|
|
#1 | |
|
Formerly NrG
Join Date: May 2006
Posts: 33
|
Hey guys, I've gotten the following OC going:
http://valid.x86-secret.com/show_oc?id=182686 Now, the load temps are 54C according to PCProbe but CoreTemps suggests they reach 60C at times...which one is more accurate and are these temps way too high? Also, the overclock is Orthos stable for 4 hours.
__________________
AMD Athlon64 X2 4200+ @ 2.625Ghz (1.425v) Asus A8R-MVP X200 Chipset (282 FSB max) Powercolor X1950Pro Extreme 600/700 @ 644/728 2 x 512mb Corsair VS @ DDR434 Seagate 250GB 7200.10 + Maxtor Maxline 80GB Thermaltake Armor (modded) CM eXtreme 650W SLI (12V+ @ 36A) Aquagate LCS + CM Copper waterblock Viewsonic VX2235WM 22" LCD 5ms P4 2.26B OC A64 X2 4200+ OC 3DMARK06: 4759 |
|
|
|
|
|
|
#2 | |
|
R.I.P. Babe Thread
Join Date: Jun 2004
Posts: 12,387
|
Nope, those are fine. That's about what I get on my Opty 170.
|
|
|
|
|
|
|
#3 |
|
*BANNED*
Join Date: Nov 2006
Location: NN VA
Posts: 1,155
|
I'm using my parents' pc currently and i have the successor to your motherboard and I'm getting a consistent 38 C thru asus pc probe.
Same cpu, I'm using a p180B, 2 scythe for exhaust and mid vga fan is a 108cfm sunon. |
|
|
|
|
|
#4 | |
|
Registered User
Join Date: Nov 2006
Location: Ontario, Canada
Posts: 703
|
I would take Core Temps reporting.
Core temp reads from a digital sensor inside each cpu. Afaik pc probe doesn't.
__________________
2x1GB Apacer PC2-6400 @ 850mhz 4-4-4-15 || Asus P5N32-E Sli Plus || Zalman 9500 AT || 200GB SATA / 320GB SATA WD HD 3D Mark 06: 12461 || 3D Mark 05: 18397 || 3D Mark 03: 40149 |
|
|
|
|
|
|
#5 |
|
Mahna Mahna
Join Date: Jul 2006
Location: Madison, Wi
Posts: 6,123
|
54c with liquid cooling?? GOOD LORD MAN!!!! With the thermaltake blue orb air cooling my 4000+ runs @ 25c-28c idle and 35-38c load @ 2.7ghz. The dual cores really run that much hotter?? Seems a bit high.
__________________
|
|
|
|
|
|
#6 | |
|
Formerly NrG
Join Date: May 2006
Posts: 33
|
Quote:
__________________
AMD Athlon64 X2 4200+ @ 2.625Ghz (1.425v) Asus A8R-MVP X200 Chipset (282 FSB max) Powercolor X1950Pro Extreme 600/700 @ 644/728 2 x 512mb Corsair VS @ DDR434 Seagate 250GB 7200.10 + Maxtor Maxline 80GB Thermaltake Armor (modded) CM eXtreme 650W SLI (12V+ @ 36A) Aquagate LCS + CM Copper waterblock Viewsonic VX2235WM 22" LCD 5ms P4 2.26B OC A64 X2 4200+ OC 3DMARK06: 4759 |
|
|
|
|
|
|
#7 | |
|
R.I.P. Babe Thread
Join Date: Jun 2004
Posts: 12,387
|
Quote:
|
|
|
|
|
|
|
#8 | |
|
Formerly NrG
Join Date: May 2006
Posts: 33
|
Quote:
__________________
AMD Athlon64 X2 4200+ @ 2.625Ghz (1.425v) Asus A8R-MVP X200 Chipset (282 FSB max) Powercolor X1950Pro Extreme 600/700 @ 644/728 2 x 512mb Corsair VS @ DDR434 Seagate 250GB 7200.10 + Maxtor Maxline 80GB Thermaltake Armor (modded) CM eXtreme 650W SLI (12V+ @ 36A) Aquagate LCS + CM Copper waterblock Viewsonic VX2235WM 22" LCD 5ms P4 2.26B OC A64 X2 4200+ OC 3DMARK06: 4759 |
|
|
|
|
|
|
#9 |
|
Maximum Speed
Join Date: Dec 2005
Posts: 409
|
I'm idling at about 28-30 'C on each core, and I'm fully loaded up at 54/49'C using orthos.
Aren't Opteron processors able to take more heat than the regular X2's? Anyway....I'd consider anything under 60'C for an opteron to be ok. The biggest thing to remember about coretemp...while it does provide seemingly more accurate readings, that the internal diode it references is not "officially" factory calibrated by AMD and they offer absolutely no support for it's usage. The temp sensor from your mobo is usually accessed using a S I/O chip and is usually taken from the socket just below the die of the processor. hope this helps, JC
__________________
Asus M2N32-SLI Deluxe (silly 3 year old mobo can't do DDR1066 with Phenom....damn ASUS!) 4gb Corsair PC8500 XMS2 Thermaltake 750w PSU HIS Radeon 4870 1024MB 800/960 Cat 9.4 Beta Creative X-FI APU Western Digital 640gb Sata II Harddisk Logitech Z-640 5.1 surround speakers Lg 52X cd r/w and Lg 16x DVD R/W Lightscribe 3dmark06 14410 http://service.futuremark.com/compare?3dm06=8600451Newbs Helping Newbs brings a tear to my eye |
|
|
|
|
|
#10 |
|
R.I.P. Babe Thread
Join Date: Jun 2004
Posts: 12,387
|
My CoreTemp is reading around 39' C idle on both cores right now.
|
|
|
|
|
|
#11 |
|
Eastern Pipistrelle
Join Date: Jul 2004
Location: The Cave
Posts: 2,058
|
My 4800X2 idles at around 45 degrees but after gaming its up to nearly 60 degrees. I've always thought that was a bit high especially considering I have a Thermaltake Blue Orb II sitting on it. Its also O/C'ed to 2.6GHz, but the O/C only raises temps about 3-4 degrees at most. The rig is stable, so I never thought anymore about it especially since I'm building a new C2D rig soon.
__________________
CPU: Intel i7 2600k Video: EVGA GTX 590 / 24" BenQ FP241WZ LCD Motherboard & RAM: ASRock P67 Extreme6 / 16GB DDR3 RAM Storage: Corsair Force Series GT 128GB SSD / Western Digital Caviar Black 2TB / Two Seagate Barracuda 1.5TB drives Optical Storage: Pioneer BDR-206DBKS Sound: Sound Blaster X-Fi / Logitech Z-5500 OS: Windows 7 Ultimate (64-bit) Other: Antec P183 Case / Corsair AX-1200 Power Supply / Logitech G5 (v2.0) / Microsoft Natural Ergonomic Keyboard 4000 Console: XBox 360 Elite |
|
|
|
|
|
#12 | |
|
Die spammer!! DIE!!!
|
What is a good cpu temp monitoring app? I have a DFI board.
__________________
Quote:
|
|
|
|
|
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| AMD FX-8120 Black Edition CPU Review (with Asus M5A99X EVO) | News | Latest Tech And Game Headlines | 0 | 06-21-12 08:30 AM |
| AMD To Put An ARM Core On Future Fusion APUs | News | Latest Tech And Game Headlines | 0 | 06-13-12 06:00 PM |
| AMD Gooses the Clocks on 'Bulldozer' Opterons | News | Latest Tech And Game Headlines | 0 | 06-04-12 02:24 PM |
| CPUMark99 - how do you compare | fuelrod | Benchmarking And Overclocking | 66 | 07-19-11 08:32 AM |
| AMD vs Intel | druga runda | CPUs, Motherboards And Memory | 7 | 08-20-02 01:09 PM |