|
|
#1 | |
|
Registered User
Join Date: Mar 2007
Posts: 31
|
Hi,
So I figured out how to nominally run my nvidia-equipped lapstation with dual heads (nee screens) as needed, using the "nvidia" driver (I'm using rev 9755). My xorg.conf file is attached below. Note that what I've been able to do is *not* "hotplugging". To go from using just the builtin LCD screen to both the builtin LCD screen and an VGA-attached external screen simultaneously, I stop X (eg via Crtl-Alt-Backspace) and then restart it, and the external monitor turns on, as screen 0 interestingly enough. And the builtin LCD screen is also on, and sports a desktop, although I can't drag the mouse pointer over to it. So I was using the external screen desktop, and was stretching a window off the right edge of the screen, and somehow my mouse pointer was suddenly on the builtin LCD's desktop (apparently screen 1). I was not able to figure out how that happened, nor re-create it, nor figure out how to get the mouse pointer back over to the external screen desktop. Anyone have any thoughts on how this might have happened? How i might be able to get the mouse pointer to go between desktops at-will? Any obvious brokenness in the xorg.conf file? it's a hack and some of the stuff in there I just pulled off this list and ubuntu forums to try. thanks, =JeffH -------- Section "Files" FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/cyrillic" # FontPath "/usr/share/X11/fonts/100dpi/:unscaled" # FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" FontPath "/usr/share/fonts/X11/misc" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "i2c" Load "bitmap" Load "ddc" # Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" Option "XkbOptions" "lv3:ralt_switch" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ExplorerPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "SendCoreEvents" "true" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "0" EndSection #Section "InputDevice" # Driver "wacom" # Identifier "stylus" # Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB # Option "Type" "stylus" # Option "ForceDevice" "ISDV4" # Tablet PC ONLY #EndSection #Section "InputDevice" # Driver "wacom" # Identifier "eraser" # Option "Device" "/dev/wacom" # Change to # /dev/input/event # # for USB # Option "Type" "eraser" # Option "ForceDevice" "ISDV4" # Tablet PC ONLY #EndSection #Section "InputDevice" # Driver "wacom" # Identifier "cursor" # Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB # Option "Type" "cursor" # Option "ForceDevice" "ISDV4" # Tablet PC ONLY #EndSection Section "Device" Identifier "NVIDIA Default Card screen 0" Driver "nvidia" BusID "PCI:1:0:0" Screen 0 Option "MonitorLayout" "CRT,LFP" Option "DPI" "147x145" EndSection Section "Device" Identifier "NVIDIA Default Card screen 1" Driver "nvidia" BusID "PCI:1:0:0" Screen 1 Option "MonitorLayout" "CRT,LFP" EndSection Section "Monitor" Identifier "LCD Monitor" Option "DPMS" EndSection Section "Monitor" Identifier "External Dell2407WFP" VendorName "Dell" ModelName "2407WFP" Option "DPMS" DisplaySize 488 305 EndSection Section "Screen" Identifier "LCD Screen" Device "NVIDIA Default Card screen 0" Monitor "LCD Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1920x1200" EndSubSection SubSection "Display" Depth 4 Modes "1920x1200" EndSubSection SubSection "Display" Depth 8 Modes "1920x1200" EndSubSection SubSection "Display" Depth 15 Modes "1920x1200" EndSubSection SubSection "Display" Depth 16 Modes "1920x1200" EndSubSection SubSection "Display" Depth 24 Modes "1920x1200" EndSubSection SubSection "Display" Depth 32 Modes "1920x1200" EndSubSection EndSection Section "Screen" Identifier "External Screen" Device "NVIDIA Default Card screen 1" Monitor "External Dell2407WFP" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1920x1200" EndSubSection SubSection "Display" Depth 4 Modes "1920x1200" EndSubSection SubSection "Display" Depth 8 Modes "1920x1200" EndSubSection SubSection "Display" Depth 15 Modes "1920x1200" EndSubSection SubSection "Display" Depth 16 Modes "1920x1200" EndSubSection SubSection "Display" Depth 24 Modes "1920x1200" EndSubSection SubSection "Display" Depth 32 Modes "1920x1200" EndSubSection EndSection Section "ServerLayout" Identifier "Dual-Monitor Layout" Screen 0 "LCD Screen" Screen 1 "External Screen" # Screen 0 "LCD Screen" 0 0 # Screen 1 "External Screen" Below "LCD Screen" Option "Clone" "On" # Option "Xinerama" "On" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" # InputDevice "stylus" "SendCoreEvents" # InputDevice "cursor" "SendCoreEvents" # InputDevice "eraser" "SendCoreEvents" InputDevice "Synaptics Touchpad" EndSection Section "DRI" Mode 0666 EndSection --- end Last edited by =JeffH; 04-13-07 at 01:31 PM. Reason: added xorg.conf file |
|
|
|
|
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| quadro 1000m with 2 external monitors | stephenh | NVIDIA Linux | 1 | 06-14-12 04:04 PM |
| Arma 3 E3 hands-on preview: 8 important questions answered | News | Latest Tech And Game Headlines | 0 | 06-08-12 05:20 AM |
| FastM, AdrianHall, Questions About Leadtek TV 2000 | Essense | General Hardware | 3 | 09-29-02 11:15 PM |