|08-13-07, 06:46 PM||#1|
Join Date: Aug 2007
Asus P1-AH2 configuration
I just built this system P1-AH2
The system works great and installed Vista Home Professional. Then came the easy bit just connect it to a TV with WMC configured it should just work... What a mistake.
The TV is an old Panasonic 68c CRT and only has composite (yellow) on the back. I changed the connection in the NVIDIA control panel so it forces TV out and the post screen comes up but that's all.
The bios has a few setting so played with them but still nothing and its well above my knowledge base.
The setting in the bios are :
RGB/TV : Auto, CRT, TV
This is currently on AUTO
TV Mode : PAL-N and various other option
this was disabled tried PAL-N as am in Australia
Primary Display Adapter : PCI, On Board
tried both and both work as far as a display which is strange to me as it's on board.
In the NVIDIA control panel I went through the single use display option and forced the TV and had an option of HDTV come up. Chose that and still no display.
I have a MediaGate 35 and that system work a treat on this TV so I know that the TV is fine. It's just me and my lack of being able to set the system up.
Any help would be great.
|Thread||Thread Starter||Forum||Replies||Last Post|
|ARCTIC Accelero Xtreme III review (w/ Asus GTX680 DirectCU II TOP)||News||Archived News Items||1||07-01-12 04:39 PM|
|Review of the 23-inch Asus VG23AH Passive 3D IPS Display||News||Archived News Items||0||06-21-12 08:40 PM|
|Asus ditches Android for Windows 8 in new Transformer laptop/tablet||News||Archived News Items||0||06-04-12 03:10 PM|
|ASUS GeForce GTX 670 DirectCU II Top Unveiled Features 1137MHz Boost Clock (WCCFTECH)||News||GeForce GTX 670 Reviews||0||05-10-12 07:30 AM|