 9
Default x segfaulting when starting

I have a gf4 with 2 crt attached.. X-Config is working with nv module but when I change to nvidia it segfaults on start...
anyone an idea ?

Quote:
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-gentoo-r1 i686 [ELF]
Build Date: 09 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Mar 9 23:45:24 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** NVIDIA (generic) [nv]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "gb"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/m
isc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:u
nscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X1
1R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(--) PCI: (0:9:0) Brooktree Corporation Bt848 Video Capture rev 18, Mem @ 0xdddf
f000/12
(--) PCI:*(1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xde
000000/24, 0xd0000000/27, 0xddc80000/19
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4191
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4191
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
(II) NVIDIA XFree86 Driver 1.0-4191 Mon Dec 9 11:51:41 PST 2002
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD0000000
(--) NVIDIA(0): MMIO registers at 0xDE000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 Ti 4200
Segmentation Violation
DaFire is offline   Reply With Quote
Old 03-10-03, 03:17 PM   #2
adminc
Registered User
 
Join Date: Mar 2003
Location: Los Angeles, Ca
Posts: 7
Default slow as hell.

I had the same prob.

Try this:
in etc/x11 you have the file XF86Config-4
add Option "RenderAccel"
That helped mine a bit

And of course the lower ur resolution is and things it has to load such as: the files it loads in kde or gnome the u have all the things in services to...

Even check if ur dma is enabled on ur hd.. do this with hdparm.

I tweaked my system as i wanted and it toke the slow loading away. but dont ask me exactly what it was.

Hope this could give u some idea. maybee ??
__________________
-- ADMINC --
adminc is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
nvidia: The GeForce GTX 690 Live Review by PC Perspective and NVIDIA is starting in 5 News Archived News Items 0 05-15-12 05:30 PM
nvidia: Shhh, we're starting #gtc12 News Archived News Items 0 05-15-12 05:30 PM
Nview not starting?? can anyone please help? Cliff Pitt NVIDIA Windows Graphics Drivers 1 09-10-02 08:45 PM
No Errors with X, but X not starting hschwebler NVIDIA Linux 2 09-09-02 07:09 AM

All times are GMT -5. The time now is 02:20 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.