Go Back   nV News Forums > Linux Support Forums > NVIDIA Linux

Newegg Daily Deals

Reply
 
Thread Tools
Old 05-28-03, 08:32 AM   #1
iljamod
Registered User
 
Join Date: May 2003
Posts: 2
Default riva tnt 2 model 64 problem

Hi,
I have got two graphic cards in my PC:
1. RIVA TNT 2 Model 64
2. Onboard graphic chip 8 MB, that I canīt swith off in my Bios (there is no option for that)
Iīve installed SuSE 8.0 and everything was OK with the nv-driver, then I installed the newest NVIDIDA-driver. I canīt work on my PC more then 1 min and it always chrashes, but if I play any game, Iīve got no problems! The same problem I have under Windows, help me please.

/var/log/messages/
May 27 16:19:05 linux kernel: PCI: Found IRQ 11 for device 00:07.5
May 27 16:19:05 linux kernel: PCI: Sharing IRQ 11 with 00:0f.0


/var/log/XFree86.0.log

(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xE4000000
(--) NVIDIA(0): MMIO registers at 0xE6000000
(II) NVIDIA(0): NVIDIA GPU detected as: RIVA TNT2 Model 64/Model 64 Pro
(--) NVIDIA(0): VideoBIOS: 03.05.00.10.00
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0, TV-0
(--) NVIDIA(0): Detected TV Encoder: Brooktree 869
(WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
(WW) NVIDIA(0): using first display
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 250 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 250 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 215 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(WW) NVIDIA(0): The user specified HorizSync "28.000-61.000" has been adjusted
(WW) NVIDIA(0): to "31.000-61.000" (the intersection with EDID-specified
(WW) NVIDIA(0): HorizSync "31.000-61.000")
(II) NVIDIA(0): Monitor[0]: Using hsync range of 31.00-61.00 kHz
(II) NVIDIA(0): Monitor[0]: Using vrefresh range of 56.00-70.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 250.00 MHz
(II) NVIDIA(0): Not using mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(0): Not using default mode "576x432" (hsync out of range)
(WW) (1280x960,Monitor[0]) mode clock 108MHz exceeds DDC maximum 80MHz
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "832x624" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "416x312" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x512" (hsync out of range)
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0): Mode "1024x768": 74.5 MHz, 55.4 kHz, 69.1 Hz
(**) NVIDIA(0): Mode "640x480": 29.1 MHz, 35.0 kHz, 69.9 Hz
(**) NVIDIA(0): Mode "800x600": 43.7 MHz, 40.7 kHz, 65.1 Hz
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): Display dimensions: (300, 230) mm
(--) NVIDIA(0): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[b]
[1] 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[b]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
[8] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[b](B)
[9] -1 0xe6000000 - 0xe6ffffff (0x1000000) MX[b](B)
[10] -1 0xe8000000 - 0xe87fffff (0x800000) MX[b](B)
[11] -1 0xe9000000 - 0xe901ffff (0x20000) MX[b](B)
[12] -1 0xe8800000 - 0xe8ffffff (0x800000) MX[b](B)
[13] 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[15] 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0x0000e400 - 0x0000e403 (0x4) IX[b]
[19] -1 0x0000e000 - 0x0000e003 (0x4) IX[b]
[20] -1 0x0000dc00 - 0x0000dcff (0x100) IX[b]
[21] -1 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0x0000d400 - 0x0000d41f (0x20) IX[b]
[23] -1 0x0000d000 - 0x0000d00f (0x10) IX[b]
[24] 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[25] 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(WW) NVIDIA(0): Failed to verify AGP usage
(II) NVIDIA(0): Setting mode "1024x768"
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-GLX
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "CalcAlgorithm" is not used
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension RENDER
(II) [GLX]: Initializing GLX extension
iljamod is offline   Reply With Quote
Old 05-28-03, 08:37 AM   #2
DrOzz
Registered User
 
Join Date: May 2003
Location: Sydney, Nova Scotia
Posts: 70
Default

if its not in your bios then there will be a jumper on your motherboard to disable it.
DrOzz is offline   Reply With Quote
Old 05-28-03, 05:19 PM   #3
bwkaz
Registered User
 
Join Date: Sep 2002
Posts: 2,262
Default

I had the exact same problem 5-6 years ago with a Voodoo Banshee card. If I loaded up a 3D program (Need for Speed 3, at the time, was what I used), then it'd work. If I didn't, it would lock up after about a minute.

This was either Windows 95 or 98, I don't remember for sure.

The problem was that the card had been damaged in shipping. We sent it back to the reseller, who promptly sent us back the same (still broken) card again, so we sent it to Diamond, who replaced it for us. The new one worked fine.

Since the problems are cross-OS, that makes me think it's hardware related all the more.
__________________
Registered Linux User #219692
bwkaz is offline   Reply With Quote
Old 06-03-03, 12:56 AM   #4
iljamod
Registered User
 
Join Date: May 2003
Posts: 2
Default

I had looked at the board manual, there are no jumpers for that. I saw, that if I install a standard vga driver on WIndows or Linux (I have SuSE, RedHat, Debian) thereīs everything OK.
iljamod is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem connecting Pioneer VSX-S300 to Nvidia Ion - flat panel scaling solves it? wild_oscar NVIDIA Linux 3 06-17-12 07:18 AM
Post working out problem with 40.xx trying to work problem out, ONLY system specs b5fan NVIDIA Windows Graphics Drivers 11 10-19-02 09:17 AM
Riva TNT 2 - Debian (Woody) chipset problem sindra NVIDIA Linux 4 08-26-02 03:21 AM
TNT + geforce2 GTS w/ TV-OUT tim_wilson NVIDIA Linux 3 08-01-02 05:25 PM
Nvidia Go on laptop, black border within XFree86 problem raxip NVIDIA Linux 3 07-31-02 10:58 AM

All times are GMT -5. The time now is 06:17 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Đ1998 - 2014, nV News.